Used Automation Component for sale (16,983)

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Nljdpfoy N Dvbjx Agyjc Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: good (used), Cleaning booth for component cleaning using a high-pressure cleaner. Previously used for cleaning components after 3D printing (e.g., for removing support material). Operation via foot switch. Nljdpfsza T Nksx Agyec In good condition.

Year of construction: 2011, condition: used, Packaging Automation PA182 tray sealer 1.2802E+11 Stainless tray sealer, two station rotary table, up to 40 packs per min, mobile, current tooling 210mm x 165mm tray Nlsdpfx Ajdbqtqegyoc

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 240 h, control type: CNC control, controller manufacturer: Hypertherm, controller model: Edge Connect TC, sheet thickness steel (max.): 40 mm, working length: 3,000 mm, working width: 1,500 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 5,000 kg, warranty duration: 12 months, Used Esprit Automation CNC Plasma – High Definition XPR170 This Esprit Automation CNC plasma cutting system is presented in exceptional, near-new condition with less than 300 operating hours. Built for precision and reliability, this machine is equipped with a Hypertherm XPR170 high-definition plasma system, delivering superior cut quality and performance across a wide range of materials. Key Specifications: Cutting Area: 3000 x 1500 mm Plasma Source: Hypertherm XPR170 (High Definition) Nedoyzuw Tepfx Agyolc Gas System: VWI Gas Module Included Piercing Capacity: Up to 40 mm Mild Steel Operating Hours: < 300 hours Condition: The machine is in pristine condition, having seen minimal use in a controlled environment. Fully maintained and ready for immediate operation. Additional Information: 12-month parts warranty included Ideal for high-precision fabrication, engineering, and production environments Excellent opportunity to acquire a premium CNC plasma system at a fraction of new cost

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity. Nlsdpfx Agsyylqbsyjc

Year of construction: 2025, condition: new, functionality: fully functional, the Seamark XC1000 X-Ray Component Counter: Smarter, Faster, and Fully Automated At Active-PCB Solutions, we know that accuracy, efficiency, and seamless integration are not optional, they’re an essential part of our manufacturing process. That’s why we’re excited to introduce our new Seamark XC1000 X-Ray Component Counter which has just been installed on our shop floor by Advanced Manufacturing Solutions Ltd. The next-generation offline X-ray component counting system is designed to redefine how we manage and verify our SMD component inventory. You can find out more about this new technology and how we intend to put it to full use below! Introducing the Seamark XC1000 X-Ray Component Counter Precision Counting Powered by AI Leveraging an advanced AI algorithm, this intelligent Seamark XC1000 X-Ray Component Counter system provides 99.99% counting accuracy for all SMD components sized 01005 and above, meaning we can say goodbye to manual errors and time-consuming reel unpacking. The XC1000 counts 1 to 4 reels simultaneously with no unspooling, no guesswork, and no downtime. Ergonomic Design Meets Automation The XC1000 features an ergonomically designed workstation where the operator can sit comfortably and monitor the easy-to-read counter screen. With an automated stage movement system and anti-pinch safety design, reel handling is simple, safe, and efficient. The unit is compact and mobile, thanks to built-in wheels for easy relocation. Smart Labeling and Real-Time Integration Mislabeling and manual input errors are inevitable and costly. However, with its error-proof labeling function, the XC1000 automatically detects and recognises each reel, instantly printing the correct label via a TSC industrial printer. This intelligent workflow is further enhanced by seamless real-time integration with MES, ERP, and WMS systems, enabling live data exchange and automatic result uploads. Built for the Modern SMT World Nlsdpfx Asyzpkzegyjc The XC1000 is built to handle the full range of reel sizes (7”–15”), heights (5–80mm), and component types, including moisture-proof bag packaging, bulk materials, and JEDEC trays. Its amorphous silicon flat panel detector delivers sharp, high-resolution images with a 430mm × 430mm field of view, supported by four optional cameras for automatic barcode reading. Industry-Leading Database & Cloud Intelligence What sets the Seamark XC1000 X-Ray Component Counter apart is its dynamic, global X-ray component database, which includes: 15,000+ material profiles 60 million+ testing images 700,000+ core reference images Weekly updates with 160,000 new images Over 8.6 million classification training images This continually evolving database ensures compatibility with 99.2% of global components. Updates are cloud-synced monthly, keeping the whole system current and reliable. Key Technical Specs at a Glance Input Power: 220V, 10A, 50–60Hz Control System: Windows 10 64-bit X-Ray Source: Sealed microfocus (30–80KV, up to 1000 μA) Detector: 3072×3072 matrix, 139μm resolution Max Output Power: 56W Counting Speed: Fully automated, operator training not required.

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Nodpfsya H S Sjx Agyslc Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp Njdpfx Agsxwvrujyolc - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: new, functionality: fully functional, Deutschmann Automation Unigate CL-PBDPV1 CL profibus. Complete PROFIBUS-DP-Slave interface Automatical Baud rate recognition (9600 bit/s - 12 Mbit/s) DPV0 and DPV1 supported Nljdpfx Agov N Ru Ejyjc Isolated PROFIBUS interface with 9-pin. D-sub connector PROFIBUS address adjustable via rotary switch Up to 244 Bytes input- and 244 Bytes ouput data (total data length 488 Bytes) Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc. Nlodpfxowkqmio Agyjc

Condition: good (used), CNC control, control rack, electronic module Nlodpfx Ajwt R Iregysc -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Condition: good (used), Year of construction: 2008, CNC control, control rack, electronic module Nledpfxjwubtno Agysc -Manufacturer: Power Automation / Innovance Technology, CNC control -Type: PA8000 LW -Dimensions: 330/250/H130 mm -Weight: 5.9 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller Njdpfswt Rzlsx Agyjlc -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt, slat conveyor belt -Manufacturer: FAPRO Autumation, conveyor belt slat conveyor belt on a mobile base frame -Speed: 12 m/min -Conveyor belt width: 600 mm -Conveyor belt length: 2570 mm, dimensions see technical photo. drawing Nledpfx Ajpix Nyogyjc -Outlet height: 1225 mm -Transport dimensions: 2600/690/H1225 mm -Weight: 120 kg

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt Nsdpfx Ageibichoyelc - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: new, Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item condition: New as shown Possible traces of storage, installed but not put into operation. Nlodpfxjpug Ays Agyec Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Aluminum chassis with plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Nledpfex Elfcjx Agyoc Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Nlsdpfx Ajx Elkfogyjc Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Nedpfxopiufwj Agyslc Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fully automated robotic cells for different industries having main components: product preparing / aligning belt, Fanuc robot unit (different type based on application requirement), robot stand, robot gripper, roller / belt conveyor for final product. Machines are controlled by HMI interface no need to know robot programming code to operate the machines. We develop applications for staking, transferring , palletizing, sorting, pick and place, group and insert into boxes for bags, buckets, bottles, boxes, cans,etc. Nodpfeuvg Ahjx Agyslc Each robotic cell can be upgraded with industrial vision system , labeling systems, marking systems and also software for monitoring production.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Nledpfx Agsxf Urpsyoc Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz Nlodpfx Agjxw Rdleysc - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts Nljdpsux Shvsfx Agyec 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 50 kg Good condition Nodouqrahopfx Agyolc A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Nsdpfx Ageu Ailgoyjlc Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.