Motorized three-roll plate bending machine

KRAMER RVe65-1000 x 1,5

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 Hjledzqaashccqtsfi working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: good (used), Year of construction: 1970, machine/vehicle number: 30740, Offer 23465 Technical data: - max. working width 1040 mm - max. material thickness (at 40 kg strength) 3.5 mm - Table width 300 mm Hfolhcjrci T Eecqtoi - stand projection 100 mm - working height 880 mm - Front angle stop - 3 additional front support arms - Back fence manually adjustable 5 - 550 mm - Drive 400 V / 5.5 kW - E. foot switch - Space requirement including back gauge, without front support arms - approx. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Condition: good (used), Functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Hslheww I Tmsccqtsfi

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail Hfslhjfnabysccqtoi - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: used, power: 35 kW (47.59 HP), Year of construction: 2023, Speed: 20 / _____ / Technical data: / Bucket capacity (standard bucket) 0.65 / m³ / Operating weight 3,200 - 4,300 kg / Tipping load (standard bucket) 2,340 kg / Tipping load (pallet fork) 2,187 kg / Payload (S=1.25) 1,750 kg / Lifting capacity (m Hfsleqrqc Nohccqtji

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm Hjlsvaatfohccqtjfi for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Back stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Machine dimensions L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Front safety cord, electrically secured • 1 side stop on the right • 1 support arm Hfolhccsfpa Ihjqtoi • Geared brake motor • The working height is currently 905 mm. This can be lowered by 150 mm to 755 mm, as the machine's feet have been raised. • Manual central oil lubrication • Electric foot switch We have rotated the two knives to a new cutting edge and readjusted them. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1985, Condition: good (used), machine/vehicle number: xxxx, Technical data: - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm Hfelhjf S Tg Tjccqtji - max. adjustability bending beam 20 mm - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable - space requirement approx. W 1500 x H 1400 x D 750 mm - weight approx. 400 kg

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bending Machine Hfjlhovaar Ioccqtsi - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm