2 vessel brewhouse

Huppmann

Year of construction: 2008, condition: used, 5-vessel-brewhouse with additional whirlpool with a knockout capacity of 250 hl at 12° Plato. The brewhouse consists of a mash kettle, a mash decoction kettle, a lauter tun, a prerun vessel and a wort kettle with internal boiler. Furthermore, a classic whirlpool with wort cooling and wort aeration is installed. The brehouse is fully automated with the electronic process control "brewmaxx V7" and on basis of the operation system Windows. The brewhouse is completely made in stainless steel, but installed beneath the old copper hoods. The prerun vessel is "Outdoor"-installation, the whirlpool is - like the other brewing vessels - installed in the brewhosue room beneath a copper hood. Additional title: Modern brewhouse made of stainless steel, copper-clad Fpodpfxjw T St Us Aa Eod Cast wort capacity: 250 hl Operation / Control: Fully automatic with "brewmaxx V7" process control system Material: Stainless steel brewhouse with copper cladding Features: Mash tun kettle, mash kettle, kettle vapor condenser, lauter tun, spent grains bunker with spent grains conveyor, feed vessel, wort kettle with internal boiler, hop dispenser, spindle station, whirlpool, wort cooling, wort aeration, Various pumps, measurement and control technology, valves, control cabinets

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank Fsdpfx Aaowgc Udj Ejpd

Condition: new, Year of construction: 2025, roller diameter: 140 mm, roller length: 1,570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for the movement of the rear roller - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical roller - Brake motor - Emergency stop Fpjdpfx Aasgg Nv Io Esd - Documentation - 400V

Condition: used, Year of construction: 2012, Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmospheric monoblock bottling and capping machine for 33 cl bottles with filling capacity of 1,200 containers/hour. 2 compressors necessary for the operation of the bottling machine. 1 manual 6-spout filler for emergencies and special bottles. Semi-automatic adhesive labeler. 1 compressor necessary for the labeler. Ribbon printer for adding variables to the labels, with rewinder. 1 pallet truck. 6m x 2.50m x 3m high refrigeration chamber. Industrial scale. Including all sandwich panels from which the production rooms are made Fpsdpfx Aaouzpipo Eod

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, For sale: 500L EasyBrau brewhouse (Model SCB500/2, built 2016) – premium-quality Italian-built commercial brewing system designed for consistent output, efficient CIP cleaning, and user-friendly operation. Suitable for brewing up to 10HL per day. Fully refurbished at EasyBrau factory, completed 03-2025. Steam condenser upgraded in 2025 (enhanced steam/fume extraction and ventilation). Brewhouse configuration (3-vessel system): Consists of three primary tanks linked by a dedicated hydraulic transfer system: - Mash / Kettle / Whirlpool Tun: Features steam heating, built-in agitator, top manway, and tangential whirlpool inlet for effective trub removal. - Lauter Tun: Optimized for efficient wort separation with a rotating rake system, top manway, and side door for CIP and spent grain removal. - Hot Water Tank: Positioned below the lauter tun for space-saving, recovery of hot water for subsequent brews and cleaning cycles. Fsdpfx Aajx U Tf Ao Eepd Key systems & features: - Steam-heated brewhouse (rapid heating and stable boiling) - Integrated hydraulic transfer system for dense mash and wort transfer - PLC control panel with e-stop, pump/agitator controls, lighting, safety interlocks, and speed regulation - Connects to plate heat exchanger for rapid wort cooling pre-fermentation - Designed for CIP circulation cleaning (vessels, piping, heat exchanger) - CE-marked industrial equipment Included Extras: Ultrafilter 20” High Flow cartridge filter housing, high-capacity beverage/process filtration, low pressure loss, inline design for breweries, soft drinks, water, and hygienic processing. Includes 12 x Ultrafilter PF-UF High Flow Pleated Filter Cartridge 3µm. 8 x 500L Stainless Steel Fermentation Tanks – supplied as complete sets with all key fittings/accessories for professional fermentation. Ideal for small breweries, pilot facilities, or expanding cellar capacity. - 500L Fermenter (top TC cap) - Double jacket - Carbonation stone - Temperature gauge - Pressure/vacuum (spunding) valve (0.2–2.2 bar) - Sight glass - Glycol solenoid valve 2 x 10HL Fermentation Tanks: - Sight glass - Glycol solenoid valve Steam Generator – Ditta Arturo Mazzi & F. (Italy) – fully serviced 10-2025 Year: 2010 Model: AB Serial/Fabric No.: 4017 Volume: 53.2L Max. working pressure: 5.5 bar Steam temp: 163°C Steam output: 50 kg/h KegLand Cannular Fully Automatic – Single Lane Canning Line (KL25164): Compact, brewery-grade automatic canning line designed for fast, reliable double seaming with minimal operator intervention – ideal for taprooms, microbreweries, seasonal batches, or as a backup/machine for mobile canning. - Fully automatic fill and seam cycle - Fitted with B64 chuck for consistent seam integrity - Integrated flow meter for accurate filling - CO₂ purge inlet helps reduce dissolved oxygen - Sanitiser spray inlet - Automatic lid dispenser - Up to 700 cans/hour capacity If you have any questions, please do not hesitate to contact us. As the system remains installed, full demonstrations under operating conditions are possible.

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). Fsdpfsxcgy Hsx Aa Eopd The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: new, Year of construction: 2023, ACOUSTIC ROAD BARRIER PANEL PROFILE PRODUCTION LINE by Bosporas Machinery TURKIYE The line produces a perforated profile which are joined together to form Acoustic / Sound Insulation Panel used on roads, highways as a wall barrier. Consists of: DECOILER Motorized Hydraulic Expansion 6 Ton Capacity COIL CAR 6 Ton Capacity SERVO FEEDER ENCODER FEEDER HIGH-SPEED H FRAME PRESS (160 stroke/min.) HIGH-SPEED PERFORATION PERFORATION TOOL LOOP AND SENSORS ROLL FORM TURK HEAD SHEAR MOTORIZED CONVEYOR AUTOMATED JOINING UNIT Material 0.8 mm CR Steel BOSPORAS Technologies Machinery provides a complete turnkey metal roll forming solution with high quality and competitive prices. The lines that we are experienced: GUARD RAIL PRODUCTION LINES C, U, Z AND SOLAR PANEL PROFILE PRODUCTION LINE LOGISTIC WAREHOUSE TRAVERSE PRODUCTION LINE CABLE TRAY PRODUCTION LINE MARKET SHELVING PRODUCTION LINE SUSPENDED METAL CEILING PRODUCTION LINE SOALR FRAMING AND RACKING PRODUCTION LIGHTING FIXTURE BODY AND LID PRODUCTION LINE PANEL RADIATOR TOP AND SIDE COVER PRODUCTION LINE METAL GRID AND PLANKS PRODUCTION LINE METAL DOOR AND DOOR FRAME PRODUCTION LINE PVC WINDOW GYPSUM BOARD PROFILE PRODUCTION LINE AGRICULTURE AND ANIMAL HUSBANDRY PRACTICES AGRICULTURAL VEHICLE APPLICATIONS Fodpsk Iy Hmjfx Aa Eopd PAINTING PLANT PANEL PRODUCTION LINE AUTOMOTIVE INDUSTRY APPLICATIONS COIL PUNCHING APPLICATION HOUSEHOLD APPLIANCES INDUSTRY APPLICATIONS and other customized roll-forming machinery.

Condition: new, Year of construction: 2024, type of input current: three-phase, sheet thickness steel (max.): 2 mm, total width: 3,000 mm, total length: 32,000 mm, total height: 2,400 mm, coil weight: 6,000 kg, The roll forming line for the production of Scaffolding Systems. The line produces a perforated scaffolding profile in 24 stations. The line consists for Decoiler, Staightener, Servo Feeder, Mechanical Press, Perforating and Embossing Tool / Die and Roll Form Machine. For more, please contact us. Fpodjtq Sb Repfx Aa Eed

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Fjdeiq U Tqspfx Aa Eopd CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: like new (used), functionality: fully functional, mileage: 335,000 km, power: 411.88 kW (560.00 HP), first registration: 03/2023, fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, Scania 560 S Super NA *2023* Multiple units available for immediate delivery - Retarder - 335,000 km Fsdpfx Aajwp S Huo Eepd - First registration: 03/2023 - Stationary air conditioning - Double bunk - Dual fuel tank - Navigation system - Full LED headlights - Side fairings - Alloy wheels CUSTOMIZED FINANCING AND LEASING OPTIONS AVAILABLE ONSITE. From 24 up to a maximum of 96 installments, even with zero down payment. OUR GROUP'S OTHER LOCATIONS: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 – 377 7064530 OPENING HOURS: MONDAY–FRIDAY 8:30 am / 7:00 pm – SATURDAY 8:30 am / 2:00 pm WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer – Refrigerated Semi-trailer - Lamberet - Schmitz Isuzu – Fixed bed – Crane – Tipper – 4 axle – Rear 4 axle – Tway – T-Way-540-460 hp – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtain side – Box body – Tail lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl accepts no liability for any discrepancies relating to technical specifications, options, or features which may, in some cases, differ from those stated in the description. We advise you to check the specifications for the specific vehicle.