Klappverchluss

klappverschluss

Condition: good (used), Year of construction: 1994, Fastener Bedpoc Nw N Nsfx Al Ielg

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Bodpfx Aed Du T Ijl Ielg Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: used, Year of construction: 1999, Fastener in two forms with 16 professional Bljdpec Nw Rajfx Al Ieg

Condition: excellent (used), Boy 80M Year 1998 Closing 80 tons Scrow 36 mm Spray weighted 132 g spar distance 41x 35,8 Bedpfx Alsmt Hh Es Islg

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Bsdpfx Alsbnfxuj Ijlg Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Blsdpfowt Swzox Al Iog

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! Blsdpfx Ajud N Hdel Ijg As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2025, functionality: fully functional, The granulate mixer is available in 6 versions: Design can be stainless steel or painted steel: Technical specifications : MV 2 Bljdpfxsd R Atrs Al Isg The MV 2 for the complete mixing of all plastic granules, due to the forced guidance by screw sleeve. Tank capacity : 120 kg/ 200L L x W x : 700 mm x700mm x height: 1050mm/ 1250mm - screw, removable - Control for mixing times - suction device - 1 drain - Underframe mobile, castors 100 mm, all with locking brake.

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Cafe Container Model Imbiss, Office Container | Snack Bar Container | Sales Container | Cafe Container | Model IMBISS | 240cm x 600cm | High-Quality and Flexible Solution Available products can be viewed in our warehouse and picked up directly. Our office and residential containers offer an excellent solution for a wide range of applications. They are characterized by outstanding quality, maximum flexibility, and short delivery times. Technical Details Dimensions: • Width: 240 cm • Length: 600 cm • Height: 250 cm INTERIOR AND EXTERIOR WALLS • The walls are made of C- and U-shaped, seamless, galvanized steel profiles with a thickness of 1.5–2.0 mm. • Exterior cladding: 0.50 mm thick galvanized trapezoidal sheets, coated with a wood grain finish. • Interior cladding: Clad with 12.5 mm thick plasterboard. • Insulation: 50 mm thick rock wool. ROOF CONSTRUCTION • The structure consists of C- and U-shaped, seamless, galvanized steel frames with a material thickness of 1.5–2.0 mm. • Roof covering: 0.50 mm thick, galvanized trapezoidal sheets. • Insulation: 80 mm thick glass wool. •⁠ ⁠Optional: 100mm insulation with PUR, PIR, or rock wool available •⁠ ⁠Floor: 16mm fiber cement board + PVC covering High-quality workmanship for long-term use Features: •⁠ ⁠1 room •⁠ ⁠Plasterboard cladding on plastered wall •⁠ ⁠1 exterior door •⁠ ⁠2 windows with flaps •⁠ ⁠2 interior LED lights •⁠ ⁠2 interior power outlets Colors: •⁠ ⁠Facade color: RAL 7016 •⁠ ⁠Frame color: RAL 7016 •⁠ ⁠Customization: Custom design possible according to customer requirements Stock & Delivery: •⁠ ⁠In-stock items: Same-day shipping •⁠ ⁠Out-of-stock items: Production time 2 to 4 weeks depending on the model •⁠ ⁠Worldwide shipping: We offer professional shipping to all countries to ensure fast and reliable delivery. •⁠ ⁠Custom sizes: Products can be manufactured according to the customer's specific requirements. Blodswg E Nqepfx Al Isg Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or customization, please contact us!

Year of construction: 2025, condition: new, Standard version with column Motorised height adjustment 700 mm Articulated arm length 2x 1.100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5,5 kW including the following options: + speed control, spindle speed approx. 250 - 1.000 min-1 + pneumatic grinding pressure support + bellows cover for column and trapezoidal spindle + Incl. foundation screws and mounting template Bjdpfsgn Tzlsx Al Islg Grinding tools optionally available Request more information