Automatic hacksaw

Kasto WBS 210/230

Condition: used, Hydr. hacksaw, metal saw, lifting saw KASTO type PSB WBS 210 / 230 Machine. No. 115 106 1212 / 72783 Year of construction 1986 sawing area - round Ø 250 mm sawing area - square 225 x 225 mm sawing range - rectangle 260 x 100 mm Cutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Godpfsifu Aysx Abvetw saw blade length 400 mm motor power 1,4 and 1,8 kW pole changeable mains connection 380 Volt, 50 Hz - only for 90° cuts, no miter adjustment - Saw motor with 2 speeds and 3 V-belt stages - Hydraulic saw bow feed - hydraulic cutting pressure adjustment via throttle valve - rapid motion for saw bow lowering - manual height adjustable material support table with mm scale via hand wheel - manual material clamping - coolant device in machine base - operating instructions space requirement L x W x H 1500 x 700 x 1550 mm weight 590 kg very good condition

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm Gtedsfg E Hlepfx Abvjw total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Gtsdpsxdwbkjfx Abvjw Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle Gtodpfx Abov Hwk Ujvjw !! Sold on behalf of the customer!!

Condition: good (used), Technical data: Working length: 2050 mm Gedjxruvzepfx Abvjtw Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: used, Year of construction: 2019, Equipment: compressed air brake, incl. front top link pin front drawbar front top link rear auto / hitch K80 1/4 diesel tank 1/2 Ad blue / Gtjdpfx Abjtdm Dysvsw

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Gtsdpfjv Ibkbox Abvew Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 tons

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Gtsdpfsga Tzxsx Abvjw Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Hydraulic bag cylinder Motor protection switch Automatic end stop

Condition: used, Pillar drilling machines Godpsb N Ezrsfx Abvetw

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm max. table load 700 kg spindle taper ISO BT-40 Gsdpfxexvdtwe Abvotw spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor