Band saw

KASTO Kastotec A3

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm Podpfx Asu R R Acsh Uerf width 2150 mm height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2003, Offset 6 color with coating Roland 706/3B+LTTLV (UV) Year: 2003 Number of impressions (mio): 500 Machine control - RCI - IntelliTrax II density control Feeder - Non-Stop feeder - Logistic system in feeder Printing units - Number of printing unit(s): 6 - Straight machine - APL Full Automatic Plate Change - Automatic blanket washing device - Cooling system: Technotrans - Ink temperature control Coating - Number of coating unit(s): 2 - Number of transfer unit(s): 2 Prodouhtg Ajpfx Ah Uef - Tresu chambered ductor blade system - Number of Anilox roller(s): 2 Drying - IR dryer between coating unit 1 and 2 - IR + hot-air dryer in delivery - UV dryer in delivery: Eltosch Delivery - Non-Stop delivery - Powder spray: Grafix Cantronic 3000 - Logistic system in delivery Elevation - Machine raised by (cm): 50 Accessories - Air cabinet: Becker - Cabinets air cooled - Compressed air compressor, excluded

Condition: new, We have different electronic parts for DMG machines, BOSCH,Siemens .... Prodpoddxv Usfx Ah Usf On Your request I will send detailed photos of all parts.

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 760 mm, table length: 2,000 mm, table load: 1,400 kg, IKZ 15 BAar Measuring probe MP12 Bohrzyklus with torq depending Performance package Pendel screen Interface set X - Travel: 1740mm Y - Travel: 760mm Z - Travel: 660mm Table Length: 2000mm Table Width: 760mm Table load: 1400 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Prjdpfxow Rntre Ah Ujf Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 4450mm Width: 3460mm Height: 2900mm Weight: 10500kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Deckel Maho DMU 50 EVO Linear with ITNC 530 About the machine: Fast and flexible 5-axis simultaneous milling machine, in excellent condition. Fully equipped! Suitable for connection to automation systems! Technical specifications: - Control unit: Heidenhain ITNC 530 - Travel (X, Y, Z axes): 500/450/400 mm - Travel (B, C axes): 161.955/360° - Clamping surface, rotary table: 500 x 380 mm - Rapid traverse: X - 80 m/min, Y - 50 m/min, Z - 50 m/min, B - 40 rpm, C - 50 rpm - Spindle speed: 20–18,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Network connectivity - Prepared for automation integration Accessories: - Internal coolant system with belt filter - Work area rinsing system - Heidenhain TS 649 probe - Coolant/air blast selection via M-code - Oil mist extraction unit - Rinsing pistol - Chip conveyor - Hand-held control unit Machine dimensions (L x W x H): 3800 x 3200 x 2800 mm Weight: approx. 6,500 kg Prsdsx Hwhropfx Ah Usf Inspection and test run under power at our facility is, of course, possible. We are also pleased to offer transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We are there for you! From machine purchase, transport, and installation, through to commissioning and subsequent maintenance or repair work, you can count on us.

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram Prjdpfjwp S Sqjx Ah Uef POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: used, Year of construction: 2008, Control system OKUMA OSP-P200M. Cooling threw spindle. otating axe A Tsudakoma 250. Accessories: chip conveyor, probe RENISHAW OMP40 and tool probe. Table 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle 50 - 8000 rpm DIN 40 Number of tools in tool changer 48 Machine dimensions 2805 x 2160 x 2746 mm Prjdpfx Ahswrnapj Uef Weight 7100 kg

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Psdpferfx Tnox Ah Uerf Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Prodpsinh Rqsfx Ah Uof Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: new, Center length ----- 1500 mm Center height ----- 280 mm Turning diameter ----- 560 mm Passage main spindle ----- 80 mm Bed width ----- 350 mm Spindle speed ----- 25-1600 rpm Motor ----- 7.5 KW INCLUDED * 3-axis digital readout brand SINO Prodpfx Ahjga Tvlo Ujf * Quick-change chisel holder type Multifix TOOC3 with 4 barrels * Electric brake * Foot brake * Self-centering 3-jaw chuck * Independent 4-jaw chuck * Clamping plate * Fixed and moving glasses * LED work light * Cooling system * Box with various tools