Machining center

HURCO VM 1

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: Prjdpfx Ahsrxfxhj Ujf 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display Power and Motors Pedpst N Autefx Ah Ujrf Voltage: 400 V Pluging: Three-phased Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: VMX106205017CHB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 457 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: Ultimax 4 system version 2.37.01e (Patch F) / 2.6.04i Table dimensions: 760 mm x 355 mm Travel X: 660 mm Travel Y: 355 mm Travel Z: 457 mm Spindle Spindle speed: 10 - 10,000 rpm Clamping device holder: SK40 Feed rates Rapid traverse X/Y: 22,500 mm/min Rapid traverse Z: 3,810 mm/min Tool changer Tool changer: 20-way MACHINE DETAILS Floor area (L x W x H): 2,600 mm x 1,600 mm x 2,500 mm Weight: approx. 3 t Pjdpfx Ahoxy Nq Ao Uerf

Condition: excellent (used), Year of construction: 2007, Vice NOT included Comes with a small selection of tooling. X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC Prjdpsxwlx Dofx Ah Uof

Year of construction: 1988, condition: used, weight max. in kg 6000 kg fork length 1900 mm 89% serial number GEF 2240 Prodjrxxbtepfx Ah Ujf height of stroke 3300 mm weight of the machine ca. 9650 t

Condition: ready for operation (used), Year of construction: 2006, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: VMX1-06229016BHB, travel distance X-axis: 660 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, table width: 762 mm, table length: 356 mm, TECHNICAL DETAILS Travel Paths Travel X-axis: 660 mm Travel Y-axis: 350 mm Travel Z-axis: 450 mm Table and Mounting Table clamping surface: 762 x 356 mm Mounting: SK 40 DIN 69871 Spindle and Tools Speed: 10 - 10,000 rpm Tool station capacity: 20 stations Control: ULTIMAX 4 MACHINE DETAILS Electrical Data Voltage: 400 V Number of phases: 3 Pedpfxjw Eiaqs Ah Usrf Frequency: 50 Hz Operating hours: 25,000 hours Dimensions & Weight Dimensions: 2,000 x 1,800 x 2,660 mm Weight: 2,900 kg

Condition: used, Year of construction: 2006, Offer, subject to change: 1 used vertical machining center Manufacturer: Hurco, Type VM1, Serial number H-V12319, Year of manufacture: 2000 Control: ULTIMAX 4 Table dimensions: 762 x 356 mm X travel: 660 mm Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 – 10,000 rpm Tool changer: 20-station SK40 tool holder Rapid traverse rates X/Y/Z: 28 m/min Drive power: 11 kW Prjdpowl H Rmefx Ah Ujf Space requirement: L x W x H: 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Condition: excellent (used), Brand: KENT Pedsh Ha Ipopfx Ah Uerf Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: good (used), Year of construction: 2007, No longer required in production. Parts are no longer required. Pedpfx Aoumt D Heh Uorf

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Pjdpotzyx Tofx Ah Uerf Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher