Used Mütek Mfp for sale (77)

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Fjdpfx Aschqxxjpwopg Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), functionality: fully functional, machine/vehicle number: C099J132558, number of ink cartridges: 4, paper weight (min.): 53 g/m², paper weight (max.): 360 g/m², total length: 880 mm, total width: 799 mm, total height: 1,230 mm, Ricoh Pro C5210S + Booklet Finisher SR5080 + Decurl Dnit DU5020 + Large Capacity Tray LCIT RT4020 + Color Controller E-24B Print documents at 80 pages per minute. Specification: Fjdpfx Apjyzrmrswspg Print/Copy Process: 4 drum dry electrostatic transfer system with internal transfer belt Fusing: Oil-less belt fusing method System Memory/RAM: 640 GB (320 GB x 2) Document Feeder: 220-Sheet ADF with single-pass color duplex scanning at up to 220 ipm Print Resolution: 1200 x 4800 dpi Scan Resolution: 600 dpi Scan Speed (B&W): 110 ipm (simplex) / 220 ipm (duplex) Max. Print Area: 323 mm x 480 mm Warm-Up Time: Less than120 seconds Output Speed: Pro C5200s: 65 ppm (FC/B&W) Pro C5210s: 80 ppm (FC/B&W) Paper Capacity: Tray 1: 1,250 x 2 Trays 2 – 3: 550 x 2 Bypass Tray: 250 sheets; Supports duplex Total Standard/ Max. Capacity: 3,850/ 8,250 sheets Paper Size: A6 to SRA3, Length up to 1,260 mm Paper Weight: Standard Trays: 52.3 - 300.0 gsm Bypass Tray (std): 52.3 - 360.0 gsm A4/LT Tray (opt): 52.3 - 216.0 gsm SRA3 Tray (opt): 52.3 - 300 gsm Max. Monthly Volume: 150,000 pages per month Max Power Consumption: Less than 2,400 W Dimensions (WxDxH): 799 x 880 x 1,230 mm (incl. ADF) Weight: Less than 262 kg The condition of the toners is as in the attached photos Counter: Total full color: 268,138 pages Total black and white: 45,337 pages Fiery E-24B Color Controller Specifications Controller Type: Embedded Type Fiery Plaform: Fiery FS200 CPU: Intel G1820 2.7 GHz Host Interface: 1000Base-T/100Base-TX/10Base-T Ethernet x 2 Memory: 2 GB Inrernal HDD: 500 GB Operating System: Linux Network Protocol: TCP/IP (IPv4/IPv6), SMB Printer Description: Adobe PostScript 3 (std.), PCL6/5c (std.) Max Print Resolution: 1200 x 4800 dpi Scan Resolution: Up to 600 dpi Fonts: PS3: 138 fonts/PCL: 80 AGFA fonts Operation Panel: Via touch panel display on the MFP Utilities: Standard: Command WorkStation 5, Fiery Scan, Printer Delete Utility, Fiery Web Tools, Fiery VUE, Secure Print Optional: Fiery Impose, Fiery Compose, Color Profiler Suite ES-2000, Productivity Package, Spot On, Hot Folders, Auto Trap Color Management Tools: ColorWise Calibration: ES-2000 (opt.) Power Requirements: 100–240 V/3.0A/50-60 Hz Max. Power Consumption: 180 W Dimensions (WxDxH) : 124.3 x 362.5 x 294.6 mm Weight: 5.5 kg

Condition: new, Year of construction: 2026, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg Fodpjb Nulhjfx Apwopg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Fjdpfeb Ny Eyox Apwopg Knives: 15 pieces, reversible multiple times Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Fpjdpfjwzarcsx Apwsg Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Fedpfx Aox Tfdhspwopg Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp Fpodpfoxbyx Tjx Apwsg

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay and bread. Throughput depends heavily on the sieve and source material: - up to a maximum of 350 kg / h for straw with a 15 mm sieve - up to 60 kg / h for EPS with a 15 mm sieve Motor 11 KW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Surcharge for the next larger machine with 18.5 kW and larger silo diameter + 1,995 € net stable steel construction, Fjdpfxszbizs Apwepg hardened cutting blades, sieve with interchangeable inserts, optional (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optional for plastic or Grain pipes, Blowing width approx. 12 m, Chassis with 2 wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Cover €290 each net Styrofoam disc: €600 each net

Condition: good (used), Good, used condition Main motor: 11 kW Maximum throughput: 200 kg/h Year of manufacture: 12/2008 / Technically tested: 01/2025 Briquettes: 150x60 mm . Fpodjt Hxudspfx Apweg *Used machine, purchased as is Functional guarantee upon delivery

Condition: as good as new (ex-display), Year of construction: 2024, Primary crusher Basic machine starting from € 29,950 net *Options against surcharge Ideal for pre-crushing bulky materials such as pallets, boards, beams, fruit crates, polystyrene, plastics and much more. For the production of wood chips, the primary crusher can also be installed directly above a single-shaft shredder Machine in pre-production * Special options available at extra cost Fodpofd Iciofx Apwjpg Your advantages: + Volume reduction of up to 70 + Significantly lower transportation costs + Low disposal costs + Production of fuel material + Also ideal upstream of a single-shaft shredder for the production of wood chips Weight: 1,200 kg Dimensions 2050x850x1600 mm Cutting unit opening 1300x700 mm *Optionally also available in 1600x700 mm (motor then 11 kW) (surcharge + 4.995 € net) Throughput: up to 50 pallets/pieces per hour *depending on material Motor: 7.5 kW Options: Industrial top hopper (closed on 3 sides) + € 4,950 net Extra emergency / off button + 495 € net 200 mm extension + 497 € net Requirements for the raw material: - Moisture content less than 30 % ATRO - The machine must be installed in accordance with CE guidelines or secured on site against access from below (into the cutting unit) - Pallets up to a dimension of 1200x800 mm can be processed Longer parts also work on edge

Condition: good (used), Technical data: Briquetting press RUF RB 440 Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Fpedpot H D Ezsfx Apwsg Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: good (used), Technical specifications: Fpjdpfswtdk Tjx Apwog Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Fpsdpfjdv Eu Hex Apwjg Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Fpedpe E Dqusfx Apwsg Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: like new (used), Year of construction: 2024, operating hours: 29 h, *one machine is ready for delivery and ready produced Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette sellers. Classic type - throughput up to 425 kg / h * depending on the material Options for an extra charge: Plant construction / mütek system technology: - mütek shredder MRZ shredding technology - conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - screw conveyors - silos - Control links of all kinds - semi-automatic packaging technology Press: - Packing table with drawer - Top-mounted silo with discharge Your advantages: Most important point: + Very established, well-engineered die press thanks to 25 years of experience. The difficulty and the know-how lies in the detail. For example, valves and cylinder seals of the highest quality. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics Technical data briquetting press: Throughput: up to 425 kg / h * * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material. If no test material is made available to us, we cannot make any statements about the briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Main hydraulic compressor Pressing pressure: up to approx. 1700 kg / cm² Hydraulic system with 260 liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 ph Manual operation of all cylinders "Dustproof" switch cabinet with PLC control and touch display Total power consumption of the briquette press: approx. 33 KW Muxzr8 Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% Fsdpfefhql Tjx Apwjpg - Maximum chip length: 20 x 2 x 2 mm - temperature where machine is placed + 8 degrees - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear.

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net Fedpfxsd Db N Is Apwepg * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: new, Year of construction: 2023, Length: approx. 2500 mm Width: approx. 400 mm Discharge height: approx. 1650 mm Weight: 290 kilograms Motor: 0.75 kW Fsdpfx Apev Srvvjwepg Ex works prices Shipping as per effort

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, with ash content below 1% ATRO Caution concerning: sand, stones, and mineral content - Material is compacted by pressing tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Optional upgrades available: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size-reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - All types of control system integration - Semi-automatic packaging solutions + 24h operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Achievable briquette density of up to ≥ 1 kg/l *Details after testing Functionality: The machine features a silo with agitator. Each of the four corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber. The machine operates with two cylinders, each pressing in both directions (either as the cylinder moves forward or backward). This produces four briquette outlets, each generating six individual briquettes. *Ideal for automatic feeding Fjdpofbb Arofx Apwjpg of the heating boiler Format: Ø 30 mm Throughput capacity: up to 310 kg/h maximum Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables fuel feeding of industrial firing plants via screw conveyor Fully automatic 24h operation possible High energy efficiency Briquettes/pellets with consistently high quality and density For automatic feeding into industrial combustion systems Small to medium quantities of wood chips generated in various processing industries (especially wood, biomass, etc.) can be efficiently compacted. The small Ø 30mm format represents an attractive alternative. Unlike our conventional briquettes, these can be fed automatically into industrial combustion systems. In addition to wood, a wide variety of other materials can also be processed without issue (various types of biomass and agricultural residues).

Year of construction: 2022, condition: new, Highlights of our two extraction systems Eco 3000 and Eco 5000 +Solid sheet metal construction ensures ideal flow conditions +resistant wind impeller Fpedpfx Apeidma Nowjg +constant extraction performance even under constant stress + Connection of up to a maximum of 3/4 machines possible using the supplied distributors +high suction power due to large filter surface (filter dimensions: ø500x1100mm) +Integrated driving device for easy manoeuvring Scope of delivery: Running gear, filter and chip bag, distributor (connection for 3/4xø100mm suction pipes), incl ---- Device available in two designs: *in the following marked with position 1) and 2) 1) Extraction system Eco 3000 - 1.5 kW * with a chip bag and an industrial polyester filter Motor power S1 in W 1500 Installation dimensions in mm 985x560x2250 Extraction capacity in m³/h: 3,000 Suction outlets 3x (ø100mm) Negative pressure in Pa: 2200 2) Extraction system Eco 5000 - 2.2 kW * with two chip bags and two industrial polyester filters Motor power S1 in W 2200 Installation dimensions in mm 1540x560x2270 Extraction capacity in m³/h: 5,000 Suction outlets 4x (ø100mm) Negative pressure in Pa: 2600 --- Information applies to both devices: Sound pressure level in dB(A) < 85 dB Voltage: 400V / 50Hz *Option: also available in 230 V Chip bag diameter in mm: 500 Chip bag length in mm: 850 Delivered in a box for self-assembly in a few steps The filters must be cleaned manually at regular intervals. Surcharge for suction with automatic cleaning + €4,700 net

Condition: excellent (used), Kyocera TASKalfa 4012i for sale. Print count: under 100k Good working condition. A3 monochrome multifunction laser printer (MFP) • Technology: laser • Color: monochrome (black & white) • Functions: print, copy, scan (optional fax) • Paper size: up to A3 Fpedpjyu Tc Tofx Apweg • Category: multifunction printer (MFP) • Use case: office / enterprise • Speed: TA4012i – 40 ppm For more information, please send a message.

Condition: like new (used), Canon IR Advance C5840i for sale. Print count: 38 k Good working condition. A3 color multifunction laser printer (MFP) series • Technology: laser • Color: color printing • Functions: print, copy, scan (optional fax) • Paper size: up to A3 • Category: multifunction printer (MFP) • Use case: office / enterprise • Speed variants: C5840i – 40 ppm Fsdpfx Ajyu S Unspwepg For more information, please send a message.

Condition: used, Canon IR Advance 525i for sale in good condition. Technology: laser Color: monochrome (black & white) Fodpfx Apsyu St Rjwspg Paper size: up to A4 Category: multifunction printer (MFP) Lifetime usage: 100,000–300,000 prints For more information please send a message

Condition: like new (used), DEMO - Canon DX4725i for sale. Fpjdpoyu R Efefx Apwsg Print count: under 20 K Good working condition. A3 monochrome multifunction laser printer (MFP) • Technology: laser • Color: monochrome printing • Functions: print, copy, scan, send (optional fax) • Paper size: up to A3 • Print speed: up to 25 ppm (A4) • Use case: office / enterprise • Category: multifunction printer (MFP)

Condition: like new (used), Canon DXC5735i for sale. Print count under 100k Good working condition. A3 color multifunction laser printer (MFP) • Technology: laser • Color: color printing • Functions: print, copy, scan (optional fax) • Paper size: up to A3 • Use case: office / enterprise • Category: multifunction printer (MFP) For more information, please send a message. Fedpfoyuyuvex Apwspg

Condition: excellent (used), Canon IR Advance C3520i / C3525i / C3530i / C3535i for sale. Print count: 200k–400k Good working condition. A3 color multifunction laser printer (MFP) series • Technology: laser • Color: color printing Fpjdpfx Ajyuyq Dspwjg • Functions: print, copy, scan (optional fax) • Paper size: up to A3 • Category: multifunction printer (MFP) • Use case: office / enterprise • Speed variants: C3520i – 20 ppm C3525i – 25 ppm C3530i – 30 ppm C3535i – 35 ppm For more information, please send a message.