Used Gf for sale (730)

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg Ffolhcdweb A Iyae Eeu

Condition: excellent (used), number of straightening rollers: 19, roller diameter: 30 mm, Straightening machine GF Georg Fischer - TRM 30/75 MACH-ID 9350 Make: GF Georg Fischer Type: TRM 30/75 Rolling width: 750mm Top Roll Ø: 30mm Bottom Roll Ø: 30mm Number of rolls:19 Rolling speed: 0-5 Length: 3800mm Ffjlhoycu Rzocdw Eou Width: 2300mm Height: 2409mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, GF AgieCharmilles Progress VP4 Year of manufacture: 2012 Travel paths: X = 800 mm, Y = 550 mm, Z = 525 mm Travel paths: U = 800 mm, V = 550 mm Maximum taper: 30° at 500 mm height Maximum workpiece dimensions: 1300 x 1000 x 510 mm Maximum workpiece weight: 3000 kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged-type wire EDM machine with automatic wire threading and re-threading after wire breakage Including automatic front door Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 2900 x 3050 x 2850 mm Net weight: 6000 kg The machine will be cleaned and fully overhauled after order confirmation. A 6-month warranty on all machine parts is included. Felhsyir N Ujcdw Esfu Commissioning and training can also be offered on request.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, overall weight: 2,270 kg, number of axes: 4, This 4-axis +GF+ AgieCharmilles FO 350SP die-sinking EDM machine was manufactured in 2013. It features a stable EDM generator, a fully operational 360° C-axis with a rotational speed of 100 rpm, and a substantial work area of 800 × 550 × 370 mm. Well-maintained and operational until its last day, consider the opportunity to buy this +GF+ AgieCharmilles FO 350SP die-sinking EDM machine. Contact us for more information about this machine. • Power supply: 3-phase, 380 V / 400 V • Power consumption: 6 kVA • Mains frequency: 50 / 60 Hz • Axes and travels: • C-axis travel: 360° • C-axis rotational speed: 100 rpm • Work area: Ffslhcdoyf In Sow Eeu • Overall work area: 800 × 550 × 370 mm • Working area size: 500 × 400 mm • Technical condition: • Fully operational; ran until last day of operation • Stable EDM generator with clean, repeatable pulses • Working area in good condition; guides without play • Operator panel, keyboard, and hand pendant function properly • Well maintained; not used in heavy production

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Ffslhcsyit Ulsdw Eeu

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table load: 1,500 kg, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis +GF+ Mikron Mill E 1200 was manufactured in 2021. It features a spindle speed of 20,000 rpm, HSK A63 tool magazine, and rapid traverses up to 40 m/min. The work table measures 1450 x 600 mm with a maximum load of 1500 kg. Additional features include a Lehmann 4-axis rotary table and a liftable chip conveyor. Consider the opportunity to buy this +GF+ Mikron Mill E 1200 vertical machining centre. Contact us for more information. • Tool magazine: DT30, HSK-A63 • Rapid traverse: X/Y 40 m/min; Z 35 m/min • Table size: 1450 x 600 mm • T-slots: 5 • Spindle cooling system – 20 kHz • Linear scales: MILL E 1200 linear scales • Machine status light Additional equipment Ffoleyb Sifshcdw Eou • Liftable chip conveyor • Chip trolley • Washdown system • Oil separator • Remote electronic handwheel • TS35.10 tool presetter (TNC 620) • IRP40.02 HSK63A measuring system • Lehmann 4-axis rotary table Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Fjlex Eh Iqehcdw Esfu Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, GF CUT 2000X Year of manufacture: 2016 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm U/V-axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Ffelhcsydk Skedw Eou Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm including Option KIT 50 Including automatic wire changer AWC Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D Including glass scales for X and Y axes VISION 5 control unit 15" LCD color screen, membrane keyboard and mouse Including Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. An individual test cut is possible upon request. We also offer on-site commissioning and training for this machine.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Ffolhcdjych Rzjw Eju Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering work tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be fully cleaned, overhauled, and thoroughly tested after receipt of order. We conduct laser measurement of the axes at our premises. On request, we are also happy to carry out a custom test on the CUT 3000 for you. Includes user training at Techma on your overhauled machine We are happy to optionally offer: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Condition: like new (used), Tool spindle Planer shaft Milling spindle spare parts for GF planer Ffslhcdeqxtglow Eeu

Condition: used, Year of construction: 2009, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC530, spindle speed (max.): 36,000 rpm, GF Mirkon XSM600U X: 800 Y: 600 Z: 500 A: +30/-100 degrees C: 360 degrees continuous HSK50 spindle: max. 36,000 rpm, 25 kW HR410 handwheel 60-station tool changer Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar internal coolant supply Blum laser tool measurement M&H 3D probe Pallet automation with 21 pallets - the pallets are not included in the scope of delivery Fjlhewa R A Nocdw Eofu This machine is offered on a customer order basis!

Year of construction: 2003, condition: used, Various blasting machines are for sale! Roller table blast machine Ffjls Hq S Dehcdw Eeu Trough belt shot blast machine Haengebahn blasting machine Rotary table blasting machine Blast cabinet Pressure blasting cabinet .

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2011 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V-axis travel paths: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the water tank) / 800 kg (without tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Felsx Sxa Tohcdw Eefu Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side only) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V Generator AGIEVISION 5 CNC control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and fully overhauled after receipt of your order. You will receive a 6-month warranty on all machine parts. Commissioning and training services are also available on request.

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 2" inch Fjlhcdeb A Iwcsw Ejfu -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Felhcdweb A Rzwj Eofu -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG Generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amps Surface finish up to Ra 0.08 µm AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Folhcdjx Sv E Hsw Eefu Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Pneumatic chuck of your choice (Erowa or 3R Systems) Includes 6-position electrode changer LTC Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg The machine will be cleaned, overhauled and extensively tested prior to sale to ensure the highest quality and reliability. We are also happy to offer you additional services: - Transport - Commissioning - Training - Accessories such as clamping devices

Condition: excellent (used), Year of construction: 2023, Electrode changer: X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): CNC Type: Worktank length: Worktank width: Worktank height: Table length: Table width: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight (kg): Max. machining current (A): Length x width x height: Weight (kg): Ffslhcdownfcgew Eeu Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: good (used), GF Milling machine with feed cast jaws Suva protection Ffslhcdsi Hgxxjw Eeu

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Felhoyazkcocdw Esfu

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Sielaff GF Robimat XM’ vending machine/beverage dispenser. Item for sale: 1 x Sielaff GF Robimat XM 35 with the following features: Sells glass bottles, PET bottles and cans from 0.2 l to 0.6 l For products from 200 to 910 grams and a diameter of 53 mm to 72 mm Max. bottle height: 240 mm 5 levels with sliders 7 selections per level Capacity: 35 varieties – approx. 315 bottles of 0.5 l or cans of 0.33 l Dimensions (W x D x H): 990 mm x 880 mm x 1830 mm Weight: approx. 330 kg Connection values: 230 V / 50 Hz / min. 10 A Power consumption: max. 750 watts Insulated glass pane VSG R-290 cooling Energy efficiency class D Modular design – particularly service-friendly and recyclable Coin compartment for payment Condition: This offer is for a used device, which may show signs of wear Foljxzql Dohcdw Ejfu (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, year of last overhaul: 2025, GF FORM 30 Revised Die-Sinking EDM Machine Year of manufacture: 2015 AC FORM HMI control system Travel paths (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1000 x 700 x 400 mm Max. workpiece weight: 1000 kg Integrated C-axis, rotation speed U = 0–100 rpm Manual tank level adjustment: 150–450 mm ISPG generator with 80 A Best surface finish: Ra 0.1 µm 6-position electrode changer in magazine Operation via 15" flat screen monitor with mouse Jogbox for manual operation Machine dimensions: 1600 x 2700 x 2858 mm Total weight: 4400 kg The machine will be cleaned, serviced, and tested in our facility after receipt of your order. Folhcdwjx Ifrhj Eofu We are pleased to offer you the following optional services: - Transport - Commissioning and operator training - Clamping devices - Dielectric fluid

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Year of manufacture: 2011 C-frame design, fixed table with drop tank Travel paths (X/Y/Z): 400 x 300 x 350 mm Distance table to quill: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa / 3R Systems) ISPG generator with 60 amperes Best achievable surface finish Ra 0.10 µm AGIEVISION 5 control interface 15” LCD color monitor, mouse or touchscreen, keypad, and manual control unit Including CAPA electrode changer - 40 electrode positions Net weight of the system: 3830 kg Machine dimensions: 1410 x 2460 x 2660 mm The machine will be cleaned, serviced, and tested by us upon receipt of order. Optional: Felhcdjx Eildsw Esfu - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: ready for operation (used), Year of construction: 2017, operating hours: 17,550 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 HSCI Main Drive Number of axis 3 Spindle Speed 42000 RPM Movement X-Axis Movement 600 mm Z-Axis Movement 360 mm Y-Axis Movement 450 mm Fslhjx Nr Rgscdw Eofu This 3-axis +GF+ MIKRON MILL S 500 was manufactured in 2017. It features a stroke of 600mm x 450mm x 360mm, spindle speed up to 42,000 rpm, and a worktable size of 590x450mm. It supports a maximum workpiece weight of 200kg. Ideal for detailed and precise machining tasks. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,154 mm, total length: 2,050 mm, total width: 2,234 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 800 mm, overall weight: 2,450 kg, warranty duration: 6 months, GF Machining Solutions CUT P350 Year of manufacture: 2020 AC CUT HMI-2 control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 800 x 550 x 220 mm Maximum workpiece weight: 750 kg Ffjlhcdjxywz Aew Eeu Cutting speed: 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.15 mm to 0.33 mm Overall system dimensions: 2050 x 2234 x 2154 mm Total system weight: 2450 kg The machine will be cleaned, completely overhauled, and tested for all functions by us after receipt of order. We are pleased to offer you commissioning of the machine as well as operator training on the control system.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 Year of manufacture: 2008 C-type design, fixed table with lowering tank Ffolhcexx Uqfodw Eeu Travels (X/Y/Z): 600 x 400 x 500 mm Distance table to ram: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 operating interface 15” color LCD monitor, mouse or touchscreen, membrane keyboard, and manual control Including CAPA electrode changer: - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm The machine has already been cleaned, serviced, and thoroughly tested. We would be pleased to invite you for an inspection and test erosion. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid