Used Deburring And Edge Rounding Machine for sale (70,706)

Year of construction: 2011, condition: excellent (used), Manual chamfering machine for round tubes and bars 4-spindle deburring and chamfering machine Isdezwpwqspfx Am Debc For internal and external deburring/chamfering Spindle speeds: 70/140 rpm Materials: steel, stainless steel, aluminium, non-ferrous metals Diameter: Ø 2 – 75 mm Min. workpiece length: from 100 mm Deburring time: 3–4 sec. / end face The machine is equipped with deburring tools from the manufacturer Kopal. Tool holder is MK3 The deburring tools are adjustable so that the same chamfer depth is always achieved. Very good condition

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm Ibedjxab Hpspfx Am Dec max. dia. of grinding wheel 150 mm milling-head swivable +/- 180° work height max. 945 mm turning speed range 0 - 1400 U/min engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: excellent (used), Year of construction: 1999, Double-sided multi-purpose edge sanding machine with oscillation and 200mm sanding height Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side 200mm sanding width Motorized sanding belt oscillation, therefore no compressed air connection required Drive motor 400V / 3kW Front work table for sanding veneer edges with grooved stop guide (for veneer overhang) Veneer sanding device with fine adjustment, foldable Spring-mounted table, height adjustable and can be positioned laterally Angle stop Rear, inclinable work table for sanding solid wood Both tables are height-adjustable to utilize the sanding belt Belt dimensions 3000 x 200mm Lateral extension table for radius sanding on the 150mm belt roller Feed stand holder 68mm Central dust extraction connection 140mm Very stable frame, 2 swivel casters, 2 steering casters, and lever brake for locking CE marking Isdpsz I T Apofx Am Dobc All graphite pads and dust extraction hoses have been replaced Original paint, only touch-ups in some areas Excellent condition from a small restoration workshop Some sanding belts are included Dimensions approx. 1800 x 1000 x 1250mm (LxWxH). Weight approx. 650kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this seller".

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Ibsdpfez Ea Dzjx Am Dsc Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. Ibjdpfx Aox H Tvfsm Djc It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm Ibjdpfxoz Rxb Rj Am Dec -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot located below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. Ibjdpfx Aoztbutsm Doc The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: good (used), RSA NC-V 2000 Deburring Machine + Tube Washing System + Coral Filter Complete industrial tube processing and post-processing line The system consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to a maximum of 2,000 mm. Ibsdpfezklb Eex Am Dec 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous tube washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge filter dust extraction system Performance: 4 horizontal, high-performance filter cartridges with fully automatic jet-pulse compressed air cleaning (very low maintenance). Function: Reliably extracts brush dust, grinding residue, or fumes from the washing system. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine, specifically designed for the simultaneous internal and external deburring of tube ends and profiles in an industrial continuous process. The number "2000" indicates the maximum workpiece length of 2000 mm, which can be automatically processed in the standard configuration. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Ibsdpfxow Nadgs Am Doc Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Ibedpezuykcjfx Am Djc Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Euro Fintec 410 is a deburring machine which has a 1 inch belt. The belt assembly can be easily adjusted to accommodate complex deburring operations. It comes complete with a dust collection bag to ensure safe operation It is in excellent condition and comes complete with a number of deburring belts. Ibedpszmafqofx Am Djc

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding belt length: 3,000 mm, grinding belt width: 150 mm, table height adjustment: 180 mm, input frequency: 50 Hz, Langzauner LZK 3/4 oscillating edge sanding machine, with veneer edge sanding attachment and feed console Sanding unit adjustable from 0-45° Oscillation Miter stop Height-adjustable sanding table (180 mm) for utilizing the full width of the sanding belt Table size (front) 1000 x 350 mm Table size (side) 400 x 250 mm Connection power 4.6 kW Belt length 3000 mm Belt width 150 mm Iedpfsz D Autex Am Djbc Belt speed 22 m/s Weight approx. 350 kg Space requirement 1770 x 730 mm Year of manufacture 1997 Condition: Functionality tested

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, GREAT PRICE!!! ONLY 6,500,- Original price over 38,000,- Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate, it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g. of cams on a camshaft, or journals of a crankshaft; it is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer; a newer, more modern HP model with a small form factor is included. Max. diameter 350mm Max. test piece height 500mm (higher measurements up to max. 1000mm can be taken by measuring in two halves....) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg, where it was used in a "medically clean environment"; it is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password....). It is also on the USB stick, perhaps to install it on another machine at your location. Accessories are included, the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets via a shipping company. It is already securely fastened to them. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and wrapped with stretch film for transport on the pallets. The system itself is fixed with "transport safety screws".... Shipping is at the buyer's expense and will be carried out on two Euro pallets.... The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on site; this is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, there are several locking screws for transport; if you forget them, the system could be damaged when it starts up. Ibodpfszcqy Esx Am Djc A truly well-maintained, very accurate system that will provide many years of excellent service!!

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Isdpfsnah Tajx Am Dobc Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system Ijdpfsnah Tdex Am Dsbc By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Isdpfx Amezuyk Ns Dsbc Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2019, operating hours: 5,800 h, functionality: fully functional, Timesavers 42 Series WRBW (Belt Sander / Rotary Brushes / Belt Sander) Year of manufacture: 2019 Only 5,800 operating hours! Includes an ATEX exhaust system from Ulmatec. Inspection is also possible. Iedpfx Asz A Ucmjm Debc

Condition: used, Fish Filleting and Heading Machine Make: VMK Ibedpfx Ajzi Tl Njm Dsc Model: 18 + 181 With spare parts Working order, as back from factory

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm – 150mm adjustable Working width: 1150 mm Isdpjm Nlm Dofx Am Dobc Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. Ijdpfxjm Rpy Ro Am Dobc The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). Ijdpfx Amjz Afcte Dsbc If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2016, condition: ready for operation (used), MFK U.06845 Universal edge and contour milling machine, edge milling machine Motor power: 0.5 kW Speed: approx. 17,000 rpm Chamfer width, stepless: 0-3 mm Table: 280 mm x 300 mm Space required: 280 mm x 300 mm x 205 mm (L x W x H) Weight: approx. 22 kg Ibedpfxjz E U I Uo Am Dec Year of manufacture: 2016 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Iedezuwyzepfx Am Dsbc Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Year of construction: 2017, condition: used, Year 2017 Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery Ibsdpoz Ic Arjfx Am Doc only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Ibodpfsz Slnhsx Am Djc Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.