Panel saw

HOMAG Sawtech CH 03/32/32 PLUS

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, Nwodoxranpepfx Anfsf checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: good (used), Year of construction: 2007, functionality: fully functional, NC-controlled drilling and dowel-inserting machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions: Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: maximum length 600 mm Equipment: - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue output Nsdpexdl Rasfx Anfewf - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel sizes: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feed 1. BASE MACHINE - Rigid welded steel frame construction - Axis travel in X, Y, and Z directions - Ball screw drives (Y- and Z-axis) and rack and pinion drive (X-axis) - Digital AC servo motor - Support table with left and right side stops and rear fence - Pneumatic center stop, manually actuated via selector switch - 6 overhead pneumatic clamps, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Condition: new, Year of construction: 2026, functionality: fully functional, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Nwsdpfetz Smijx Anfef Strong, professional sliding table saw with a movable table on bars and a separately powered scoring. Saw tilts in the 90–45 degrees range Solid, durable design ensures stability and work safety Controllable speed adjustment Technical data Table dimensions 970×550 mm Sliding table length 3200 mm Cutting width by the fence 1200 mm Transverse cutting by the transverse cutting guide 3100 mm Saw tilt 0°–45° Saw diameter Ø350 mm Saw hole diameter Ø30 mm Saw blade height 0–87 mm Saw blade 350 max height 105 mm Saw blade height at 45° angle 0–60 mm Saw blade 350 max height at 45° angle 73 mm Main saw spindle speed 4000 / 6000 rpm Scoring saw diameter Ø125 mm Scoring saw hole diameter Ø20 mm Scoring speed 8000 rpm Main motor power 5.5 kW Scoring motor power 0.75 kW Intake connector under table diameter 100 mm Intake connector diameter in the saw guard 80 mm Machine weight 680 kg Available equipment Cutting saw Scoring Transverse cut fence Longitudinal fence Modern - ergonomic saw guard Worktop extension Fence for mitre cutting Saw blade tilt gauge indicator User manual EC declaration of conformity

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Nodpowuz Npefx Anfewf Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, Year of construction: 2023, pressing force: 120 t, total length: 3,000 mm, total width: 1,300 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, opening width: 400 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons * maximum heating temperature 120 degrees * logic control system Nwsdpfxoqu U Hqe Anfjf * machine control from touch panel * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production * heating medium: oil with built-in heater. Machine brand new, available from stock.

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: HOLZMA Model: OPT HPP 350/43/43/X Machine type: Beamsaw Year of manufacture: 2005 Operating status: still connected Cutting length 4.300 mm Pusher stroke 4.250 mm Nwjdpfx Ajxwwfvonfjf Number of grippers 6 Feedrate max 130 m/min Continuously variable feed Saw blade projection 80 mm Saw blade diameter max 350 mm Main motor power 9 kW Scoring saw Yes Stop side Right side HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Conformity marking CE mark Weight 5.000 kg

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 Nsdpfxjwrn Efj Anfswf - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Nwedpfevvkd Tox Anfof Storage location: Nattheim

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition Nwodpfow H Rq Hjx Anfjf - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: used, Year of construction: 2011, Used machine Nsdpfx Anowka N Tjfewf Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice