Used Mütek Mfp for sale (85)

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dksdpfx Agechqxxsget Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Dkedpfsdubpuex Aggst Cross and ascending belt demonstrators from € 7,995 net

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force Dkedpfx Aoffh Atjgget - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net Dkjdpjgmfa Ajfx Aggjt (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: new, Year of construction: 2025, Another machine immediately available! Djdpjv Rpxljfx Aggokt Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, Dodpfx Aoh S H T Uoggskt hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet Djdpfx Agsgbkkrogekt --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Dedogfm Ryspfx Aggekt Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € Dkedpfochuvrox Aggjt - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics Djdpfx Aedv Eu Hsggokt - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: good (used), Clean air extraction system Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V Dedpfxsrb D Ne Aggokt

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay, and bread. Throughput is highly dependent on the screen and the input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Additional cost for the next larger machine with 18.5 kW and a larger silo diameter: + €2,750 net Robust steel construction, Dksdpezbizefx Agget hardened cutting blades, screen with interchangeable inserts, optionally with (10), 15, 22, 26, 30, 40, or 60 mm perforations For electric drive with star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge spout 150 mm, optionally for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels, Ø 380 mm, and one pivoting support wheel, Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) Weight approx. 240 kg, Spare part prices and options: 24 blades, hardened, €9.90 net each 6 bolts, €14.90 net each 1 screen, €475 net Cover, €290 net each Polystyrene disc: €600 net each

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Dedsff Sbispfx Aggjkt Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Dkjdpfx Agex Tfdhogjt Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. Dedpfx Agod Nm Siegokt - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: reconditioned (used), Year of construction: 2023, All wear parts are new. Only 704 operating hours. Special price for a lightly used demonstration unit. Base machine: €29,990 net. Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable, cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality during continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Dedsd N Dnhjpfx Aggekt Hydraulic pre-compaction via sliding plate. Main press cylinder. Vertical cylinder. . Level sensor: yes. . Requirements for the raw material: - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg. - The feed material must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Dedpfstqfhxox Aggskt Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: as good as new (ex-display), Year of construction: 2024, Special machine for shredding plastics Base machine from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc. - Semi-rigid thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded blades (reduced load absorption), - Small cutting gap between blade and counter-blade Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control: PLC Cutting unit opening (top) 600 x 800 mm The parts should be a maximum of approx. 500x500 mm *the height is less relevant Hydraulically operated slide Screen size as required (25 - 40mm) For plastics, coarser screens are recommended (30-40 mm) *If you want to shred finer, a two-stage shredding process with a downstream granulator type MVZ (screens 5-15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Further options available at an extra charge: - Raise shredder by approx. 25 cm (preparation for conveyor belt removal) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Alternatively, manual start and stop on the conveyor belt + €595 net Requirements for the raw material: - The moisture content (as received) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. It is also possible for you to send us your material by freight forwarder, and we will document the test with photos and videos. --- Dodpfx Agsd H R Sxegskt *only for brittle plastics with medium hardness, *not for elastic or extremely hard and heavy plastics - this would affect the durability of the system. --- Optionally, the next larger machines would be available: Base machine: Shredder MGZ 830 K-S - 18.5 kW Cutting unit opening (top) 800 x 1,000 mm The parts should be a maximum of approx. 720x700 mm *the height is less relevant from €39,995 net * Options depending on effort Base machine: Shredder MGZ 1030 K-S - 22 kW Cutting unit opening (top) 1,000 x 1,000 mm The parts should be a maximum of approx. 900x700 mm *the height is less relevant from €49,975 net * Options depending on effort Base machine: Shredder MGZ 1330 K-S - 37 kW Cutting unit opening (top) 1,300 x 1,200 mm The parts should be a maximum of approx. 1,200x700 mm *the height is less relevant from €79,975 net * Options depending on effort

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Dsdpfjwzarcjx Aggokt Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: used, Conveyor belt, belt conveyor, belt feeder, band conveyor MFP Fördertechnik Year of manufacture: approx. 2015 Usable length: 2500 mm Belt width: 250 mm Belt length: approx. 5200 mm Frame profile height: 50 mm Return roller diameter: 20 mm Belt speed: approx. 5 m/min to 40 m/min Conveyor belt height: approx. 1000 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz - Stepless belt speed adjustment via potentiometer on ROFRE frequency converter, type 897 - Reversible operation (forward/reverse) - Belt drive by INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate underneath the conveyor belt - 1 piece height-adjustable HAACON base with hand crank, conveyor height approx. 1000 to 1200 mm - HAACON base mounted on steel plate: length 500 mm x width 450 mm x thickness 20 mm - 1 piece fixed support foot without height adjustment as a transport support - Fully mobile on swivel castors Overall dimensions (L x W x H): 2570 x 400 x 1050 mm Dedpfxoxf Uqlo Aggskt Weight: 115 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Xerox AltaLink C8255 MFP’ photocopier Item for sale: Dkjdpfx Agozb Akyegot 1x Xerox AltaLink C8255 MFP Meter readings: Total black: approx. 1,795 prints Total colour: approx. 3,634 prints Total: approx. 5,429 prints Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: excellent (used), functionality: fully functional, overall weight: 154 kg, input voltage: 220 V, total width: 660 mm, total length: 1,500 mm, total height: 1,310 mm, HP DesignJet XL 3600 MFP - Total meter reading: 23,105 m2 - Includes Calibration Sheet - All-in-One model - Includes PostScript option Very high productivity thanks to fast first print and high print speed. 📐 Ideal for CAD, GIS, and architectural drawings, with sharp lines and accurate colors. 📄 Automatic roll feed with integrated catch tray for prints. Djdpfxjzpyfis Aggekt 📱 Direct printing from USB, network, email, and mobile devices. 🖥️ 15-inch touchscreen for easy operation. 🔒 Comprehensive security, including encrypted storage and network security. 📦 Suitable for large print volumes, making it popular with repro departments and technical drawing offices. This machine has been inspected and thoroughly tested by our own specialized technical service. If you would like any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 14800061, counter reading (black): 652, With this offer, you are purchasing a used “KIP 660 MFP” color production system Item for sale: 1x KIP 660 MFP We can easily configure the machine to your specifications. Feel free to contact us! Counter readings: Total: Approx. 652 pages Black: Approx. 652 pages Color: 0 pages Condition: This listing is for a used device that may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Dkedpfx Agjzmpaqsget Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you before shipping or pickup. For more information, please feel free to contact us directly.

Condition: excellent (used), Control : Siemens Sinumerik 840D SL Accessories available: - various grinding wheel holders - Lifting pump for cooling lubricant - Various spare parts for machine, machine documents - Magnetic table 2000 x 250 mm incl. clamping hydraulics - Machine hours: 8,000 h (since 2018) - Table dresser: Dittel brand - Grinding head: manually swiveling Machine length 6.6 m Width 2.8 m Djdpfxjulghce Aggjkt Height 2.5 m Weight 14'000 kg Drives Siemens

Condition: used, Surface grinder MÄGERLE MFP-125-35 Dkodpfx Agey Tzcmjgot