Board and lumber stacker

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Dwodpfx Agozquqcjgeb Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Dwjdpfx Agoh Tfqhegeb Speed ​​2340 rpm Suction DM 500 mm Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, controller model: SINUMERIK 840D SL, laser power: 3,200 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, The machine was exclusively serviced by Trumpf until 2023 as part of a maintenance contract. TECHNICAL DETAILS Working length: 3,000 mm Working width: 1,500 mm Working height: 115 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 115 mm Maximum workpiece weight: 900 kg Sheet thickness steel max.: 20 mm Sheet thickness stainless steel max.: 12 mm Sheet thickness aluminum max.: 8 mm Sheet thickness max.: 20 mm Feed rate X-axis: 100 m/min Feed rate Y-axis: 200 m/min Feed rate Z-axis: 80 m/min Cutting speed: 140 mm/min Positioning speed X/Y-axis: 140 m/min Repeat accuracy: 0.05 mm Smallest programmable step: 0.001 mm MACHINE DETAILS Laser type: CO₂ laser Laser source manufacturer: Trumpf Laser source model: TruFlow 3200 Laser power: 3,200 W Laser wavelength: 10,600 nm Cooling type: Water Control type: CNC control Control manufacturer: Siemens Control model: SINUMERIK 840D SL Automation level: Semi-automatic Operating type: Electric Input voltage: 400 V Input current: 100 A Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,500 x 7,600 x 2,200 mm Total weight: 12,000 kg Laser hours NC control: 35,623 h Laser hours resonator / pump 1: 34,258 h Laser hours beam on / pump 2: 10,155 h EQUIPMENT CE marking Central lubrication system Cooling unit Documentation / manual Dwedpfx Agjzyakgegeb Dust extraction Emergency stop switch Safety light curtain

Condition: used, Year of construction: 2001, lifting height: 11,500 mm, TECHNICAL DETAILS Platform height: max. 11.50 m Number of people: max. 2 Weight of people: 215 kg Weight of materials: 55 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. Dwodpfx Ajzwpd Roggob No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the item on-site before the end of the auction.

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Dwedpfx Aehuthyoggeb Ready for immediate use.

Condition: used, machine/vehicle number: 425130268, Year of construction: 2016, operating hours: 813 h, load capacity: 1,000 kg, fork length: 1,150 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Auction of two Jungheinrich EPL 110 (manufactured in 2016 & 2015) The 2015 unit is defective and will be sold as a source of spare parts! TECHNICAL DETAILS Lifting capacity: 1,000 kg Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Djdozwpctopfx Aggjwb Battery capacity: 85 Ah Dimensions & Weight Dimensions (L x W x H): 1,600 x 800 x 1,940 mm Self-weight: 500 kg Serial number, unit 1: 425130268 Operating hours, unit 1: 813 h UVV certificate, unit 1: 04/2026 EQUIPMENT Integrated battery charger The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: used, Year of construction: 2022, total length: 400 mm, total height: 450 mm, total width: 400 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 400 x 450 mm Weight: approx. 20 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. Dodpfx Ajzwn Tksggjwb The technical data provided is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: new, Year of construction: 2024, Chopper knife 40 x 40 concave Knife for Weima, large size ... Dwedpebxu Dhofx Aggjb Suitable for almost all common shredders/granulators Available from stock in Bitburg Subject to prior sale

Condition: used, machine/vehicle number: FPR4012012202007256, Year of construction: 2022, total length: 800 mm, total height: 450 mm, total width: 600 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Onyx filament: 800 cm3 Fiberglass filament: 50 cm3 MACHINE DETAILS Dimensions & Weight Dodpfxezwn Tdj Aggewb Transport dimensions: approx. 800 × 600 × 450 mm Transport weight: approx. 30 kg EQUIPMENT Markforged EIGER Software Cloud Online Version Markforged EIGER Software Desktop Online Version Early access to new features 3 × FFF quick-change nozzle 3 × CFF quick-change nozzle Markforged Drybox for material storage The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: used, Year of construction: 2022, machine/vehicle number: 102003026, overall weight: 341 kg, load capacity: 600 kg, protection type (IP code): IP52, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 600 kg Max. speed: 2 m/s Protection rating: IP52 Djdpfx Ajzwn S Tsggswb MACHINE DETAILS Dimensions & Weight Transport dimensions (L × W × H): approx. 1,380 × 1,000 × 1,180 mm Weight: approx. 341 kg The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter Dwsdpfxsqup Ans Aggjb - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm Djdpfxezv Rc Ss Aggowb MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Scanner Dwsdpozv Rhuofx Aggsb Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Dwodpfx Ajwgbxzoggob

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit Dwodpfx Ajzv Rcrsggsb - Adhesive remover - Polishing unit - Automatic feed