Band Saw - Automatic - Horizontal

HESSE by BEKA-MAK BMSY 360 DGH ECO

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm Gbsdpepuy H Dsfx Aanjw - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Gsdpfx Aolz Nxwsanjbw Weight of the machine approx: 2, 2 t Machine dimensions:

Condition: good (used), Year of construction: 2005, Manufacturer: Hazemag Type: AP-KH 1006 Rotor Dia. x W: 1.000 x 670mm. Inlet size: 690 x 350mm Included: – 55 KW E.motor Godpfxowu Urdo Aansbw – Control-cabinet – Hydraulic unit – Frame New Spare-parts in stock. See PDF-file below for more detailed information.

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Gbodpfx Aajvgcpcjnew Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg

Condition: used, Year of construction: 1985, thread dia. 254 mm Gbodjt Hw U Aepfx Aanjw grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, load capacity: 3,000 kg, lifting height: 7,650 mm, free lift: 2,610 mm, mast type: triplex, construction height: 3,220 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 2,430 mm, drive type: Elektro, construction width: 1,300 mm, Electric 4-wheel forklift Load center: 500 Fork width: 125 mm Gbodpfxet Ddwre Aansw Fork thickness: 45 mm Mast type: Triplex Technical condition: Good Front tires type: Non marking Rear tires Type: Non Marking Hydraulic sideshift

Year of construction: 2005, condition: good (used), TMG roller row, roller conveyor 45cm wide, in several lengths, gravity or driven version. Roll: 40 x 450 mm bearing shaft. Track width: 500mm plus side guides Length: 0.7-4m lateral guide rail on request Gsdpfx Ajgy Hapsanobw Meter price. Without drive: 150 euros With drive: 200 euros

Condition: good (used), functionality: fully functional, Geka punching machine model Puma 150/ ,punching power 150tm,hole capacity diameter 40 x28,neckline 750mm, in good condition. Godpfjrt Rrzsx Aanjbw

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine approx.LxWxH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Gedpfexcay Hox Aansbw Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: good (used), Year of construction: 2016, functionality: fully functional, Automatic CNC band sawing machine with 500mm carriage stroke Gsdpfx Ajrqgrdjanobw