Gear hobbing machine

LIEBHERR LC 80

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Kdodpfxsvca Ize Apdsl Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, Kedsrzq Arspfx Apdjdl 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: new, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 1,500 rpm, turning diameter over cross slide: 1,000 mm, total length: 2,510 mm, total height: 3,546 mm, total width: 4,155 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning height: 825 mm, mount diameter: 1,000 mm, workpiece diameter (max.): 1,100 mm, overall weight: 16,000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Axes: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X axis travel: 500+40 mm - Z axis travel: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 Kdodoyxg N Aspfx Apdsl - Maximum workpiece weight (including chuck): 1250 kg Turret: - Number of positions: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X / Z: 20 / 20 m/min - X axis ballscrew: diameter 50 x 8 mm - Z axis ballscrew: diameter 50 x 8 mm Motors: - Spindle motor: 37-45 kW - Motorized tool motor: 7 kW - X and Z axis servomotors: 4-7 kW General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16,000 kg INCLUDED ACCESSORIES: - Fanuc 0i-TF Plus numerical control (15''), Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, Ethernet, and USB ports - Belt-driven spindle, 1500 rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Supplied without chuck - Servo-assisted BMT turret, 12 positions, prepared for motorized tools - Chip conveyor - High-pressure pump 15 BAR - 3-color alarm and cycle-end lamp - Integrated work light - Leveling feet - Tool box with service keys - Air blow system through the spindle - Upgraded turret motorized tool motor – from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm) - Dual pressure release - Renishaw M.T.P. manual presetting - Oil skimmer - Static toolholder kit - Fume extractor predisposition - Black color NEW MACHINE IN STOCK FOR IMMEDIATE DELIVERY

Condition: like new (used), Year of construction: 2024, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 800 mm, turning diameter: 850 mm, spindle speed (max.): 1,760 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 465 mm, travel distance Z-axis: 800 mm, spindle motor power: 45 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 3,845 mm, total length: 3,450 mm, total width: 2,000 mm, torque: 2,577 Nm, overall weight: 9,500 kg, chuck outer diameter: 610 mm, spindle nose: A2-15, Equipment: documentation/manual, rotational speed infinitely variable, HYUNDAI WIA LV8500R – Unused since commissioning! The machine was newly delivered and installed in October 2024. After installation, a geometry measurement cut was performed. The workpiece used for this still remains on the machine, which has otherwise not been used to this day! Kdsdjyw Sr Tepfx Apdol Machine equipment: - HYUNDAI WIA LV8500R – FANUC 0iPLUS with 15" touchscreen and FANUC SmartGuide i user interface including FANUC ManualGuide i - Tool breakage monitoring on all machine axes - Automatic work area door to allow for automation - Hinged belt chip conveyor - Reinforced drive power with 2-speed gearbox (45/37 kW – 2,577 Nm) - 24-inch (610 mm) 3-jaw power chuck with clamping jaws - RENISHAW automatic tool measurement - BMT-75 tool turret - 12 tool holders for fixed tools - LPS sensor for automatic adjustment of the clamping range - 20 bar coolant pressure - Coolant spray gun for the work area - Compressed air gun for part cleaning - Bed flushing to prevent chip nests - Air conditioning for the control cabinet

Condition: used, Year of construction: 2010, Mazak INTEGREX 300-IV – Technical Data Year of manufacture: 10/2010 Model according to nameplate: INTEGREX 300-IV Serial number / Ass. No.: 221788 Power on time: approx. 50 000 hours General Machine Data Machine type: Turn-mill center Control: Mazatrol Matrix Chuck: Kitagawa B-212 (12”) Max. turning diameter: approx. 762 mm Max. machining length: approx. 1524 mm Bar capacity: approx. 76 mm Main spindle speed: 4,000 rpm Second spindle speed: 4,000 rpm Milling spindle speed: up to 12,000 rpm Tool magazine: 40 stations C-axis: 0.001° B-axis: 0.001° indexing X-axis travel: approx. 630 mm Y-axis travel: approx. 230 mm Z-axis travel: approx. 1585 mm Main power supply: 3 AC, 400 V, 50/60 Hz Ksdpfx Apjyxm S Rjdsdl Control circuit: AC 100 V / DC 24 V Max. current: 80 A

Condition: good (used), Description: The machine is in good technical condition, with the possibility of testing by prior arrangement. Maximum turning diameter: 660 mm Maximum swung diameter: 660 mm Main spindle: - Speed range: 35–5,000 rpm - Main drive power: 22/15 kW - Maximum torque: 349 Nm - Spindle bore: 76 mm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Sub spindle: - Speed range: 35–5,000 rpm - Power (10 min/continuous): 18.5/15 kW - Maximum torque: 326 Nm - Chuck diameter: 210 mm - Indexing (C axis): 0.0001° Coolant tank capacity: 300 l Machine power supply: 66 kVA Operating voltage: 400 V / 50 Hz Air pressure: 5 bar, 500 l/min Control system: MAZATROL Fusion 640 MT Flush cooling: - Pump capacity: 20 l/min - Pump pressure: 5 bar Accessories: - Technical documentation - Chip conveyor with coolant - Tool magazine for 20 tools - B axis (positioned at 0.001° increments) - C and Y axes Ksdpjy Amqzefx Apdsdl - Sub spindle angular position indexing - Synchronization of main and sub spindle - Tool presetting system (Tool Eye) - Front door locking - 20-position tool magazine - Complete cooling system - Interface for IC memory card

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Kdedpek It Utefx Apdel

Condition: used, Year of construction: 2001, Palet size 600 x 600 mm X/Y/Z - 1050/800/880 mm Spindle speeds 7000 rpm Spindle taper ISO 50 Tool changer w/80 stations Control: Mazatrol PC-Fusion 640 M Kdedpfx Apsyhzcrsdol Equipped with: 2 extra pallets 600 x 600 mm

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Kdsdpfx Ajxdfazepdsl Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: good (used), TECHNICAL INFORMATION: Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Kdsdporpnf Refx Apdel Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual plongeé Main engine power: 20 Kw Voltage: 380 V Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: 4315Kg approx. machine + 60 Kg drawer