MAGGI BEST 960

MAGGI BEST 960

Condition: used, Maggi Best 960 IDC000099 Fpsdpsu Dh Hlefx Abuoc

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Fein, Balancer spring balancer Fpjdpfx Aoinwumjbujc -Load capacity: 1-3 kg -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/200/135 mm -Dependent weight: 3 kg/piece

Condition: like new (used), Motor power: 3 kW Table dimensions: 2000 × 770 mm Cutting angle adjustment: 3 positions Fpodpfoxcwgdex Abuec Year of manufacture: 2009 Maximum cutting height: 125 mm Maximum cutting width: 865 mm Power supply: 400 V

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Fjdpfxoww Nd Ts Abujpc Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), Planer (four-sided planer) Fedjwg S Tvjpfx Abuepc Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: used, functionality: fully functional, Working width 410 mm Length of jointer tables each 1,000 mm Cutterhead motor 3 kW 2-knife cutterhead Motorized height adjustment of thicknessing table, Fine thickness adjustment via handwheel Thickness setting readable via scale, Manual star-delta main switch Pressure rollers in thicknessing table Fpsdpfx Ajyba S Isbuec Ribbed feed roller Cutterhead safety guard for surfacing operations Side fence tiltable

Condition: used, roll diameter 400 mm throat 385 mm workpiece height max. 335 mm cutting speed 25 - 150 m/min table surface area 595 x 595 mm saw band length 3400 x 6-16 x 0.9 mm work height max. 1020 mm voltage 400 V Fpjdpfx Aexab A Rebusc total power requirement 1.5 kW weight of the machine ca. 470 kg dimensions of the machine ca. 950 x 850 x 1920 mm good / well-maintained condition (!!) Equipment: - electro-motoric / robust, vertical band saw machine - continuously adjustable saw blade speed * Adjustment range via handwheel .. 25 - 150 m/min. - continuously adjustable height of the blade guide - continuously adjustable saw blade width - solid work table - machine base frame - control cabinet with main switch

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed Fpodpfxexabzto Abuoc - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Height range: 38 mm - 197 mm Production capacity: up to 500 c.p.m. Fpedpetqmrysfx Abujc No. of heads: 6