Used Fliegl Sds 390 Roadrunner for sale (2,038)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe Pjdpfoy Tvphox Am Tegp * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031190, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 03/2027, loading space length: 9,300 mm, loading space width: 9,300 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: grey, The images are archive images. The vehicle may still be in use! Unbeatable unladen weight! Chassis, semi-trailer, tipper Fine-grain steel welded construction, lightweight design, kingpin plate with interchangeable 2" kingpin Curved front panel "Patented" 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2x chock blocks with holder Aluminum side underrun protection Underrun protection, foldable 6x half-shell fenders Integrated "fender holder," surface is dirt-repellent 2x with anti-splash flaps, only on the last axle 2x tow hooks at the rear Axles + Suspension SAF disc brake axles Axles in off-road design "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid, activated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism," 10-year warranty against rust-through Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Pgedpfxsy Rlvro Am Tsp Wheels and tires 6x 385/65 R22.5", manufacturer at the discretion of the manufacturer 6x steel rims, manufacturer at the discretion of the manufacturer Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow profile, cleanly welded, with top profile that prevents material from spilling. Interior with climbing aid on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - tapered and aerodynamic tipper body shape "Membrane" - rear wall Rear wall as a swing-open flap with "double-joint hinge," externally supported with double hook lock. Rear wall with rubber seal Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel, and rolled gravel with a maximum grain size of up to 20 mm! All other goods are excluded from the warranty! Rolltarp, single-sided, for storing on the right-hand side, with central locking on the left-hand side Unbeatable unladen weight! The images are archive images. The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031191, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R22,5", color: grey, The images shown are archive photos. The vehicle may still be in use! Chassis: Semi-trailer tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2'' kingpin Patented curved front panel 24-ton 2-speed landing gear, single-side operation, with straight base, with lateral compensation 2x wheel chocks with holders Side underrun protection: aluminium Rear underrun protection, foldable 6x half-shell mudguards Integrated "mudguard holder" with stone-repellent surface 2x with anti-spray flaps (only on the last axle) Axles & Suspension 3x SAF disc brake axles Axles in off-road specification "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and traction aid, activated by "braking 3x". (Traction aid functional up to 30% axle overload and up to a max speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" – 10-year warranty against corrosion Braking System 2-line compressed air braking system Coloured line routing for easy servicing Spring-actuated parking brake 2 fail-safe coupling heads at the front, without connecting line EBS by Haldex, electronic braking system with EBS socket at the front (without connection cable) Podpfx Amjy Rl Une Tegp Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! With raise & lower valve Vehicle stability system Wheels and Tires 6x 385/65 R22.5", manufacturer’s choice 6x steel rims, manufacturer’s choice Electrics 24 volt, multi-chamber lights, side-mounted yellow LED lighting 2 white front position lights 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed part, nominal width 48 mm. (without hose connection) Actuation hydraulically via truck PTO Body / Tip Body Aluminium box body, high-quality abrasion-resistant material Sloped front wall, 5 mm thick, with external cylinder mount Side walls made of 30-mm hollow-chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Internal access on front wall (not in combination with Cramaro). Shovel and broom holder on outside of front wall Greenline – conical, aerodynamic box shape "Membrane" tailgate Tailgate: pendulum door with double-joint hinge, externally mounted, double hook lock Tailgate with rubber seal Note: Heat-resistant up to 170°C max! Floor: continuous 5 mm, Brinell 110 Note: Only suitable for transporting sand, chippings and gravel, max grain up to 20 mm! All other goods excluded from warranty! Operating Notes For transport of salt, lime, etc., we recommend a tipping cylinder with hard chrome-plated piston rod to avoid corrosion and pitting. The stated gross weight is technically feasible; depending on load, the actual gross weight may not be achievable within the legal axle, support, and fifth-wheel loads. (Improper load distribution may impair driving and tracking behavior) Paint Finish Frame: DB 7350 Novagrey "10-year warranty against corrosion" Landing gear: black coated Body: natural aluminium Roller tarp: RAL 7035 light grey

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r19,5, tire condition: 100 %, Further information: Fine-grained steel welded construction, drawbar with 2 replaceable kingpins, 14 pairs of lashing eyes recessed in the outer frame, each with a capacity of 2.5 tons, outer frame with Load-Lock profile for attaching lashing straps. Note: Not suitable for use with sideboards! 24-ton, two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation. 2-stage extension ladder at the rear, door retainer on the side, chocks with holder, aluminum side impact protection, galvanized steel underrun protection, partial wheel arches in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, spare wheel holder for 1 spare wheel, with wheel fastening kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, vehicle stability system, tire pressure monitoring system TPMS Haldex, in conjunction with the info center. 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole tamper-proof sockets at the front, without connecting cable, LED safelight, at the top in corner posts at the rear. Floor: Sieve-printed panels approx. 30 mm thick, cross members with omega inserts, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,600 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Pjdpskyrlzefx Am Tsgp Side rails: 5 pieces of sliding rails that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket (3 x on the right side and 2 x on the left side), 5 pieces of rail positions (3 x on the right side and 2 x on the left side), aluminum insertion strips. Corner posts at the rear: steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-wing with 2 internal rotary latch locks each. Tarpaulin with welded-in horizontal and vertical straps, reinforcements for side rails. Quick Lock system for side tarpaulin with central lock, on one side on the left, tensioning devices made of stainless steel on the right, tarpaulin with recessed vertical slats as a load securing tarpaulin, on one side on the left (then only 2 pairs of side rails on the left). Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with the tarpaulin sliding from the back to the front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, liftable roof, mechanically liftable by approx. 380 mm, liftable roof for opening with the doors closed. Country of registration: Germany, type approval according to EG 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, refl

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: black, Attention: The pictures shown are archive images. The vehicle may still be in operation! Chassis Fine-grain steel welded chassis with lightweight design, equipped with a replaceable 2" kingpin. Slightly angled outer frame with Load-Lock profile for load strap attachment. Note: When sideboards are fitted, they must be opened before straps can be attached. Not usable in the gooseneck area. Additional 10 pairs of recessed lashing rings, each rated at 2.5 t. 24-tonne two-speed landing gear with single-side operation and straight foot, without compensating mechanism. Foldable front support legs, extendable and foldable outward in front of the headboard; positioned as far inward as possible during transport. Rear access ladder, side-mounted door retainers, wheel chocks with holders, aluminium side underrun protection, galvanized steel rear underrun protection, quarter fenders in front of the first axle and behind each axle, anti-spray mudflaps behind each axle, rear impact protection with Heavy Blocker cross beam, heavy-duty pallet stop on both sides (approx. 20–25 mm high) with lashing points every 200 mm. Loading height reduced by approx. 20–25 mm. Plastic toolbox. Axles & Suspension SAF disc brake axles with air suspension, without lift axle. Braking System Dual-line air brake system with spring parking brake. Two colour-coded coupling heads at the front without connecting lines. Electronic Braking System (EBS) with front EBS socket (without connecting cable). Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. Equipped with raise/lower valve and Vehicle Stability System (RSS). Electrical System 24 V electrical system with multi-chamber lights, yellow LED side marker lights, two white LED front position lights, two red/white rear outline marker lights, and 2 × 7-pin plus 1 × 15-pin front sockets (without connecting cables). Floor Steel front floor section with anti-slip coating. Approx. 30 mm phenolic plywood floor, Omega-reinforced cross joints, longitudinal support beams for high point loading, suitable for forklift axle loads up to 7,100 kg. Steel chequer plate flooring in the wheel area. Front Wall Front bulkhead approx. 2,580 mm high with steel corner posts in volume design. Front curtain release mechanism. Internal steel impact protection up to approx. 140 mm height. Sliding Posts Three pairs of full-length sliding posts with four socket positions and extended lower pockets. Three post positions with aluminium side slats. Rear Frame Steel rear corner posts extending to roof level, curtain tensioning system with round tube and ratchet. Double rear portal doors with two internal locking rods per door. Curtain PVC curtain with welded horizontal and vertical reinforcement straps, stainless steel tension buckles, and customer branding on the rear portal. Roof Sliding roof with rear end-lift, opening from rear to front. L-roof beams suitable for automotive logistics. Internal roof width approx. 2,490 mm. White roof curtain. EcoLift lifting roof, adjustable by approx. 380 mm with gas strut assistance. Anti-Ice System with centrally positioned hose and automatic ventilation. Registration & Certification Pgodpfx Amskyrlws Tjp Approved for registration in Germany, type-approved according to EC Directive 2007/46. EN 12642 XL load securing certificate (valid only with four rows of aluminium side slats), additional DC 9.5 certificate

Condition: used, machine/vehicle number: WFDFLT23861001990, empty load weight: 45,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total length: 9,800 mm, total width: 2,550 mm, suspension: air, tire size: 265/70 r19,5, tire condition: 100 %, color: red, Additional information: Former trade fair vehicle from 2006 – was used internally and therefore shows signs of wear! Side impact protection: Aluminum, from kingpin to the beginning of the side impact protection, 2,600 mm Under-run protection: Frame color, set as flush as possible with the end of the chassis and as far inward as possible Wheel chocks: 2 pieces with holder Ramp bumpers: 2 steel bumpers Paint: Sandblasted base, 2-component acrylic paint Rims: Factory silver Pgodpfji Ri Hysx Am Tsp Inspection: Includes DEKRA inspection

Condition: used, maximum load weight: 28,550 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2020, loading space length: 7,300 mm, loading space width: 2,200 mm, loading space height: 1,300 mm, loading space volume: 24 m³, Year of construction: 2020, Equipment: ABS, Air suspension, lift axle, BPW disc brakes, EBS, PVC half-shell mudguards, central drop-down support leg, aluminium rims, foldable underrun protection, thermal insulation, raised rear wall, catwalk with ladder, PVC rear tarpaulin, PVC roller tarpaulin Pgedpfey Dy Agox Am Tep

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, total length: 13,990 mm, total width: 2,550 mm, tire size: 385 / 65 r 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, forwarding company Steel welded construction in reinforced design, only 2 longitudinal beams as double T-beams with steel/diamond plate between the longitudinal beams, kingpin plate with 2 interchangeable kingpins. Mudguard for taillights. 1 steel storage box, recessed between longitudinal beams 8 pairs of lashing eyes screwed or welded to the frame, as per manufacturer's choice 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-shell mudguards with anti-splash flaps according to EG 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 8 pieces of timber rack brackets, as per manufacturer's choice, screwed to the frame with 2 extendable timber racks each, from 1800 to 2800 mm, 7 tons per pair Axles + Suspension SAF disc brake axles with 430 mm disc diameter Air suspension with lifting and lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Offset axle spacing mm (combined transport) up to 44 tons total weight Wheels and tires 385 / 65 R 22.5 as per manufacturer's choice Steel rims, factory silver Braking system 2-line pneumatic braking system Spring-loaded parking brake Pgsdpfxsi Rivwj Am Top Axle load detection via EBS-Canbus signal, for display on the screen in the driver's cab, the truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connection cable Front panel/corner posts at the front Steel/lattice front panel, approx. 2,300 mm high, screwed to the frame Approval / Signs Country of approval: Germany Type approval according to EG 2007/46 prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Support feet black coated Front panel hot-dip galvanized Note: Archive images! Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame Podpji Riw Asfx Am Togp 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions Psdpfx Amei Ri Ido Tsgp For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis, Semi-Trailer, Tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones With anti-splash flaps, only on the last axle 1 tarpaulin rod with bracket 2 towing hooks at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle – Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer’s choice Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the tractor unit’s display, via EBS, without installation in the truck (this must be available in the truck. Only on base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pin tamper-proof sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck auxiliary drive Tipping Body Aluminum box tipper body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with outer wall made of 30 mm hollow chamber profiles, neatly welded, with top edge profile that prevents material from spilling out. Inside with access ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline – tapered and aerodynamic tipper body design Membrane – rear wall Rear wall with double-joint hinge, mounted to allow movement, with 2-part door division 1/2 to 1/2, at the top with a pivoting gantry, with one grain slide per door. Pgedpfx Aji Ri Ihom Tsp Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor consistently 6 mm thick Standing platform with access ladder, connection plate for air/electrical and brake with large clearance for best possible operation. Roller cover, single-sided for depositing on the right-hand side, with central locking on the left-hand side Approval Country/Signage Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagra

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3,950 kg, maximum load weight: 31,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,930 mm, suspension: air, tire size: 385/65r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information: Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled with load, in the uncoupled state, the vehicle must stand at an angle towards the rear. 2 chock blocks + holder Underrun protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones with anti-splash flaps on the last axle 1 tarpaulin rod + holder 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, incl. forced lowering and start-up assist, operated 3x by braking (start-up assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: Trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! with lifting and lowering valve Vehicle driving stability system Automatic tilting lowering with shut-off valve Wheels & tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system Pgsdpfx Amei Ri R Is Tep 24 Volt multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part NW 48 mm. Actuation via truck auxiliary drive Tipping body Aluminum box body, sloping front wall 5 mm thick, 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents bulk material from spilling. Inside with ladder on the front wall. Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipping body shape Membrane - rear wall Rear wall as a hinged flap with double hinge, externally mounted with a double hook lock. Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for storage on the right, with central locking on the left. Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod, so that it is not attacked by the material and does not rust. The stated total weight is technically possible, but depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of approval/signage Germany Type approval according to EC 2007/46 24/7 service hotline prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the sides and red at the

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented without support leg Wheel chocks + holder Underrun protection, foldable Semi-shell fenders integrated fender holder, surface resistant to stone chipping Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, incl. forced lowering and starting assist, actuated by 3x brakes (starting assist functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable with lifting and lowering valve Vehicle driving stability system Wheels & tires 385/65 R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw connection, fixed part, NW 48 mm. Actuation via hydraulic system connected to the truck's auxiliary drive Tippers Sloping front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with upper edge profile to prevent material spillage. Inside with a ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Podpfx Amoi Ri H Ss Tegp Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, externally supported with a double hook lock. Rear wall with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with max. grain size up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with ladder, connection plate for air/electric and brake with large clearance for best possible operation. Rollover tarpaulin, one-sided for laying down on the right-hand side, with central locking on the left-hand side Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod to protect against rust The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior due to incorrect load distribution possible) Country of approval/ Signage Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Tipper body R

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,350 kg, maximum load weight: 33,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,650 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis, semi-trailer tipper Fine-grained steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards. Wedge blocks with holder Rear underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck). Only on standard tires. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal ("flashing side lights") 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a hinged flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with lever locks on the lower side. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of registration / signs Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Psdpfx Amsi Ri Dpj Togp Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs galvanized Body RAL desired color, solid color Roller cover RAL 7035 light gray

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total length: 9,090 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Psdpfxji Rivdo Am Tjgp More information Chassis, saddle, and tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 king pin Curved front panel, patented 24 tons, 2-stage support winch, single-sided operation, with straight lower part, without extension compensation Chocks with holder Rear underrun protection, foldable Semi-shell mudguards Integrated mudguard holder, surface designed to repel stones With anti-splash flaps, only on the last axle Tarpaulin rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, color-coded lines for easy service Spring-loaded parking brake 2 fail-safe coupling heads in the front, without connection line EBS, electronic brake system with EBS socket in the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets in the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump body Steel round dump body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Inside with access ladder on the front wall. Greenline - conical and aerodynamic dump body shape Shovel and broom holder on the outside of the front wall Membrane - rear wall Rear wall as a pivoting flap with double-hinge hinge, externally mounted with double hook lock. 2 clamping screws with toggle closures on the lower side. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with access ladder, connection plate for air/electrical and brake connections with ample space for the best possible operation. Rollover cover on one side for storage on the right-hand side, with central locking on the left-hand side Country of registration/plates Germany Type approval according to EC 2007/46 Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust-through" Support legs, black coated Dump body, RAL color of your choice, single color Rollover cover,

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65R22,5², tire condition: 100 %, Customized transport solution Configure according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Chassis Fine-grained steel welded construction, lightweight design, kingpin plate with 2 interchangeable kingpins Curved front end, patented Telescopic support in the center, cannot be uncoupled while loaded, when uncoupled, the vehicle must be tilted backwards. 2 support wedges with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones With anti-spray flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering & start assist, activated 3 times by the brakes (start assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of ABS! Pgodpfei Ri H Ijx Am Tjp With lifting and lowering valve Vehicle stability system Automatic tilting lowering + shut-off valve Wheels + Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw collar, fixed part, NW 48 mm. Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front panel 5 mm thick, with external side panels made of 30 mm hollow section profiles, cleanly welded, with upper profile designed to prevent spillage. Inside with access ladder on the front panel. Shovel and broom holder on the outside of the front panel. Greenline - conical and aerodynamic tipper body design Membrane - rear wall Rear wall as a swing gate with double-hinge hinge, mounted externally with a double hook lock. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with access ladder, connection plate for air/electricity and brake with plenty of space for the best possible operation. Roller cover on one side for stowing on the right, with central locking on the left Operating instructions For transporting salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust. The stated total weight is technically possible; depending on the load, the total weight may not be reached while observing the permissible axle/support and kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Pgodpfx Aoi Ri A Iom Top Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end, patented 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Wheel chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarp rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm (without hose connection) Operation via truck auxiliary drive Body Steel side body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Shovel and broom holder on the outside of the front wall. Internal access ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Internal width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with 2-wing door, split 1/2 to 1/2, at the top with pivoting boom, each with a grain slide per door. Standing platform with access ladder, connection plate for air/electricity and brake with large space for optimal operation. Pjdpfsi Rizfjx Am Tjgp Roller cover on one side for placement on the right side, with central locking on the left side Country of approval/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL, single color, according to customer's choice Roller cover: RAL 7035 light gray

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 32,400 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 1,295 mm, total length: 12,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, saddle, container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Front locking mechanism on the tipper ram mounting bracket with lateral locking Tapered locking wedges, rear locking mechanism on a continuous pivot shaft with return spring Without subframe for self-supporting containers Container mounts: Locking crossmember, 2-fold for locking 1 x 30 ft or 1 x 40 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt lock. Optimal saddle load when transporting 30 ft and 40 ft containers. 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Hydraulics 100 low-pressure cylinder, max. 150 bar, with HDK screw connection, fixed part, NW 48 mm. (without hose connection) Operation hydraulically via truck auxiliary drive, included. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total weight Air suspension Braking system 170 2-line compressed air braking system Color-coded line routing for easy service. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be prepared accordingly Wheels and tires 385/65 R22.5, manufacturer at the manufacturer's choice Steel rims, factory silver Pgsdpfx Amei Riv Ee Top Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 Psdpfsi Rixksx Am Tjgp 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Pgsdpji Ri Eujfx Am Top Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,070 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space height: 990 mm, total length: 13,990 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with 2 interchangeable kingpins and 2 kingpin positions Container Mounts: Rear extension retracted: 1 x 20-foot or 1 x 30-foot, flush with rear Center telescopic stage 1, rear extension extended to stage 1: 2 x 20-foot or 1 x 40-foot, with or without gooseneck tunnel Center telescopic section, 2nd stage; rear extension extended, 2nd stage: 1 x 45-foot container with gooseneck tunnel and rear overhang Center telescopic section, 2nd stage; front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45-foot container with long gooseneck tunnel and beveled corners Center telescopic system as a telescoping central tube frame with bolt locking mechanism with rear height adjustment and foldable center supports for containers without tunnels Container guide at the front, plug-in and removable Plug-in adapter for front locking, to secure containers without tunnels from below, with mounting bracket when not in use Front extension mounted on rollers, manually extendable (for 45-foot containers with long tunnels) Rear extension mounted on rollers, with hand crank 24-metric-ton, 2-speed support jack, single-sided operation Extendable underrun protection for 45-foot containers Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist; operated by 3 brakes (start-up assist functions up to a 30% axle load exceedance and at speeds up to 25 km/h) Pgjdpfxoi Ri R So Am Top Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Spring-loaded parking brake Tele Control Axle relief for easy telescoping 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer’s choice Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) 2 white front position lights 2 white/red lane-departure warning lights at the rear 2 x 7-pin reverse-proof sockets at the front, without connecting cables Operating Instructions When transporting 45-foot containers with a short tunnel, with or without a front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16,500 mm will be exceeded! The underrun protection must be extended manually! A special permit pursuant to § 70 StVZo is required! Type Approval pursuant to EC Directive 2007/46

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions. Front locking on tipper ram mount with bilateral tapered wedges, rear locking on continuous swivel shaft with return spring. Container mounts: Pedpfsi Ri Avsx Am Togp Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container. Adjustment via central telescope as an interlocking central tube frame with bolt locking. 24 ton, 2-stage support jack, single-sided operation, with straight lower part, without thrust compensation. Free support foot angle or free swivel radius to the rear approx. 1850 mm. 2 chock blocks with holder. Half-shell mudguards with anti-splash flaps according to EC standards. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection) Actuation hydraulically via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser-aligned, reducing tire wear and fuel consumption. Axle spacing offset mm (combined transport) up to 44 tons total weight. Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load reduction for easy telescoping. 2 fail-safe coupling heads at the front, without connecting line. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve. Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab; the truck must be pre-equipped accordingly, no truck installation. Wheels and Tires 385/65 R22.5, manufacturer's choice. Steel rims, factory silver. Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole fail-safe sockets at the front, without connecting cable. Additional LED work light at the rear, switched via reversing light. Country of Approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single-line. Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Paintwork Frame DB 7350 Novagrau (dark gray) 10-year warranty against rust-through. Support legs, black coated. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year Pgjdoi Ri Exopfx Am Tep

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions Podoi Riv Nepfx Am Tsgp Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 chock blocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-elliptical fenders with anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with raise/lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal for display on the dashboard in the driver's cab; the truck must be appropriately prepared; no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: with certain tractor units, false diagnoses may occur, even if the function is working) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light Operating instructions Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with DEKRA approval and certificate (according to §13 EC - FGV) prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year guarantee against rust-through Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.