Used Abe Keg Wascher for sale (9,698)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line Dodpfjz D S Sbjx Al Seku - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Dkedpfeycigkox Al Ssu

Condition: ready for operation (used), Bench drill – ALZMETALL AB 35 S - Drilling capacity in steel approx. 45 mm - Drilling capacity in cast iron approx. 48 mm - Spindle mount MK 4 - Arm reach approx. 350 mm - Drilling stroke approx. 180 mm - Spindle speeds / 2 stages / 65 - 1450 rpm (VARIABLE) - Automatic feed rates 0.1-0.2-0.3-0.4 mm/rev - Drilling depth stop - Table clamping surface approx. 600x460 mm - Table adjustment approx. 600 mm - Table height adjustable via crank Dkodpsznlf Esfx Al Ssu - Column diameter approx. 200 mm - Motor power approx. 3.5 kW - Coolant system - Work light - Speed indicator Dimensions: L x W x H 1.1 x 0.7 x 2.1 meters / Weight approx. 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), Bench drill / ALZMETALL AB 40 ST -Drilling capacity in steel approx. 50mm -Threading capacity max. M30 -Tool holder MK 4 -Spindle stroke approx. 160mm -Automatic feed rate 0.1-0.2-0.3-0.4mm/rev -Overhang approx. 300mm Dodpfx Ajzm Tb Esl Sjku -Continuously variable speed adjustment (variator) -Right/left rotation -Height-adjustable work table via hand crank -Work table size approx. 740x460mm -Motor power approx. 3 kW Dimensions: L x W x H 1.2 x 0.8 x 2.2 meters / Weight approx. 1200 kg Errors and omissions excepted.

Condition: used, Year of construction: 2019, Semi-automatic KEG system with two stations. Additional title: Keg cleaning and filling system Capacity: 30 KEG/h Power: 6 kW Current: max. 15,0 A Voltage: 400V AC Formats: 10 L, 15 L, 20 L, 30 L, 50 L KEGs, with flat fitting Running direction: left to right Operation / Control: Control box with touchpanel, Simatic S7-300 Material: stainless steel Position: free standing Djdsw Uvdyspfx Al Ssku Features: 2 stations, CIP station with 2 tanks, KEG infeed and outfeed roller conveyors, control cabinet with touch panel

Condition: used, Year of construction: 1984, Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Operation / Control: Siemens S7-300 Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet Dkedpfxsztx Uwo Al Seu

Year of construction: 1986, condition: ready for operation (used), Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout. Dsdpfx Ashp N Ucel Ssku

Condition: used, Year of construction: 1984, A carousel system for cleaning the inside of and filling kegs. Additional title: cleaning and filling Capacity: 60 Keg/h each 50 l Dkedsztyyzspfx Al Sju Formats: 20 l-, 30 l- and 50 l-keg-barrels (DIN and Euro) Base construction: rotary Features: 4 cleaning heads, 1 filling head

Condition: used, Year of construction: 2006, KEG system, manufacturer Lang, type: Variomat 1+1, for 30 KEGs/h, with 1 internal cleaning station and 1 filling station, with 1 detergent container for hot caustic solution, steam-heated, suitable for stainless steel KEGs and PET KEGs. Dsdpfx Alsyzfuvj Sjku

Condition: used, Year of construction: 2013, KEG filler, make Framax, type: F-2-Ecodraft, 2 filling stations, made of stainless steel, control cabinet with touch panel, built on base frame, built in 2013; Dkodpforxuh Sox Al Sju overall dimensions L: 850 mm x W: 1100 mm x H: 2000 mm

Condition: reconditioned (used), Year of construction: 1998, KEG system, manufacturer: GEA Till, type: KEG-BOY C2, for approx. 25 KEGs/hour, for KEGs with flat fitting, with 1 internal cleaning station and 1 filling station, with 1 cleaning agent tank, with control cabinet. The system is overhauled and equipped with a new control unit. Djdsw Hxuyspfx Al Ssku

Condition: used, Year of construction: 2012, KEG filler, make Lambrechts, semi-automatic, 60 KEGs/h at one-way KEGs, 1 filling stations, in stainless steel, control cabinet with touch panel, compact design, overall dimensions L: 800 mm x W: 870 mm x H: 1980 mm , year 2012 Dksdpfx Aljrxuits Sou

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. Dedpfx Alozmx Sco Soku TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, KEG system, manufacturer: M+F, type: Micromat M 2/2, with 1 internal cleaning station and 1 filling station, equipped with detergent tank Dodpfjyzhviox Al Soku

Condition: used, Year of construction: 1997, KEG-plant Dedpfxsxbqh Se Al Sjku Additional title: inside cleaning and filling plant Performance: 20 KEG`s/h wash and fill with 30 l KEGs Power: 8 kW Voltage: 400 V Frequency: 50 Hz Length: 1400 mm Width: 1100 mm Height: 2300 mm Weight: 250 kg Formats: 10 - 50 l KEG drums with flat fitting Operation / Control: OP7 operating console, Siemens Simatic S5 - 95U Material: Edelstahl Position: frei stehend Base construction: Square tube construction on dome feet Features: 1 tank for cleaning agent, electrically heated; 1 combination cleaning and filling station with flat fitting, 1 stainless steel pump, 1 stainless steel control cabinet

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO Djdpfx Alev Di Dne Soku 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Dkedpfx Alozhnluj Ssu

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Dksdpsxwy H Asfx Al Ssu Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Frequency: 50 Hz Length: ca. 2200 mm Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: used, Filler for party cans and siphon bottles; with CO2 and compressed air supply. Dkedpjw Td E Ajfx Al Seu Length: 985 mm Width: 590 mm Height: 1435 mm

Condition: good (used), Fan model: HPB-F-040-300T Motor model: SKh90-2S2 Latest use: Air cushion table External dimensions: Dsdsyz Tc Iepfx Al Soku Width: 700 mm. Depth: 450 mm. Height: 450 mm. Weight: approx. 20 kg. Condition: good, second-hand

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We are offering this almost unused WABECO F1200 vertical drilling and milling machine, manufactured in 2025. The machine was run once for approximately 20 minutes and has not been used since. The accessories included are the base cabinet, machine vise, collets, tool holders, drill chuck, fastening kit, and dial indicator with magnetic holder, as well as a milling tool set. As mentioned above, the vise was used once, and the 10 mm milling cutter was used once; otherwise, everything is still in its original packaging. Dksdpfxez I Dwwj Al Sju You can find these items on the Wabeco website for comparison. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), EPSON ES451S Robot SRC-320 ABS Controller Dkodpfx Ashx Rhdol Ssu Robot

Condition: used, Please contact Bart Hoogakker for more information Dkedpfx Aew Ei N Ssl Sju

Condition: used, functionality: unexamined, machine/vehicle number: 201142, Bustec ProDAQ 3020-AB USB2.0 Slot-0 Interface / GPIB Port Dsdpfx Aoxr Dgisl Ssku

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Film up to 1400 cm wide With ParsControl Gravimetric AB line Dkjdpfx Alszd Ai He Sju