Automatic Signature Punching Machine / Automatische Stanzmaschine

JAMES BURN Lhermite EM 520

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW Dkjdpjuf Sy Aefx Apwsl - Compressed air supply: 6 – 7 bar

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Dksdpfjxdmxlsx Apwsl

Year of construction: 2018, condition: excellent (used), Max sheet size: 1080 x 780 mm Max single product to take out: 450 x 450 mm Min single product to take out: 30 x 30 mm Paper pile height: 40 - 100 mm Dsdpfx Aeu I U N Uepwokl

Condition: good (used), Offered is a plotter. Dkedpfjmdranox Apwsl Manufacturer: Canon, type: IPF 9100, ID-No.: AGL00062 location salesroom, location: 50668 Köln,

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Case size range: Approx. 140 × 200 mm – 670 × 390 mm Dksdpoxz D Ncefx Apwjl Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Machine weight: ~2.5 – 3 tons

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Gathering towers VAC 60a+m+m+m ST40, Horizon ASF 30, SPF 30 Trimmer HTC 30 Counter reading only 14.2 million Dksdpfx Ajvmfxgopwjl

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Dkjdpfx Apeh Eibaswsl Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, Year of construction: 2009, Fully Automatic 4-Clamp Perfect Binder from HORIZON The Horizon BQ-470 is a versatile perfect binder ideal for medium and small runs, as well as single-copy production. With its user-friendly operation and flexible applications, the Horizon BQ-470 is the perfect choice for your bookbinding needs. Key Features: Dsdpfx Aoycftgjpwekl - Easy to use 10.4-inch color touchscreen allows even less experienced operators to create high-quality bindings without problems - Advanced rotating suction feeding system speeds up production by handling many types of cover materials without leaving marks - Automatically adjustable scoring position (4 lines) ensures professional bindings with sharp, square spines Specifications: - Book block size: Max. 320 x 320 mm, Min. 145 x 105 mm - Book thickness: 1 to 65 mm - Cover size: Max. 320 x 660 mm, Min. 135 x 225 mm - Cover weight: 81.4 to 302.4 g/m² (plain paper), 104.7 to 348.9 g/m² (coated paper) - Production speed: Up to 1,350 cycles per hour (EVA), up to 1,000 cycles per hour (PUR) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Foldingmachine for 8 pages ! Make: HEIDELBERG-Stahlfolder Type: TI 52-4 - 4 - RD Format: 520 mm built: 2010 Mach.-Nr.: 1224431350 - Continuus feeder - double infeed-suction-wheels Dodpfx Aew I S Eyepwjkl - 1. fold-station 52 cm, 4 buckles - 2. fold-station 52 cm, 4 buckles - anti-noise-hood - center control-station for all functions - standard delivery - compressor - tools, technical documentation Price on request ,-- / FCA ex DK Availability: Immediately ! Please ask for further detailed pictures ! Video available !

Condition: used, Year of construction: 1998, Falzmaschine / Folding machine Heidelberg TD66/6-4-2 Year 1998 Round Pile Feeder  Folding Type 6 - 4 - 2 buckles Press Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dkedpfxouhiqqj Apwel On Stock Emskirchen / Nürnberg - Can be test