Conveyor belt

Edelstahl

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm Dodpfor I S H Eex Abusun * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Duodoxygblopfx Abuon Speed: 745 rpm Volume flow: 3455 dm³/min Motor power: 22 kW

Year of construction: 1998, condition: excellent (used), NEUE HERBOLD cutting mill / granulator Universal mill - heavy version Made in stainless steel -Year of construction 1998 - made of stainless steel - from technical center (machine was used exclusively for test/demonstration purposes - Rotor diameter: 300 mm Dedpfxoh Rwc Es Abusun - Working width: 500 mm - 3 rows of knives

Condition: used, mileage: 1 km, first registration: 07/2011, color: orange, * Schmidt Salzstreuer auf Abrollsystem Behälter aus Edelstahl * S 80-42 VCLN -660 * 8 cbm Inhalt * 3000 L Feuchtsalz * 1614 kg * 10000 kg GG * Bedienpult Duedsxx D Tcepfx Abuon * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Year of construction: 2008, condition: ready for operation (used), 1) Reciprocating compressor Prematic PAKO 1201/270, year of manufacture: 2008, displacement: 1200L/min, flow rate: 925L/min, tank volume: 270L, speed: 700rpm, power: 7.5kW, operating pressure: 10bar, operating hours: approx. 5257h. 2) Screw compressor Atlas Copco GA7FF, year of manufacture: 1999, operating pressure: 8bar, flow rate: 1092L/min, power: 7.5kW, speed: 3000rpm, weight: approx. 250kg, operating hours: 14057h. Documentation available. An on-site inspection is possible. Dujdpfxjxf Iins Abusn

Condition: new, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,200 mm, loading space volume: 30 m³, Equipment: ABS, Delivery time: available at short notice Weight from 5,960 kg Kässbohrer K.STN L 30 Slurry Tanker # Stainless Steel V2A Tanker Semi-Trailer 30m³ with 3 Baffle Plates # 1 x Filling Dome/Manhole DN 500 # Aluminum box frame # Wabco electronic braking system with EBS # BPW axles with disc brakes # Branded tires, 6 x 385/65 R 22.5 on aluminum rims # Self-steering trailing axle or Wabco Optiturn # 1st axle is a lift axle # Side underrun protection # Plastic toolbox in front of the first axle, right side # Tank pressure test and approval # Access ladder, platform, and safety railing according to UVV regulations # 2x wheel chocks with holders Dodpfsxynwuex Abujun Equipment/Technology: # 1x Börger FL 1036 pump with aluminum housing or 1x Vogelsang VX 186-260 Q Light GL pump # 1 filling dome DN 500 # All slide gates with pneumatic piston rod actuation # Front fill level display with automatic shut-off # Rear fill level indicator in 6" plexiglass # 8" suction connection rear top, with sump and rubber funnel # Complete stainless steel pipework in 8"/6"/4" # 4" overflow pipe at top with flange starting point and ending at the lower side near the support structure with flange # 4" flushing line rear, starting with 6" square flange, welded directly into end plate, front at end plate with 180° bend # All controls housed in stainless steel cabinet, rear left or right # Overpressure and vacuum relief valves # 6 LED work lights # Including all hydraulic lines and hoses to tractor unit ---- Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Year of construction: 2021, condition: good (used), Offered is a stainless steel hand wash basin with sensor, measuring 400 x 310 x 240 mm, 220V. Entirely made of V2A. In very good condition. Year of manufacture: 2021. Further details upon request! Payment in cash or in advance. Sale only to commercial customers, no warranty or guarantee. Dodpfsya Imwjx Abuoun

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Dusdpfxjx Uwtdo Abuen Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Offered is a stainless steel hand wash basin with sensor, 470 x 410 x 240 mm, 220V. Fully made of V2A (AISI 304) stainless steel. In very good condition. Year of manufacture: 2012 Further information available on request! Payment by cash or advance payment. Duodsya Imdepfx Abuen Sale to commercial customers only. No guarantee, no warranty.

Condition: good (used), Screws, washers, stainless steel screws, VA screws, wood screws, hanger bolts, solar fasteners -Manufacturer: Würth, hanger bolt M10 x 180 50 pieces/box -Type: SW 7 -Material: stainless steel A2-70 -Quantity: 21x box available -Price: per box Duedpfx Absipap Hjujn -Carton dimensions: 200/90/H85 mm -Weight: 3.9 kg/carton

Condition: used, Top cooler, top cooler, refrigerated counter, air cooler, evaporator, cold store, refrigerated container, cold room Dusdob Uhnmopfx Abusn -Incl. Fan -Number: 2x top cooler available -Price per piece -Dimensions: 610/1500/H220 mm -Weight: 48 kg

Condition: good (used), Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder for: Pallet stacker, make: OMG, type 214EA -Cylinder made of: stainless steel -Piston: Ø approx. mm -Piston rod: Ø 45 mm -Stroke: 110 mm Duedpfx Abod Al Hyjusn -Dimensions: 120/160/H310 mm -Weight: 8.4 kg

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers Dujdpfexyf N Iex Abusn -Conveyor belt rollers: Transport rollers, diameter 40 mm -Transport width: 250 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 3.2 kg/pc.