Steel potato grinder

Condition: used, Year of construction: 2019, TECHNICAL DETAILS General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Todpfx Ae Aayk Robued Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Tsdpfexfvh Sox Abusd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, TECHNICAL DETAILS General Information Type of machine: Electric forklift, 3-wheel Manufacturer: Linde Model: E 15 Z-02 Year of manufacture: 2006 Operating hours: 3,530 h Condition: ready for operation Own weight: 3,097 kg Lifting Performance Load capacity: 1,500 kg Lifting height: 3,750 mm Mast: Standard (2W375) Fork carriage: FEM 2A Fork length: 1,100 mm Drive and Battery Drive: Electric, 24 V Battery voltage: 24 V Battery capacity: 805 Ah Battery year of manufacture: 2022 Battery charger: single-phase, 24 V, 50 A, not tested Tires Front tire: Superelastic, black, 18 × 7–8 Rear tire: Superelastic, black, 15 × 4.5–8 Front tire condition: 60 % Rear tire condition: 0 % Dimensions Overall length: 1,850 mm Overall width: 1,050 mm Overall height: 2,300 mm Structural height: 2,300 mm Sales Information Todpfsz Scr Dex Abujd Minimum price: none Sale: guaranteed to the highest bidder EQUIPMENT Side shifter 3rd valve Work light, front Roof protection Windshield Impulse control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, TECHNICAL DETAILS General Information Year of manufacture: 2021 Operating hours: 3,269 h Condition: ready for operation Own weight: 4,113 kg Lifting Data Tsdez Scqaspfx Abued Load capacity: 2,500 kg Lifting height: 3,670 mm Mast: Standard, 2W367 Fork carrier: FEM 2A Fork length: 1,200 mm Drive and Engine Drive: 4-cylinder diesel engine Fuel: Liquefied petroleum gas (LPG) Engine manufacturer: Doosan Engine model: PM02V Tires Front tires: Superelastic 23 × 9–10, 80% Rear tires: Superelastic 21 × 8–9, 50% Dimensions Overall length: 2,650 mm Overall width: 1,200 mm Overall height: 2,480 mm Height: 2,480 mm

Condition: excellent (used), We offer the FAM CHD-3D dicing machine, a versatile machine for dicing, slicing, and cutting a wide range of products: meat, cold cuts, cheese, vegetables, fruit, and vegetarian products. The device is ideal for food processing plants, in the production of ready meals, salads, frozen foods, and vegetable-meat mixtures, ensuring even cubes and high cutting repeatability with high line efficiency. Intuitive operation facilitates quick parameter setting and cutting set replacement. Technical data: Manufacturer: FAM Model/type: CHD-3D Dimensions (L x W x H): 2000 x 1400 x 1600 mm Power supply: 380 V, 50 Hz, 3N Power: 7.5 kW Country of manufacture: Belgium There are 2 such models available. The FAM CHD-3D dicer is a reliable solution for companies that want to increase cutting efficiency and improve the quality and repeatability of products in professional food processing. Todpfx Ajycc Izjbujd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 5,125 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 900 mm, fork length: 1,200 mm, TECHNICAL DETAILS Mast Lifting capacity: 5,000 kg Lifting height: 4,000 mm Free lift: 900 mm Overall height: 3,340 mm Fork carriage: FEM 4 Fork length: 1,200 mm MACHINE DETAILS Mast: Standard (2S400) Drive: 4-cylinder diesel engine Fuel type: Diesel Engine manufacturer: Perkins Tires: Pneumatic tires Front tires: 8.25-15 Rear tires: 8.25-15 Front tire condition: 60% Rear tire condition: 60% Tsdoz Sb I Rspfx Abued Dimensions & Weight Dimensions (L x W x H): 4,450 x 2,000 x 3,340 mm Total weight: 8,150 kg Operating hours: 5,125 h EQUIPMENT Full cabin Heater

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 145 h, load capacity: 2,000 kg, lifting height: 3,805 mm, fork length: 1,000 mm, empty load weight: 3,589 kg, TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,805 mm Overall height: 2,460 mm Fork carriage: FEM 2A Fork length: 1,000 mm MACHINE DETAILS Mast: Standard (2W380) Drive type: Electric Dimensions & Weight Dimensions (L x W x H): 2,150 x 1,100 x 2,460 mm Total weight: 3,589 kg Battery voltage: 48 V Battery capacity: 690 Ah Battery year of manufacture: 2006 Charger: Three-phase, 48 V, 80 A (not tested) Front tires: Superelastic, 200/50-10 Rear tires: Superelastic, 18 × 7-8 Tedpfx Aboz Sbrisuod Front tire condition: 70% Rear tire condition: 70% Operating hours: 145 h EQUIPMENT 3rd valve Impulse control Side shifter

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Poly-Clip FCA 100 – Automatic Double Clipper Brand: Poly-Clip Model: FCA 100 Tsdpsxyrg Tefx Abued Year of manufacture: 2019 Dimensions: 1500–1620 mm (width), 1135 mm (depth), 1985–2130 mm (height) Weight: 550 kg 26,000 cycles After complete overhaul For caliber range 24–90 mm, with speeds up to 186 cycles per minute in continuous operation The Poly-Clip FCA 100 is an advanced industrial machine designed for clipping. It features a robust construction and high performance, making it ideal for use in the food industry and other sectors requiring precision. The machine ensures fast and efficient clipping. The device is equipped with a modern control panel, allowing for easy operation and process monitoring. Additionally, the FCA 100 offers adjustable operating parameters, making it extremely versatile and efficient.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 10,555 h, load capacity: 3,000 kg, lifting height: 3,300 mm, construction height: 2,270 mm, overall weight: 5,507 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,300 mm Overall height: 2,270 mm Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 500 Ah (Li-Ion, year of manufacture: 2021) Charger: 80 V - Li-Ion Tjdpfxoz Sbg He Abued Weight: 5,507 kg Operating hours: 10,555 h EQUIPMENT 3rd valve 4th valve Rear work light Front work light Heater Full cabin Side shifter

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Todpfxsz R Dz Aj Abusd Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: excellent (used), functionality: fully functional, Kiremko, Agrico Potato Peeling Line Comprises: - Kiremko Steam Peeler: With feed hopper: approx. 2400 x 3000 x 6000 mm Equipped with feed screw conveyor: length approx. 6000 mm - Agrico Two-Way Peeler: Tjdpfx Aeyku Hrebued Equipped with screw conveyor - Double-Brush Machine (Type AT-OBC-2500): Working length: 2500 mm Equipped with screw conveyor - Discharge system and filtration: Discharge screw conveyor: length 2500 mm Collection tray / filtration unit with pump: approx. 1550 x 1070 x 1160 mm Platforms are not included A complete, industrial-grade potato peeling line constructed entirely from stainless steel, designed for high-capacity processing. The system utilizes state-of-the-art Kiremko steam peeling technology, which, when combined with the two-way Agrico peeler and brush machine, ensures maximum raw material cleanliness with minimal product loss. An extensive system of screw conveyors guarantees fully automated material flow between processing stages. The line is equipped with its own filtration and water recovery system featuring a high-performance pump, enabling operational cost optimization.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 28,000 h, controller model: Siemens Sinumerik 840 D SL, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, working length: 4,000 mm, working width: 2,000 mm, The machine will be powered until Wednesday, November 4th, and will then be dismantled. TECHNICAL DETAILS Resonator power: 5 kW Working area (L x W): 4,000 x 2,000 mm Sheet thickness, steel: max. 25 mm Sheet thickness, stainless steel: max. 20 mm Sheet thickness, aluminum: max. 20 mm Speed: max. 235 m/min Accuracy: 0.001 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D SL Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine weight: 13,000 kg Operating hours: 28,000 h EQUIPMENT LiftMaster Power supply for TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning TRUMPF laser Solid-state laser TruDisk 5001 with one LLK output Teds Agvnkepfx Abujd Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Cutting head Universal cutting unit with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection 17-inch touch color screen Simple workshop programming Advanced workshop programming Fast reproduction Integrated technology data Automatic shutdown FastLine FlyLine AdjustLine Remote service via internet USB interface RJ-45 network connection CE marking Light barriers Multi-camera base system Compact dust extraction system Machine cladding with certified viewing window, door on the right Electric roll-up roof Retrofit capability for max. 2 additional LLK outputs

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Submitting a bid obligates the bidder to collect the equipment on time, no later than week 46. TECHNICAL DETAILS Machining Area Cross-section: 20 × 60 to 300 × 450 mm Material Feed Infeed cross conveyor: 7 strands Conveyor length: 2.2 m Saw Unit Saw: Undercutting swiveling miter saw Milling Units Milling unit: Universal milling machine Tools for universal milling machine: Roller cutters and finger cutters Vertical Combination Support Drilling units: 1 unit Finger cutter: 1 unit Horizontal Combination Support Drilling units: 2 units Grooving tool: 1 unit Workpiece Handling Beam turning station: fully automatic Foundation and Installation Minimum floor slab thickness: 10 cm Floor slab requirements: level, sufficiently reinforced, and suitable for anchoring Electrical Data Voltage: 400/230 V, 3/N/PE Fuse rating: 3 × 63 A Frequency: 50 Hz Peak demand: 15 kW Compressed Air Supply Volume flow: max. 600 l/min Operating pressure: 8.5 bar Permissible pressure: max. 10 bar Control System Todpfo Aayqwex Abuod Retrofitting: Fall 2020 by Hundegger Control system: CAN bus control Previous control system: MIPPS EQUIPMENT Infeed cross conveyor with 7 strands Undercutting swiveling miter saw Universal milling machine Roller cutters Finger cutters Combination support for vertically operating tools Drilling unit, vertical Finger cutter, vertical Combination support for horizontally operating tools 1 drilling unit, horizontal Grooving tool, horizontal Fully automatic beam turning station

Condition: good (used), For 1 cart Max. temperature 400ºC Gas operation. FLAXMER burner Cart dimensions: 600 x 800 mm. Height 1800 mm (15 trays) Tedpfx Abowcfqaouod Included 3 carts

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 12 mm, overall weight: 8,000 kg, working length: 3,000 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Max. sheet thickness, steel: 12 mm Tensile strength, steel: 450 N/mm² Working length: 3,000 mm Max. feed rate: 88 mm/s Performance data Power: 22 kW Tool weight: 31.5 kg MACHINE DETAILS Power: 22 kW Input voltage: 380 V Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,600 x 2,100 mm Total weight: 8,000 kg Tjdpfx Asz Nnvbobujd External Reference: Zafa - Lot 12