Fully automatic band saw

Kaltenbach KBS 851 DG

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. Nsdpjrr Sqljfx Ah Uodf The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam Ndedpfx Ahohzbipj Uof - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Ndjdpfx Ahowlkwwe Usf

Condition: good (used), Year of construction: 1986, 1 used universal cylindrical grinding machine type SA 5 /630 year of construction 1986 center height 140 mm Circulation over bed 280 mm Center width 630 mm Table speed 0.05 - 6 m / minute Coolant system Njdpfx Ahoul Agbs Ujdf Weight 4.5 tons Technical data Errors excepted

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Ndjdpfxsufhzvo Ah Ujf Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Nedpfx Ahed Hmnfe Ujdf Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and

Condition: used, Price: On request Overhead crane Abus Lifting capacity: 6300kg Lifting height: 7500mm Span: 19000mm Total crane weight: +/- 4000kg Be disassembled and prepared for transport by us. - Documentation available: No Nodpfx Aowh Niqjh Uedf - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm Nsdpfxoirax Us Ah Uedf -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: new, pressure: 600bending length: 6050column width: 5100daylight: 680stroke lenght (max.): 455column throat depth: 450messurements (LxWxH): 7100x3275x3910weight approx.: 50.2004 axes (Y1, Y2, X, R): Ja alle Achsen über die Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Esa S630 (2D Grafik Steuerung)motor power: 45Standard Equipment:KK Kletzer Europa We have developed a high-quality model specifically for the European market:The CNC press brake by KK Industries, made in Turkey. Ndodpsd Ehh Refx Ah Uef Model: KK Kletzer EUROPA XL The powerful EUROPA XL press brake stands out for its high precision, accuracy, and versatile offers a very large open height, resulting in a long cylinder stroke, and an extra-large throat depth to provide maximum flexibility during operations. We focus on delivering quality—reflected also in the control system:As standard, the machine comes equipped with the ESA S640 2D graphic controller. Additionally, the KKI EUROPA XL is equipped with CNC-controlled Y1, Y2, X, and R axes via the wning is also included and fully CNC-controlled through the same ESA S640. When it comes to tooling, we make no machine is fitted with premium top tools and dies from EUROSTAMP Italy. Naturally, a machine is only as good as the service behind t’s why we rely on highly qualified staff with many years of experience in CNC sheet metal processing. Technical Highlights: CNC axes: Y1, Y2, X, and R Controller: ESA S640 (2D graphical interface) Backgauge with double linear guides and ballscrews Motorized CNC-controlled crowning system Heavy-duty height adjustment with handwheel(from 175 tons: on linear guides) Laser safety system on the upper beam CE-compliant safety equipment Various options available Optional Controllers: ESA S640 – 15” 2D Touchscreen: ¤ 4,520.00 ESA 675 W – 21” 3D Touchscreen (Windows-based): ¤ 6,485.00 DELEM DA-66T – 17” 2D Touchscreen (Windows-based): ¤ 10,165.00 DELEM DA-69T – 17” 3D Touchscreen (Windows-based): ¤ 16,350.00

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW Ndsdpswikatsfx Ah Ujf werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!