Band saw

Macc SPECIAL 411 CSO

Condition: new, MACC SPECIAL 411 CSO band saw with gravity feed New, CE compliant Nledpfx Aoficb Tjazsg The key features of the machine (blade support rigidity, flywheel sizing, band guide, band tensioning) have been the subject of careful study in order to prevent band stress, increase its lifespan, improve cutting linearity, and reduce cutting time. – Band saw with arc-cut, adjustable by a hydraulic circuit, manual bar feed and vice closure, manual head return – Vertical rotation on a pin with adjustable tapered roller bearings, free of play – Band drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear – Appropriately sized flywheels – Robust band guides made with sealed guide bearings and adjustable carbide inserts – Band tension obtained via an electromechanical device with a microswitch-controlled blade rotation – Vice with quick-feed device – Safety device on the flywheel cover, on the control handle, and on the blade – Hydraulic cylinder for controlled descent – Cutting thickness 1.2 mm – Cutting range 45° left, 60° right – Adjustable stop for cuts of the same size – Low-voltage 24 V system – 0.06 kW electric pump for band cooling – Stand with drawer for chip collection and removable tank for coolant – Machine designed for movement with a pallet truck

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm Nsdpfsu Dbvtjx Aazelg 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm Nlsdpfx Ajt U R H Usazog L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Nlsdpfx Aaev Ngraezeg Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. Nodpfjudi Unsx Aazelg The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, measuring length bis 5700 mm Nledpfxjfv Atlj Aazog Tube length 6000 mm numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Nodpfxjxq N T Eo Aazjlg Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Nsdpfxewwvwys Aazslg

Condition: new, cutting diameter 355 mm dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device Nlsdpfx Aaemhm Aqezsg - Tape tension control via manometer - Electr. automatic cooling

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 Nlsdpfx Aeupy Spoazsg 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg