Used Striffler 2750 for sale (281)

Year of construction: 2015, condition: used, Membrane press Manufacturer: Columbus Type: Multimat Year of manufacture: 2015 Technical data - Press table: 3000 x 1400 mm MULTIMAT - Membrane press table Mobile table with a pivoting heating hood and membrane frame Fpodszu Ammopfx Aaysl High-performance vacuum pump TF 40, final pressure adjustable up to a maximum of 900 mb (9 t/m²) Pneumatically pivoting film fixing frame Usable membrane frame incl. highly elastic silicone membrane (700% elongation) Aluminum heating hood, fully insulated, continuously adjustable from 0 to 140 °C Digital differential pressure control Entire system (incl. vacuum pump) maintenance-free Electrical connection (incl. heating hood): 10 kW, 400 V, 50/60 Hz Dimensions: External dimensions: 3200 mm x 1600 mm Usable area (without membrane frame): 2800 mm x 1200 mm Usable area (with membrane frame): 2750 mm x 1150 mm Table / working height: 900 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm External dimensions: Width: 1900 mm Length: 2750 mm Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Fpodpfjzdrbxjx Aayel Please see my other listings.

Condition: used, Manufacturer: CFS Model: BR6000/600 Year: 2001 Condition: Used Serial Number: 1402 Stock Number: 3426B Belt width: 600 mm Belt: Eyelink belt for extra small products Frying length: 6000 mm Heating: Thermal oil Power: 3 x 400V, 50Hz, 8.6kW Dimensions: 8700 x 2200 x 3800 mm Weight: 4250 kg CFS oil filter Type: OMR120 Serial number: 60 Year of construction: 2005 Dimensions: 2750 x 1100 x 1700 mm Power: 3 x 380V, 50Hz, 4.5kW Weight: 525 kg Including pallet filterpaper NN ambient cooling conveyor Belt width: 950 mm Belt length: 6000 mm Belt: eye link belt of 3 mm Compressed air: 6 Bar Power: 3 x 380V, 50Hz, 2.7kW Dimensions: 7600 x 1700 x 2000 mm Fpedjzw Dzwopfx Aayol Variable speed control Wanson Themopac thermic boiler Type: 200B Serial number: 9335.56445 Year of construction: 1986 Heating: natural gas Heating power: 233 kW Power: 3 x 380V, 50Hz, 7.5kW Dimensions: 3000 x 2450 x 2600 mm Installation built into 10ft container

Condition: used, machine/vehicle number: 26517, Year of construction: 2009, operating hours: 20,026 h, load capacity: 3,000 kg, lifting height: 5,900 mm, free lift: 1,780 mm, fuel type: diesel, mast type: triplex, construction height: 2,650 mm, Equipment: cabin, sideshift, .: 26517 Machine Details: Year of manufacture: 2009 Load capacity: 3000 kg Lift height: 5900 mm Recorded operating hours: 20,026 h Free lift: 1780 mm Mast type: Triplex Mast height: 2650 mm Fjdpfxjy Dtcto Aayjpl Length/Width/Height: 2750 / 1250 / 2200 mm Operating weight: 4770 kg ---- Features: * Overhead guard * 3rd hydraulic valve * Full cabin * Full free lift * Soot filter * Heater * Front work lights * Rear work lights * Non-marking tires ----- Attachments: * Side shifter ---- Additional Equipment Information: * Reversing alarm * Beacon light ---- Operating hours stated are generally those read from the hour meter. We are happy to offer suitable transport solutions. An additional 250 - 300 forklifts, attachments, and sweepers available immediately. Rental options also available! We will gladly purchase your used equipment. Do you have questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to hearing from you! We speak English. Intermediate sale and errors for this offer are expressly reserved. For trade sales, the machine is sold as is, not refurbished. All information provided without guarantee. Errors and changes excepted.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, total width: 2,750 mm, total length: 1,950 mm, total height: 1,750 mm, grinding diameter: 250 mm, Machine complete with filter unit and documentation. Grinding diameter (maximum workpiece Ø): 250 mm. Centre distance / maximum grinding length: 750 mm. Grinding wheel (max. size): 400 × 40 × 127 mm. Grinding spindle motor power: 5 kW. Grinding wheel speeds: approx. 2140 / 2640 rpm. Workpiece mounting: between centres, tailstock; suitable for external cylindrical grinding. Dimensions (L / W / H, approx.): 2750 mm / 1950 mm / 1750 mm. Machine weight: approx. 3.9 t (≈ 3900 kg). Fpjdsxz Tvxjpfx Aayol

Condition: used, machine/vehicle number: 26719, Year of construction: 2012, operating hours: 15,635 h, load capacity: 7,000 kg, lifting height: 4,850 mm, fuel type: diesel, mast type: simplex, construction height: 3,580 mm, Equipment: cabin, .: 26719 Device details: Year of manufacture: 2012 Load capacity: 7000 kg Lifting height: 4850 mm Recorded operating hours: 15635 h Mast type: Standard Mast height: 3580 mm Length/Width/Height: 3350 / 2250 / 2750 mm Operating weight: 11855 kg ---- Equipment: * Canopy * 3rd valve * 4th valve * Full cabin * Heater * Front work lights * Rear work lights * Air conditioning * Dual tires ---- Additional device information: Rotating beacon Seat heating---- The operating hours are generally recorded hours. We would be happy to offer you the appropriate transport. Another 250 - 300 forklifts, attachments and sweepers are immediately available for you. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 am to 4:00 pm, you can reach us. We look forward to hearing from you! We speak English. Fpjdpezvfi Tofx Aayol Subject to prior sale and errors for this offer. In the dealership, the device is sold in its current condition, without refurbishment. All information is without guarantee, errors and changes reserved.

Year of construction: 1982, condition: excellent (used), Manufacturer: STRIFFLER Model: 2766 Year of manufacture: 1982 Dimensions: approx. 0.8 x 0.8 x 1.2 m All information is provided without guarantee. Fjdpofdxd Esfx Aayopl A demonstration can be arranged in our showroom at any time.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical specifications of the DURMA AD-S 30175 press brake number of axes: 4 (X, Y1, Y2, R) maximum pressing force: 175 tons maximum bending length: 3050 mm slide stroke: 265 mm reach: 410 mm approach speed: 140 mm/s bending speed: 10 mm/s return speed: 130 mm/s distance between columns: 2600 mm stopping time: 102 ms stopping distance: 8 mm safety distance: 263.2 mm oil tank volume: 200 l maximum operating pressure: 285 kg/cm2 motor power: 18.5 kW current: 37 A current protection: 50 A control voltage: 24 V power supply: 3 x 400 V; 50 Hz dimensions (L x W x H): 5450 x 2550 x 2750 mm weight of the DURMA AD-SERVO 30175 machine: 10830 kg Equipment of the DURMA press brake Fodpfx Ajzx S H Rsayopl CNC control unit: CYBELEC ModEva 10S manual deflection compensation European-type tool clamping system European-type punches and dies powered back gauge front supports with T-slots and tilting stop

Condition: like new (used), Year of construction: 2026, operating hours: 22 h, overall weight: 1,500 kg, We offer a demonstration table-type shot blasting machine – high-quality Czech production, using quality materials in its manufacture. Type – TSM1. Number of operating hours – 22. - Turntable diameter – 1000 mm - Maximum height of the blasted part – 550 mm - Overall machine height – 2750 mm - 1x blasting turbine – power consumption – 5.5 kW, turbine with a frequency converter for regulating the turbine rotation speed. The turbine has both left and right rotation directions, as needed. - Abrasive conveying system – power consumption – 0.75 kW. - Table rotation – power consumption – 0.75 kW - Total machine power consumption – 7 kW. Fpjdpsztvclofx Aayel The cabinet is lined with manganese steel. We also manufacture table-type shot blasting machines with a table diameter of 1500 mm. A significant advantage of the machine is the ability to change the turbine rotation direction to either right or left. Shot blasting equipment with CE certification. Another advantage of the equipment is its high efficiency during shot blasting, quiet operation, low energy consumption, and the requirement for a small space for installation. In its category, this table-type shot blasting machine can be considered very well-designed. (Sandblaster, sandblasting, shot blasting, sandblasting equipment, shot blasting equipment, shot blasting machine). Blast machine.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 145,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC Fpedeyl S Ngspfx Aayol CAPACITY: X-Axis Travel: 7570 mm Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm

Condition: good (used), Year of construction: 2016, machine/vehicle number: TAD174116002, Offer 26235 Technical data: - Working width: 4100 mm - Pressing force: 170 t - Distance between columns: 3600 mm - Overhang: 400 mm - Max. installation height: approx. 400 mm - Ram stroke: 225 mm Fpedpfszu Na Hjx Aayjl - Working height: approx. 920 mm - Motor power: approx. 18 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 4800 x H 2750 x D 2300 mm - Weight: approx. 12500 kg - Includes: - Swivel arm – control panel with ESA control - For 4 axes Y1 + Y2, X, Z - Motorized back gauge with motorized height adjustment - Crowning - Safety – light curtain - 4-way universal die + split ram tool 4000 mm - Pointed tool 4000 mm - Ram tool 3000 mm - V-die 3000 mm - Electric foot switch - Side-mounted adjustable support arms

Condition: used, machine/vehicle number: 25211, Year of construction: 2009, operating hours: 9,074 h, load capacity: 3,200 kg, lifting height: 5,980 mm, free lift: 2,120 mm, fuel type: diesel, mast type: triplex, construction height: 2,840 mm, Equipment: cabin, sideshift, .: 25211 Device details: Year of manufacture: 2009 Load capacity: 3200 kg Lifting height: 5980 mm Operating hours read: 9074 h Free lift: 2120 mm Mast type: Triplex Mast height: 2840 mm Length/width/height: 2750 / 1230 / 2150 mm Operating weight: 5321 kg ---- Equipment: * Protective roof * 3rd valve * Full cabin * Full free lift * Heating * Front work lights * Rear work lights ----- Attachments: * Side shift ---- Other device information: ---- The operating hours are generally hours read. Fpsdpetw A Tgefx Aayol We would be happy to offer you the right transport. Another 250 - 300 forklifts, attachments and sweepers available for you immediately. Also available for rent, of course! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Prior sale and errors in this offer are expressly reserved. In the dealer's shop, the device is sold in its current condition, not refurbished. All information is provided without guarantee, errors and changes reserved.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Fpodpjyxp Twsfx Aaysl Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: excellent (used), Year of construction: 2012, operating hours: 10,600 h, 5-axis machining center Brand: DMG MORI Type: DMU 80 Monoblock Year: 2012 (spindle hours: 10,600) CNC: Heidenhain iTNC 530 Equipped with: Integrated rotary table, dia. 700 mm / 650 kg 29 kW spindle – 12,000 rpm 32-position tool changer TS 649 touch probe 3D quickset 40 bar central coolant system BLUM laser tool probe Coolant gun Chip conveyor Specifications: Table surface 1250 x 700 mm X-axis travel 880 mm Y-axis travel 630 mm Z-axis travel 635 mm B-axis -120/+30° C-axis 360,000° Fpsdpfjzgbv Dsx Aayol Spindle speed 20 - 12,000 rpm Spindle power 29 KW Spindle taper SK 40 Rapid traverse XYZ 42 m/min Machine dimensions with chip conveyor 3440 x 2850 x H 2750 mm Approximate weight 7,480 kg

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fpedpfozxtz Nox Aaysl Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping Fpsdpszrzt Hefx Aaysl * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Condition: used, Year of construction: 2009, weight max. in kg 1000 kg stroke 2750 mm fork length 1200 mm battery 24 / 620 V / Ah Fodjzip Igopfx Aayjpl weight of the machine ca. 1,9 t dimensions of the machine ca. 2,9 x 0,82 x 2,52 m Order picker with charger. Battery new in 2022.

Condition: as good as new (ex-display), Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Fodpfoxabt Aox Aayspl ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Fpjdpfxjwwhn De Aayel

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, load capacity: 205 kg, arm reach: 2,550 mm, controller model: IRC5, The IRB 6640 serie is ABB Robotics latest generation of high payload, high performance industrial robots. Fpjdpfewp N S Uox Aayjl The IRB 6640 is ideal for process applications, regardless of industry. Typical areas are for example Spot Welding, Material Handling and Machine Tending. Specifications Payload: 205 kg Arm Reach: 2750 mm Model Type: IRB6640 Foundry Plus Controller: IRC5 Model Year: 2010 Condition: Tested & Not Painted & Battery Changed Note: The robot has an oil-related issue. Its repairability will be checked in case of sale. Operating Hours: 34.000h apprx. Included: Manipulator + IRC5 Control Cabin + All Wire Sets + Teach Pendant We have a dedicated team handling these robots. If you share details about your project, we can recommend the most suitable robot for your needs and provide support throughout your project. We have big range of robots in stock, and if you are considering bulk purchases, we would be happy to offer a discount. The same model is available from the same or different production years, and bulk purchases can benefit from special pricing. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Fodpsy T I U Aofx Aayepl Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: like new (used), Year of construction: 2019, operating hours: 183 h, load capacity: 8,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, Manufacturer + model: KALMAR ECG 80 / 6 * Mast: 3F4700 ID: 26106.8337 Category: Demo Fsdpfx Aszv Rr Hsayopl Mast: 3F4700 Forks: 2400 mm Lowered height: 2750 mm Lifting height: 4700 mm Capacity: 8000 kg Year: 2019 Hours: 183 hours Capacity: 80v / 1550ah Options: Equipped with: - FULL cabin (safety gates) - Joystick control for forward/reverse - Spreader / S.S. - Complete street lighting!! - LED spotlight - Triplex FFL mast - Flashing light In complete LIKE NEW condition!!!!

Condition: used, maximum load weight: 29,441 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2024, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Fifth wheel height 1120 * Side loading height with lifting roof and interior height 2750 2655 mm * Side loading height without lifting roof and interior height 2750 2610 mm * Total length 13830 mm * Platform interior length 13620 mm * Total width 2550 mm * Platform interior width 2480 mm * Interior width between stanchions 2480 mm * Interior width between longitudinal members (without lifting roof) 2480 mm * Interior width between longitudinal members (with lifting roof) 2430 mm * Neck height 105 mm * Axle spacing 1310 mm * Axle spacing kingpin 1st axle 6390 mm Fpodpfx Aaervu Nzjyol * Technically permissible total weight 42000 kg * Technically permissible axle load 9000 kg * Technically permissible fifth wheel load 15000 kg * External height 3975 mm * Empty weight 6559 kg * Railway code certificate P386 Chassis Steel lamp holder 19 pairs of lashing rings Floor made of screen-printed plate 30 mm Load capacity 7.5 tonnes + steel checker plate at the rear approx. 270 mm deep Rollers Ram buffer at the rear (WIELTON) Pallet stop with lashing holes Steel rear underrun protection Composite - side impact protection Liftable rear underrun protection Axles and suspension Number of axles 3 Rigid axles SAF disc axles 3x9000 kg 22.5 INTRADISC KNORR clamps Brake discs diameter 430 mm Fifth wheel height 1120 Hubodometer Support legs SAF Hercules 2-speed gearbox supports, full load Rims 6x steel rims 22.5-11.75 ET-120 Protective caps for wheel nuts Tires 6x tires 385-65-22.5 Other chassis equipment TIR sign, foldable Tensioning belt with ratchet 7 tons - 8 pieces Fire extinguisher 6 kg Ship fastening straps 4 pairs Two wedges with fastening A-sign, foldable ADR sign, foldable Fire extinguisher box on the front wall Tool box - 165L Railway coding number P 386 F1 Side loading height i.L.: 2,530 mm F2 Internal height i.L. under roof: 2,575 mm Construction Lifting roof (0, +50) Top slats - 7 rows Side tarpaulins with eyelets (at least 24 tarpaulin tensioners) Tarpaulin tensioning device at the front secured with a flap and customs rope (TIR version) Tarpaulin tensioning device at the rear Tarpaulin tensioner with additional lock Customs version on the outer frame with safety lock Sliding roof on one side from back to front EDSCHA HYBRID (TIR version) Aluminum bulkhead with customs eyelets Rear wall as aluminum double-wing door Screen-printed plate 6 mm H=1500 mm 2x transparent tarpaulin pockets for ADR labels Painting of other equipment 2-sided painting (powder coating) bulkhead, doors, corner stanchions Additional painting - color RAL5002 (ultramarine blue) Electrics 2x7-pin + 1x15 pole with EBS connection, without connecting cables to the tractor unit Lighting Hella LED EASYCONN version Rail / Intermodal equipment consisting of Axles with extended air bellows and adaptation of piggyback frame with gripper edges in accordance with Bach specifications Railway coding number P 386 Roller ram buffers at the rear, right and left RoRo Ferry Lashings Intermodal 5-fold ILU code, attached to the tarpaulins on the left and right, on the front wall, on the rear wall and on the roof Positions marked in yellow on the side in the area of the gripper edges (Rail) Side tarpaulins with 24 tarpaulin tensioners in accordance with railway specifications (Complies with the DAIMLER load securing guideline DL 9.5) Roof tarpaulin in accordance with railway specifications All information without guarantee. Errors subject to change. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2010, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 200 mm stroke 100 mm dayligth 308 mm ajustment speed 150 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec Fpodpfxsx Emqto Aayol table width 100 mm table height 900 mm control DNC 60 PS oil volume 100 l voltage 400 V total power requirement 5.5 kW weight of the machine ca. 2750 kg - in checked conditions - machinevideo - ?v=WRzqKruFUvY Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch - Operating Instructions (PDF)

Condition: used, Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Manufacturer: Automation Assistant Oy Type: LG2750 Date of manufacture: 07/01 Machine type: Linear Guided Free Fall Tester For sale is a used Automation Assistant Oy LG2750 Linear Guided Free Fall Tester. This linear guided free fall test stand was designed for reproducible drop and impact tests and is suitable for quality assurance, research, development, and industrial testing applications. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: concrete garden paving stone 300 × 300 × 50 mm Frame: aluminum profile Protective panels: polycarbonate / XT-acrylic Other materials: aluminum, steel and POM Dimensions: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Weight of test tower: approx. 155 kg Weight of impact table: approx. 55 kg Total weight: approx. 210 kg Equipment: Touchscreen control panel Closed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Transport data: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Transport weight: approx. 210 kg Fjdpfozn Uqdsx Aayspl Condition: Used The unit was last used in an industrial setting. Optical condition as shown in the pictures. Scope of supply: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.