Vertical band saw

MÖSSNER SSF 501

Condition: used, Year of construction: 1982, Technical details: dimensions of saw-band: 3920 - 4050 mm Nwjdjyzpknspfx Anfef throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Cutting height: 400 mm band speed: 15 - 940 m/min Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine xH: 1,3 x 1,3 x 2,2 m

Condition: new, TECHNICAL DATA Nodpfx Anog Dgymsfswf type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Condition: good (used), Year of construction: 1983, dimensions of the machine ca. 1210 x 1000 x 2070 mmxmmxmm weight - pallet system 1000 kg table-size 800 x 820 mm MÖSSNER SSF/501 Vertical Band Saw Table size: 800 × 820 mm Nsdpfx Anoyxhg Aofewf Table travel: approx. 350 mm Cutting height under guide: approx. 400 mm Cutting width / reach: approx. 500 mm

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm Nedpjwgi R Sefx Anfjwf table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Njdsd N Rb Dspfx Anfjwf Very good condition. Available immediately.

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm Nwjdpfx Aeb N Eh Hjnfof table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Nwjdpfx Ansxnlgcofef Storage location: Garbsen

Condition: reconditioned (used), Year of construction: 2005, URBAN Corner Cleaning Machine Type: SV430; Year 2005 Used, in very good condition, technically overhauled Top machining tools: - Drilling and milling tool - Smooth surface scraper - V-groove surface scraper - Inside corner knife Nwsdpeyl Hu Dofx Anfof Bottom machining tools: - Drilling and milling tool - Smooth surface scraper - V-groove surface scraper - Inside corner knife

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Maximum temperature: 250°C - Internal dimensions (W x D x H): 2100 x 2100 x 2000 mm - Volume: 8,820 liters - Control: Eurotherm Nanodac Nwjdpfxjv Hg Euj Anfof Controller/recorder with color touchscreen display - 2 pcs. recirculation fans - Double doors with safety door sensors - Overtemperature protection: Eurotherm 3216i - 2 pcs. fresh air fans - Automatic dampers - Electrical design: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Temperature accuracy: +/- 6 K in an empty oven - Documentation, CE certificate of conformity - Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but fitted with stainless steel sheet. This allows unrestricted entry for all track widths. Alternatively, an insulated floor can be offered (with customer-defined entry rails). We offer new and used industrial furnaces, which we can also retrofit and upgrade according to customer requirements. Furnace, ovens, drying oven, industrial oven, drying cabinet, heat oven, heat cabinet, recirculating oven, chamber furnace, heating oven, chamber recirculation oven, tempering oven, annealing oven, temper oven, annealing oven.

Condition: ready for operation (used), Year of construction: 2006, Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible. Nwjdpfx Ajukhz Ienfsf