CAN interface HC010

HOMAG

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Hsdpfx Apjzap H Ssysnn Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit Hedpfxszdzmko Apyjnn 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2007, Used CNC machining center Manufacturer: Homag Type: BOF 311/40/F/K Year of manufacture: 2007 Special features: 5-axis spindle with 15 kW "Drive 5+" (incl. vibration sensor) Workpiece thickness 300 mm incl. clamping device WoodWop 8.0 incl. Windows 7 computer 5-axis CNC cross-support machine; Cantilever table with 8 adjustable consoles, each with 2 suction cups, side and longitudinal stop bolts, LED position display for vacuum suction cups 6 sets of extraction rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units individually 4000 mm, pendulum max. 1550 (1375) mm Workpiece diameter 25 mm: individually 3475 mm, pendulum max. 1915 mm -Workpiece width: stop at the front: 1450 mm for all units / 1525 mm with workpiece diameter 25 mm Stop at the rear: up to 1600 mm / 1730 mm – Workpiece thickness: – Max. 300 mm including clamping device – Up to max. 60 mm with standard clamping device SAFETY AND PROTECTION DEVICES: EC compliant; SAFETY GUARD ON THE RIGHT WITH DOOR Left and rear: wall installation! Support equipment: 15 kW Drive5+ spindle and 30-position tool changer (chain) up to 24,000 rpm, vibration sensor Pick-up location for saw blade 350mm diameter Drilling head with 25 spindles (V19/H6/S0/90°) Hnjdpfx Apezdydzjyon AGGREGATE INTERFACE DRIVE5+ Chip conveyor belt TOOL TRANSFER LOCATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 140 M3/H Control system: POWERCONTROL PC85 with PLC CONTROL SYSTEM; WoodWop Version 8.0 WOODWOP-CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL SYSTEM TEXTS: GERMAN Delivery includes only the tools and HSK tool holders shown in the pictures!

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Feed Speed 8m/min Hjdpfszdklcox Apyjnn Joint Trimming Unit 40mm Quick Change Application Unit Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: excellent (used), Year of construction: 2018, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check Hedpezdki Ujfx Apyjnn 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. • Cutting width (programmable pusher): approx. 4,250 mm • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) Hnodpfxezdigne Apyon • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,800 kg, Edgebander manufactured in 2017. This HOMAG Optimat KDF 440 C features a workpiece thickness capacity of 8 - 60 mm and edge material compatibility of 0.4 - 8 mm. It offers a variable feed speed of 8 - 18 m/min and includes several units for joint trimming, glue application, and corner rounding. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KDF 440 C machine we have for sale. Contact us for further details. • Condition: Used • Workpiece thickness: 8–60 mm • Edge material: 0.4–8 mm (depending on unit configuration) • Feed speed: 8–18 m/min (variable) • Min. workpiece length: approx. 120 mm • Min. workpiece width: approx. 60 mm • Glue application: EVA hot-melt adhesive; PUR-compatible (optional) • Glue pot: Teflon-coated; quick-change capability • Total connected load: approx. 15–20 kW (depending on configuration) • Compressed air requirement: 6–7 bar Hnodpfjzdidasx Apyen • Control system: powerControl / powerTouch • CE marking: Yes • Unit configuration: • Joint trimming unit • Glue application unit • Pressure zone • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Scraper unit • Buffing unit

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, total height: 1,895 mm, total width: 1,980 mm, overall weight: 1,580 kg, spindle motor power: 5,000 W, product length (max.): 2,950 mm, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE OPTIMAT BHX 055 was manufactured in 2018. It features a workpiece length capacity of 200 - 3,050 mm and a workpiece width of 70 - 850 mm. The machine includes 13 vertical drilling spindles and 4 horizontal drilling spindles, providing versatile machining capabilities. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG WEEKE OPTIMAT BHX 055 machine we have for sale. Contact us for further details. Used Vertical CNC Machining CenterBrand: HomagType: Optimat BHX055Year of manufacture: 2018Technical data • Vertical CNC drilling and machining center • Workpiece length 200 - 3,050 mm • Workpiece width 70 - 850 mm • Workpiece thickness 12 - 60 mm Hnedpfszc R Hfsx Apyon • Milling spindle 1 unit • Main spindle power 5 kW • Max. speed 18,000-24,000 rpm (depending on configuration) • Tool holder HSK-F63 or ETP25 • Tool changer 4-position magazine • Vertical drilling spindles 13 • Horizontal drilling spindles (X) 4 • Horizontal drilling spindles (Y) 2 • Grooving saw X-direction • Control system Homag powerTouch / Power Control PC 86 • Software WOODWOP 7.x • Total connected load 11.5 kW • Compressed air requirement 7 bar • Machine weight approx. 1,580 kg • Footprint (L × W × H) approx. 2,950 × 1,984 × 1,895 mm • CE markingNote:The technical data and descriptions are copies of the original order confirmation. This information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2023, machine/vehicle number: Profi-HPP300/43/43, functionality: fully functional, operating hours: 4,134 h, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 3,200 mm, workpiece length (max.): 3,800 mm, HOMAG SAWTEQ S-300 profile line CNC panel dividing saw (Profi-HPP300/43/43) with a large touchscreen and a maximum speed of 150 m/min. Specifications Manufacturer: Homag GmbH (Germany) Type: SAWTEQ S-300 profile line Design: CNC panel saw Configuration: Profi-HPP300/43/43 Year of manufacture: 12-2023 Serial number: 0-240-87-3107 Control: large touchscreen Capacity/max.: 3,200 x 3,800 x 5,600 mm Speed: 150 m/min CE: yes Design/features Clamping bar Additional loose blades Ball-roller table with air jets Dust extraction pipes Receipt printer Homag/Pica Machine manuals available Recorded operating hours: Number of cuts: 31,843 Operating time: 4,134.18 hours Main operating time: 587.18 hours Condition Used Has already been professionally disassembled and moved by Kisjes Transport Apeldoorn (using a combination vehicle). Dimensions Assembled: 645 x 831 cm Photos Photo 1 to 21: assembled installation at its original location Hedpfjzd Dliox Apyjnn Photo 21 to 51: disassembled installation at the current storage location Auction information

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Hnedpfx Apjy In A Ajyjn Maximum panel thickness: 60 mm Operating Units: 8 nr