Roll forming line

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Lodpfxoz I Tt Is Ah Sjru Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2023, condition: new, functionality: fully functional, 3 UNITS JWELL - 65 TWIN-SCREW CONICAL EXTRUDER Lrsdoy Sxizepfx Ah Sju

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Lrsdpfjz I S Uwsx Ah Sju Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! Lredpfx Ahe Ad Rdis Sju TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS Ljdpfx Ahey Rxzhj Soru WIDTH: 450 mm FULL OVERHAUL

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Year of manufacture: 2022 Type: 48 V / 20 Ah ELECTRICAL DATA Battery voltage: 48 V Battery capacity: 20 Ah MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 800 mm Weight: 50 kg EQUIPMENT 2 lithium-ion batteries Charger Battery connector Ljdpj Ad N S Esfx Ah Soru Wall plug Lot number 3632 Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 1,952 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Type: P50 Year of manufacture: 2019 Drive: Electric Operating hours: 1,952 h PERFORMANCE Towing capacity: up to 5,000 kg Ljdpfx Ao Ad N Sloh Seru BATTERY Battery date: 06/03/2019 (?) Battery voltage: 24 V Battery capacity: 500 Ah Rest voltage: 24.7 V INSPECTIONS AND SERVICE Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 800 mm Height: 1,400 mm Own weight: 1,000 kg Lot number: 453 Collection conditions: Side loading up to 6 tons is possible using a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 7 mm, total width: 1,700 mm, total length: 31,000 mm, total height: 2,000 mm, input voltage: 400 V, working width: 1,250 mm, coil weight: 5,000 kg, overall weight: 8,800 kg, T20 Trapezoidal Sheet Roll Forming Line for Sale Lrodpezhip Iofx Ah Sou * Model: T20 Trapezoidal Sheet Roll Forming Line * Year of Manufacture: 2018 * 5-ton hydraulic decoiler included * Automatic stacker at the end of the production line The machine has seen very little use and is in excellent working condition. It has been well maintained and is fully operational. The production line is currently dismantled, making it ready for transport. If you need any additional information, photos, or videos of the machine in operation, feel free to contact us.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS COMPATIBILITY FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Suitable for: Linde H50D FEATURES Design: 360° rotating device with rotating clamp Internal opening: approx. 400–1,800 mm Fork positioner: present (?) MACHINE DETAILS MANUFACTURER AND MODEL Manufacturer: Linde Lredpfx Ae Ad N Igeh Seu Type: Rotating clamp Year of manufacture: 2020 Previous use: Linde H50D with 5,000 kg load capacity DIMENSIONS Width: approx. 1,700 mm Height: approx. 1,000 mm Length: approx. 1,250 mm EQUIPMENT 360° rotating device Rotating clamp Fork positioner Lot number: 1139 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,794 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: EXU-SF20 Year of manufacture: 2019 Operating hours: 7,794 h Lifting Capacity and Lift Lifting capacity: 2,000 kg Lift height: 150 mm Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 250 Ah Battery year of manufacture: Measured idle voltage: 25.4 V MACHINE DETAILS Dimensions and Weight Length: 2,000 mm Width: 800 mm Height: 1,400 mm Own weight: 800 kg EQUIPMENT Battery charger Functional and condition video available Lot number: 340 Collection Conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. Lrodpe Ad N H Aefx Ah Sju If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, Lrodpfxozlpabs Ah Ssu • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: ready for operation (used), functionality: fully functional, operating hours: 5,515 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,200 kg Lifting Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: Simultaneous lifting of 2 pallets Ground clearance: Increased by initial lift, suitable for uneven surfaces Battery Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 24.6 V Battery year of manufacture: 2023 MACHINE DETAILS Machine data Ljdpfxe Ad N E Ej Ah Soru Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 5,515 h Own weight: 1,500 kg Dimensions Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm EQUIPMENT Initial lift Battery year of manufacture 2023 Formerly a Linde full-service unit Lot number: 370 Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 6,655 h Lrsdpfj Ad N Eljx Ah Ssu Lifting Capacity and Lift Lifting capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: available Pallet capacity: 2 pallets simultaneously Battery Battery year of manufacture: Week 44/2023 Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 25.5 V MACHINE DETAILS Dimensions and Weight Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm Own weight: 1,500 kg EQUIPMENT Initial lift for increased ground clearance on uneven surfaces Previously a Linde full-service machine Lot number: 390 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 6582016004, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Detailed information about the machines is provided in the attached file. Lodpfx Ajztxtaoh Seru

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Lrsdj Ad N D Uspfx Ah Sju Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.