Synthetic cork production line

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 100281518, total height: 2,260 mm, total width: 1,550 mm, total length: 1,685 mm, product height (max.): 310 mm, product width (max.): 150 mm, No reserve price – guaranteed sale to the highest bidder! The original price was over 100,000 EUR! The device is ready for loading & packed for transport! Loading can be handled by the seller. TECHNICAL DETAILS Maximum inspection width: 150 mm Maximum inspection height: 310 mm CONVEYOR SYSTEM Conveyor type: Turn table Speed: 12 – 45 m/min MACHINE DETAILS X-ray Generator Voltage: 30 – 75 kV Current: 1 – 8 mA Power: max. 300 W Dimensions (L x W x H): 1,685 x 1,550 x 2,260 mm Protection class: IP65 / IP66 Electrical data Bedpfxoy Ath Hs Al Ijlg Power supply: 200 – 240 V Frequency: 50 / 60 Hz EQUIPMENT Rotary table conveyor Hermetic air cooling X-ray inspection system

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding Bjdpfx Aoycuuysl Iolg • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 110532, turning length: 1,980 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, turning diameter over bed slide: 600 mm, controller model: Siemens 840DSL mit ShopTurn, TECHNICAL DETAILS Swing diameter over bed: 600 mm Distance between centers: 2,000 mm Turning length: 1,980 mm Spindle bore: 105 mm Speed: 2,500 rpm Power: 18.5 kW Bledpfx Ajy Ex Hmol Iog MACHINE DETAILS Control: Siemens 840DSL with ShopTurn Number of gear stages: 2

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 760 mm, cutting range round steel at 90°: 400 mm, saw band length: 5,920 mm, working height: 720 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: infinitely adjustable (1:7) Blsdpfxjy Ex E Ns Al Iog Working range (round): max. 400 mm Working range (square): 400 x 370 mm Cut length (single stroke): 10 - 760 mm Cut length (multiple stroke): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Min. finished part length: 10 mm (35 mm vertical) Note: Disassembly and loading can be offered by the seller at an additional cost. The roller conveyor is not included in the offer.

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Blodpew Tbr Hjfx Al Ijg Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, The machine's control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for blanks with tensile strength 400 N/mm² max.: 3.5 mm Minimum sheet thickness: 0.5 mm Punch head force max.: 40 presses with max. force 7 t & 4 presses with max. force 26 t Lower cylinder force max.: 6 t Double punch force: 12 t (2 hydraulic punches) Minimum input table length: 370 mm Maximum input table length: 3,048 mm Minimum input table width: 300 mm Maximum input table width: 1,524 mm Maximum input table diagonal: 3,408 mm Minimum output table length: 250 mm Blodpfxsy Emr Dj Al Ieg Maximum output table length: 3,048 mm Minimum output table width: 60 mm Maximum output table width: 1,524 mm Vertical stroke of scissor lift table: 550 mm Usable load capacity of scissor lift table: 5,000 kg Minimum size of transportable sheet stacks: 300 x 100 mm MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller conveyor PRL3814F Universal destacking device DUF15 Punch head H2 Hydraulic power unit C1515 (3-unit pump system) Lower cylinder EI09 Double rotary punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 MHz WINDOWS NT Documentation

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, With digital position display! TECHNICAL DETAILS Bjdpjy Emq Tjfx Al Iolg X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18–1,800 rpm Spindle taper: SK-40 Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg EQUIPMENT All accessories shown in the photos, including tools, tool cabinets, and clamping devices

Year of construction: 1974, condition: ready for operation (used), A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible. Bsdpfx Ajwmqw Tsl Ielg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 7001203, turning diameter over cross slide: 438 mm, spindle bore: 152 mm, turning diameter over bed slide: 860 mm, center width: 2,300 mm, spindle speed (max.): 680 rpm, bed width: 510 mm, TECHNICAL DETAILS Centre distance: 2,300 mm Swing diameter over bed: 860 mm Swing diameter over cross slide: 438 mm Bed width: 510 mm Spindle mounting: A2-11 Spindle bore: 152 mm Spindle speed range: 8 - 680 rpm Number of speeds: 12 Bodjy Edw Repfx Al Iolg Tailstock quill diameter: 120 mm Tailstock quill travel: 165 mm Quill taper: MT6 MACHINE DETAILS Motor power: 22 kW

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turn-mill spindle Full indexing specifications: Yes X-axis travel: 380 mm Y-axis travel: ±105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ±120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Bsdpfoy Edc Hsx Al Islg Magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: Ø70/Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower Turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool stations: 10 Tool rotational speed: 6,000 min⁻¹ Driven tool power: 1.5/1.2 kW Main Spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Sub Spindle Spindle speed: 1,000 rpm BW axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang to conveyor, if equipped) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated output: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Powered on: 54,061 hours Spindle 1 operating hours: 9,813 hours Spindle 2 operating hours: 5,002 hours EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blower outside the spindle Foot switch (double) for main and sub spindle

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. Blsdpfoyg Eghox Al Iog The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 19,229 h, functionality: fully functional, machine/vehicle number: 8043943123C, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Turning diameter: 465 mm Bodpfey D I Ttox Al Ielg Turning length: 1,050 mm Swing diameter: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Spindle speed range: 3,500 rpm Rapid traverse X/Z: 30 m/min MACHINE DETAILS Control: Siemens 840 D Number of tool positions: 12 positions Tool holder: VDI 40 Weight: 7,500 kg Operating hours Spindle hours: 19,229 h Power-on hours: 81,347 h Note: The machine can be inspected under power upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, laser power: 4,000 W, sheet thickness steel (max.): 22 mm, sheet thickness aluminum (max.): 9 mm, travel distance X-axis: 3,420 mm, travel distance Y-axis: 1,550 mm, CO2 laser cutting machine with pallet changer, loading/unloading system, and sheet metal storage TECHNICAL DETAILS X travel: 3,420 mm Y travel: 1,550 mm Z travel: 200 mm Working area: 3,070 x 1,550 x 200 mm Laser power: 4,000 W Cutting thickness steel / stainless / aluminum: 22 / 12 / 9 mm Bedjy D Izqepfx Al Iolg Table load: 920 kg Traverse speed X/Y/Z: 80 / 80 / 60 m/min MACHINE DETAILS Control unit: Fanuc 160 iLB Machine weight: 15,500 kg EQUIPMENT Double storage tower LKI UL300FO TWIN, year of manufacture 2004 Extraction and filter unit Torit Chiller unit MTA 201

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Blodpfjyx Dxuox Al Ijg Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 15,000 h, controller model: BySOFT, laser power: 2,200 W, travel distance X-axis: 1,562 mm, travel distance Y-axis: 772 mm, travel distance Z-axis: 100 mm, TECHNICAL DETAILS X-axis travel: 1,562 mm Y-axis travel: 772 mm Z-axis travel: 100 mm Material thickness (iron): 15 mm Rapid traverse X-Y-Z: 100 - 100 m/min Working area: 1,500 x 3,000 mm Bodpjy D Iklsfx Al Islg MACHINE DETAILS Control unit: BySOFT Laser source: Bylaser 2200 Laser power: 2,200 W Weight: 13,500 kg Operating hours: 15,000 h