Vacuum chamber dryer

Italy 3 m3

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Itjdpsy Nkuwsfx Ag Ueh Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Condition: good (used), Year of construction: 1990, 1x HOT PRESS for VENEER “SORMEC” TYPE 350X130 Hydraulic hot press for wood, panels, furniture, doors, composites, and various materials Technical data: Platen dimensions: 3500 x 1300 mm 1 USEFUL WORKING PLATE Platen heating by hot water Total pressure: 50 tons Opening: 300 mm 8 cylinders, diameter 85 mm Water boiler not included Isdpfx Asyv Izbeg Ueth Overall dimensions: 4500 x 1600 x 2500 mm (H) Weight: approx. 5000 kg Second-hand, in good condition

Condition: used, Year of construction: 2004, Storage location: Nattheim Itjdpfsvvi Hysx Ag Ueh

Condition: good (used), Code: 0388 Brand: SAC Model: FS 530 Surface planer with ‘Tersa’ knives for joinery, furniture, custom-made furniture, wooden joinery, doors, timber framing, sawmills, plastics and various Features: Rigid steel base Ground and balanced steel spindle Low noise level Tilting fence from 0° to 45° Itedpfey Spqcox Ag Uoh Feed indicator Shaft with ‘Tersa’ knives Technical data: Working width 530 mm Total table length 2890 mm Table height 800 mm N° 4 knives Max pass 20 mm Motor 4 Hp Tilting guide – dimensions 120 x 160 mm Overall dimensions mm 2890 x 900 x 96o h Weight kg 800

Condition: good (used), Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent Itjdpfx Ajy Ti Ecsg Uoh The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Condition: excellent (used), functionality: fully functional, COPY SHAPER and SANDER machine , automatic , model BALESTRINI CP 90 - 4 second hand machine working condition : Excellent CE mark : YES with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one 1+1 shaping / sanding units . motor power each one Hp 4,5 / 6 ( 2 speeds ) max. working width mm.500 max. workinh heigth mm.180 max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:18 m/min. hydraulic carriage return speed: 75 m/min. Iodjx A Hatspfx Ag Uoth volt. 380/50

Condition: excellent (used), functionality: fully functional, AUTOMATIC MULTI RIP SAW model SCM M2 second hand machine carpet with integral cast iron elements in good condition general condition of the machine: Excellent laser pointer for cutting line reference automatic lubrication system CE mark : Yes instruction booklet: YES . in Italian language Technical details : carpet width mm. 220 max.height of cut mm.120 Itjdpfey U E Icex Ag Ujh max.working width mm.200 minimum length of cut mm.290 max.diameter of blades mm.350 min.diameter of blades mm.200 main motor power Hp 25 ( Kw 18,5 ) feed motor power Hp 1,5 ( Kw 1,1 ) arbor speed rpm 3600 variable carpet advancement speed. from 6 to 48 mt./min. net weight kgs. 1600 volt. 380/50

Condition: new, functionality: fully functional, TECNOMAC PCO 3013 HOT HYDRAULIC PRESS BRAND NEW MACHINE – V380/50 – “CE” Table size: 3000 x 1300 mm SOLID PERFORATED STEEL PLATENS Aluminium platen covering Platen heating with diathermic oil Oil boiler: 27 kW Number of pistons: 6 Ø 100 mm Ijdpfx Agsy Sm S Rs Ujth Total pressure: 120 TON

Condition: excellent (used), functionality: fully functional, working width: 300 mm, SECOND-HAND MULTIRIP SAW TYPE COSMEC SM320 - Working width mm. 300 - Motor Hp 40 Itodpfxjywfhze Ag Uoh