Bevel Gear Testing Machine

KLINGELNBERG PS 750

Condition: used, max. wheel diameter 0-200 mm Dedjtuxa Uepfx Apmskw max. module 25 min. module 0,5

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 68910, workpiece weight (max.): 5,100 kg, wheel width: 180 mm, grinding wheel diameter: 330 mm, helix angle: 45 °, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, type of input current: AC, wheel diameter: 10 mm, gear diameter: 330 mm, overall weight: 5,100 kg, total height: 2,300 mm, total length: 6,000 mm, total width: 4,500 mm, Wheel diameter - max. 10 - 330 mm Dedpfeykrmcox Apmskw Wheel width 180 mm Module - max. 7 Module - min. 0.5 Clamping length 420 mm Number of teeth 10 - 600 Helix angle - max. +/- 45° Speed 1100 - 1900 rpm Grinding wheel diameter 280 - 350 mm Grinding wheel width 84 - 104 mm Machine weight approx. 5.1 t Required space approx. 4.5 x 6.0 x 2.3 m Grinding oil filtration unit Reishauer AF

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Stroke: 1000mm Djdpfx Apjbrcmkomekw 3 Broaching-stations With chip-conveyor + platform and safety door

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Dksdoxtiunjpfx Apmew Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Dedpom E T Ansfx Apmjkw Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: used, Year of construction: 2014, Manufacturer Citizen Machinery Miyano Co., Ltd., Japan Model BNA 42DHY2 Year of Manufacture November 2014 Serial Number DK4Y1085 Control Fanuc Series 0i TD CNC Machine Type CNC Twin Spindle Turning Center with Y Axis Country of Manufacture Philippines Capacity Maximum Bar Capacity: 42 mm Maximum Turning Diameter: Approx. 42 mm Maximum Turning Length: Approx. 100 mm, depending on workholding Main Spindle: Built in spindle Sub Spindle: Yes Y Axis: Yes C Axis: Dkodpfjzmh R Uex Apmjw Main and Sub Spindle Turret: 12 station live tooling turret Live Tooling: Yes Travels X Axis: Approx. 135 mm Z Axis: Approx. 320 mm Y Axis: Approx. ±40 mm Spindle Main Spindle Speed: Up to approximately 6,000 rpm Sub Spindle Speed: Up to approximately 6,000 rpm Spindle Nose: 42 mm bar capacity Rapid Traverse X Axis: Approx. 24 m/min Z Axis: Approx. 30 m/min Y Axis: Approx. 12 m/min Electrical Power Supply: AC 200 V Phase: 3 Phase Frequency: 50 / 60 Hz Rated Power: 30 kVA Full Load Current: 87 A Short Circuit Interrupt Rating: 2.5 kA Machine Weight Weight: 3,100 kg Equipment Visible on This Machine Fanuc Series 0i TD CNC Control Twin Spindle Y Axis C Axis Live Tooling Hydraulic Chuck Coolant System Fully Enclosed Splash Guard Emergency Stop Electronic Handwheel

Condition: good (used), Year of construction: 2013, functionality: fully functional, 5-axis CNC grinding machine - Solution Line control system - Direct drive on all linear axes - Direct drive in all rotary axes - Direct path measuring systems in the X, Y, and Z axes - Automatic 5-position grinding wheel changer with its own NC drive for grinding wheels and coolant distributor, with collision monitoring - Central lubrication Dkedezcch Iopfx Apmow Further details available upon request.

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Dedpfx Apewwkacsmjkw Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: used, Year of construction: 1972, Max. pulling force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Throat depth: 470 mm Distance between die positions: 125 mm Table: 400 x 400 mm Dksdpfocdtnhjx Apmsw Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Dksdpfozaunzsx Apmsw Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine approx.LxWxH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device *