Pillar drilling machine

Huvema HU 32 NTI

Condition: new, Year of construction: 2025, Semi-automatic sawing process with automatic clamping, sawing, and raising of the workpiece to preset height after the cut is finished Stepless hydraulic cutting pressure and feed monitoring at the saw band press. Therefore, optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal application with different cross-sections, materials, and frequently changing miter cuts The machine control complies with CE standard 89/289 Technical data: round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 Rapid feed lowering of the saw frame to the material edge by push button Manual miter adjustment from 90° - 30°, infinitely variable on a scale The miter pivot point is the intersection between the saw band and the fixed clamping jaw, resulting in no length change when adjusting the angle Hydraulic full-stroke workpiece clamping - CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant device with electric immersion pump Central machine operation Saw band drive with end stop Movable band guide arm, adjustable to material width Saw band deflection roller with carbide guide Chip cleaning brush, rotating Saw band tensioning with torque wrench Painting silver-grey/blue-grey (RAL 7001/RAL 7031) Remnant length: 25mm Cutting speed: AC frequency-controlled drive 15-150 m/min continuously adjustable at the control panel Drive Saw band 3.0 kW; 400V, 50Hz Hydraulics 1.1 kW Godpfxehppabe Afcekd Coolant pump 0.1 kW Saw frame feed: Continuously up to 300mm/min, hydraulically controlled Saw band tension: Mechanically with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser light Micro-spraying device Clamping pressure regulator Support table on the feed side

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Gkodpeu Ix Izsfx Afcjd Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: new, Bernardo universal lathe Titan 660 x 2000 Technical Specifications Centre distance 2000 mm Centre height 330 mm Swing diameter over bed 660 mm Swing diameter over cranking 900 mm Swing diameter over cross slide 460 mm Bed width 400 mm Spindle bore 105 mm Spindle mounting DIN 55029, D1-8 Speed range (16) 25 - 1600 rpm Range of longitudinal feeds (25) 0.044 - 1.48 mm/U Plan feed range (25) 0.022 - 0.740 mm/U Metric threads (54) 0.45 - 120 mm inch thread (54) 7/16 - 80 Gg/1″ Pinol diameter 90 mm Sleeve travel 235 mm Sleeve holder MK 5 Engine power 7,5 kW (10,0 PS) Gjdpofbbx Rjfx Afcskd Machine dimensions (W x D x H) 3630 x 1200 x 1520 mm Weight approx. 2900 kg Features & Benefits Versatile application possibilities in general mechanical engineering, production, single part production, ... Central, handy switch for feeds and threads with guide and feed spindle Prism bed made of grey cast iron, inductively hardened and precision ground Modern main spindle bearings with angular contact roller bearings in precision design Hardened and ground gears and shafts, also in the feed gear Rapid traverse lengthwise and flat as standard to reduce non-productive times Large spindle bore (105 mm) for large diameter workpieces Soft start due to the mechanical multi-disc clutch Electromechanical foot brake to reduce non-productive time Best cutting performance even during face turning For stiffening the bed guide and for minimizing

Condition: excellent (used), Grinding length 1000 mm Gksdpfxek Abxxs Afced grinding diameter fi 350 mm In very good condition.

Condition: good (used), Year of construction: 1989, machine/vehicle number: 01-15792, Offer 24194 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - max. stroke upper beam 85 mm - Max. adjustment of bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm Gsdpstylguefx Afcjkd - Weight approx. 1620 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Bed Type Milling Machine Lagun GBR 42 Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel paths: X: 4000 mm Y: 1200 mm Z: 1000 mm Spindle speed (max.): 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg Swivel head: 45° diagonal milling head with 2.5° indexing Tool changer: Drum type with 24 tool stations (vertical tool change) Machine enclosure: Front enclosure with 2 doors, rear enclosure with additional door, side louvres for machining overlength workpieces Chip conveyor longitudinal (discharge right) Control cabinet with air conditioning Swivel arm for machine control (operation from rear and front) Godpfxexp Nxlj Afcokd Machine can be inspected under power. Available immediately.

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Gedpfxewm Nn Rs Afcjkd

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Gjdpfx Aewm D Ilefcjkd Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Year of construction: 1988, condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Gkodpfx Ajbu Em Asfcod Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Gkedoxgdfbopfx Afcod Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg