Crane

JMG MC 180S

Condition: used, total length: 5,600 mm, Year of construction: 2023, load capacity: 18,000 kg, - Funkfernbedienung für alle Kran- und Auslegerbewegungen. Falls vorhanden auch Bewegungen von hydraulischen Anbauteilen - Vorderachse Antrieb mit Gegenläufer Bewegung - Abnehmbare Kontergewichte - Proportional ausfahrbarer hydraulischer Ausleger - Frontabstützungen - Vorderradantrieb Nr. 2 Elektromotoren AC 8,5 kW 80V. Isolationsklasse H - Eigengewicht 21.610 kg - Abnehmbare Kontergewichte 6.110 kg - Batterie: 96 V - 1.035 Ah - Gewicht Batterie: 3030 kg - Reifen: Vorne: Nr.4 superelastich 355x50-20” / Hinten: Nr.2 superelastich 355x50-20 Godjzzfzgspfx Ag Touh - Reifen Hersteller: Trelleborg - Farbe: grau - Lenkung: über die Hinterachse / Lenkwinkel 90°/90 - Elektronische Lastbegrenzung - Automatisches Bremssystem an allen Rädern - Hergestellt aus vorgefertigten und verschweißten Stahlplatte - Auslegerwinkel +65°/-6° - Elektromotor N° 2, 23 kW - 96 V AC, 16 kW - 96 V Isolationsklasse - Radstand: 3100 mm - Bodenfreiheit Mitte: 170 - Höhe Kabine: 2100 mm

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Gsdpfxezv Syfo Ag Touh Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: used, functionality: fully functional, load capacity: 18,000 kg, lifting height: 11,900 mm, fuel type: electric, mast type: telescopic, construction height: 1,990 mm, empty load weight: 21,650 kg, total length: 5,540 mm, drive type: Elektro, construction width: 2,000 mm, Pick & Carry Crane Mast type: Telescopic Guedpjt Dd Uwsfx Ag Toh Technical condition: good Front tires type: Non Marking Rear tires Type: Non Marking Remote control

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Wheel diameter max 2000 mm 700 mm wheel width Machine weight 35,000 kg Guodpfx Agjza Egbe Tjh Space requirements approx. 6.9 x 8.4 x 3.7 m

Year of construction: 2010, condition: ready for operation (used), - USED - CNC DOUBLE RAM VERTICAL LATHE MAX ROTATING DIAMETER: 3000 mm MAX TURNING HEIGHT: 800 mm MAX TURNING DIAMETER: 2800 mm SPINDLE: 1-160 rpm; 71-114 kW; 68500 Nm; 2500 mm X-AXIS TRAVEL: -150+1780 mm Z-AXIS TRAVEL: 900 mm RAPID FEEDS X-Z: 8 - 10 m/min TOOL MAGAZINE: BASKET-TYPE ; TYPE CAPTO C5; 24 POS. POS CONTROL UNIT: SIEMENS 840D MAX ADMITTED LOAD: 15000 Kg WEIGHT: 54000 Kg ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER ; AUTOMATIC DOOR ; Guedpfx Agsyyrh He Tjh HEAD COOLING SYSTEM ; PORTABLE HANDWHEEL ; TOUCH PROBE

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, overall weight: 5,143 kg, controller manufacturer: HAAS, controller model: NGC, number of axes: 3, This 3-axis HAAS ST-30Y was manufactured in 2023. It features a maximum turning diameter of 349 mm and a maximum workpiece diameter of 521 mm. The machine is equipped with a turret capacity of 12 tool stations and a chuck diameter of 254 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-30Y horizontal turning machine we have for sale. Contact us for further details. • Number of tool slots: 12 tool stations • Main electronic connection: 400 V • Chip conveyor: HENING 103173 belt chip conveyor (2023) • Lubrication tank: Automatic central lubrication system • Year of manufacture: 2023 • Serial number: 3126818 • Maximum turning diameter: 349 mm • Maximum workpiece diameter: 521 mm • Chuck diameter: 254 mm (10") • Live tool power: 9 kW • Live tool speed: 4,000 rpm • Work lights • Coolant tank with pump • SAMCHULLY HS-10VI hydraulic chuck • BMT65 turret • Spindle speed range: 50-3,400 rpm Technical Specification Through-spindle Coolant No Gusdpfszk Eguex Ag Tjh Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Guedpfx Aszk U Rpeg Tsh Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control system, 32 mm spindle bore, Turret with driven tools, Counter spindle, Godpfx Aezqbn Usg Tsuh Tool magazine, High-pressure pump.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, turning length: 2,200 mm, turning diameter: 630 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 2,330 mm, bar passage: 117 mm, Specifications Chuck diam. 450 mm 11′ Capacity Turning length: 2255 mm 1st Spindle Spindle nose: A2-11 ASA Bar capacity: 117 mm Spindle speed: 10-2000 rpm Motor power: 30/37 Kw C axis: si degrees 1st Turret Motorized turret: 12 Tailstock Cone: 5 CM Maximum swing over bed: 775 mm Maximum turning diameter over carriage: 630 mm Maximum turning diameter over bed: 690 mm SPINDLE Spindle bore diameter: 132 mm Draw tube internal diameter: 117 mm Main spindle motor power: 30/37 kW Number of mechanical speed ranges: 2 Maximum spindle motor torque (continuous / 30 min): 1980 / 2450 Nm CARRIAGE X-axis travel: 350 mm Z-axis travel: 2330 mm X/Z axis motor power: 7/7 kW Carriage guide inclination: 45° TAILSTOCK Tailstock travel with carriage coupling: 2255 mm Gjdpjy Uk Eajfx Ag Touh Quill diameter: 160 mm Quill travel: 150 mm Maximum quill thrust: 2851 kg Machine dimensions: 6521 × 2154 × 2374 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment Guodey Dc Niepfx Ag Tsh • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50