CNC FLAT BAR & ANGLE PUNCHING / SHEARING

Kaltenbach APS TOP LINE

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm Cjdpfefqicxjx Ah Hsgn longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: used, Year of construction: 2006, Technical details: Cgodpou Ibu Rjfx Ah Hen bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: used, 5tSWF Krantechnik GmbH Cgsdpfx Aodc A R Tsh Hjn

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotatable Telehandler Mast Type: Telescopic Technical Condition: New Front Tires Type: Pneumatic Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Description: The vehicle is UVV-tested. A&M pallet fork carrier set includes 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd valve, 4th valve, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, PEGASUS 60.30 St.V TÜV/Dekra approval, 20 km/h axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED headlights on the rigid boom, 7-pin socket on the upper carriage, car radio pre-installation kit with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated front-wheel drive and electrical pre-installation for 3-motion equipment, wheel set with 18R22.5XF MICHELIN off-road tires, semi-automatic air conditioning, removable windshield protection for the cab, kit for driving with 180° upper carriage rotation, boom vibration damping, integrated rear view camera with 7-display (not compatible with 7-monitor with digital camera on the telescopic boom). Telematics kit (DTS) Road lights (front) with LED daytime running lights Cabin with laminated glass windscreen, pre-installation for saw Woodcracker Three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg Pallet fork carrier plate including load hook A&M, width 1, chain forks FEM4A, tines: 150x50, length 1.2 m, load capacity Csdpjw Eqdwofx Ah Hogn

Condition: used, machine/vehicle number: GL 02D 080093, Year of construction: 2008, Offer 25369 Technical Data: - Max. load capacity with full counterweight: approx. 250 kg - 4 pcs. vacuum glass suction cups, 200 mm - Lifting height (center of uppermost suction cup): approx. 2.5 m - Separate height adjustment & rotation device - Min. installation height: approx. 1285 mm - Max. installation height: approx. 2720 mm Codpfxexurq Is Ah Hegn - Max. overall length: approx. 2100 mm - Min. width: approx. 620 mm - Operating weight depending on counterweight: approx. 260 to 410 kg - Charger: 220 V - Battery: 12 V - Operating manual

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, pressing force: 80 t, Equipment: safety light barrier, Brand: Amada Type: ITS 80-25 Year of manufacture: 1994 Pressing force: 80t Bending length: 2500mm Throughput: 400mm Stroke: 100mm Power: 9.5kW Overall dimensions: 3010*2230*2230mm Weight: 4950kg Cgjdpfx Ajvncifeh Hen

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm Cgsdpfohzbipox Ah Hen - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Codpfxsf Sqcks Ah Hsgn Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded. Please just contact us, we will be happy to advise you without obligation.

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m Cgedpellvr Djfx Ah Hjn - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A Csdpfog Ixumox Ah Hjgn