Used Mütek Mfp for sale (83)

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically Hsdpfxsd Nnwle Aazou * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio Hedpofci D Asfx Aazsu + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) ---

Condition: used, Year of construction: 2019, heating capacity 12 kW Temperature range 30 - 90 °C Dimensions (L/W/H) 1.300 x 700 x 600 mm Max. filling weight wire mesh box 800 kg Number of working hours ca. 100 h dimensions 1,5 x 1,5 x 1,5 m weight 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Hedozbvhfopfx Aazou

Condition: good (used), functionality: fully functional, The Z-conveyor belt from MFP, featuring timed operation, is for sale. Hjdpfxezu Iv Te Aazsu Specifications: Width: 1400 mm, with hopper, 150 mm, along the entire length Inclined belt: 1400 mm Discharge belt: 550 mm Belt speed: 3 m/min With timed operation Mobile New belt with 30 mm high cleats, spaced 330 mm apart.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 6861-0024, workpiece weight (max.): 250 kg, grinding length: 500 mm, grinding wheel diameter: 300 mm, total width: 4,600 mm, total length: 4,650 mm, total height: 3,580 mm, type of input current: three-phase, spindle speed (max.): 12,000 rpm, feed length X-axis: 500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 650 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, grinding spindle motor power: 50,000 W, grinding spindle speed: 12,000 rpm, overall weight: 9,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, input voltage: 400 V, space requirement height: 3,580 mm, MFG: Magerle (United Grinding) Model: MFP51 (MFP-51-50.65.65) Linear Axes Max X Travel = 500 mm Max X Travel Speed = 50000 mm / min Max Y Travel = 650 mm Max Y Travel Speed = 30000 mm / min Max Z Travel = 650 mm Max Z Travel Speed = 30000 mm / min Hedpfx Aaszwugdozeu Spindle Max. spindle power = 50 kW Max. speed = 12000 RPM Max. grinding wheel diameter = 300 mm Max. grinding wheel width = 60 mm Swivel Axles Swivel Range A = 210° Swivel Range B = 360° Swivel Range C = 360° Automatic 68-position tool change magazine portal magazine with inspection window and electromechanically interlocked loading station for manual loading of the tools. Ready to ship from Bangkok, Thailand

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% Hodsx Af Rdjpfx Aazou - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: good (used), functionality: fully functional, The conveyor belt from MFP is for sale; here are some technical details: The conveyor belt has been newly installed and comes with an FDA certificate. The guide rails are made of stainless steel. The entire interior is fitted with a strip, making it well-suited for small parts. Rise: 450 mm Incline length: 2300 mm Working width: 180 mm Cleats: 30 mm high, spaced 300 mm apart Overall width: 340 mm Mobile Hjdpfx Aajzlxifszou Belt speed: constant 16 m/min, but can be equipped with a frequency converter for approximately €480.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand large-format system/plotter, the “Oce ColorWave 3500” Item for sale: 1 x Oce ColorWave 3500 Meter readings: Total: Approx. 1,850 m² Hjdpjzvpl Sjfx Aazsu Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: reconditioned (used), Year of construction: 2023, Special price for a machine with low usage Base machine: €29,990 net Options available at an extra charge: Hedsd N Dnhspfx Aazou - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level sensor: yes . Requirements for the raw material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on the agitator: 150 kg - The feed must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: used, functionality: fully functional, The two angle conveyors from MFP are for sale. One conveyor has a new belt and comes with an EU declaration of conformity, CeNit 3642A, and costs €1300. Hedpfsziuppox Aazju Specifications: Feed height: 600 mm Inclined belt length: 1000 mm Usable belt width: 200 mm Belt speed: 3 m/min Mobile

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, Hjdpoh S H T Uefx Aazju all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Condition: used, functionality: fully functional, The angle conveyor from MFP is for sale: Conveyor length: 400 mm Inclined belt: 1000 mm Usable width: 250 mm Overall width: 450 mm Discharge height: 950 mm Belt speed: 4 m/min Mobile Hopper made of stainless steel, 150 mm high Cleats: 30 mm high, spaced 300 mm apart Hjdpjzgwqqefx Aazou Includes a hopper made of stainless steel.

Condition: excellent (used), functionality: fully functional, overall weight: 154 kg, input voltage: 220 V, total width: 660 mm, total length: 1,500 mm, total height: 1,310 mm, HP DesignJet XL 3600 MFP - Total meter reading: 23,105 m2 - Includes Calibration Sheet - All-in-One model - Includes PostScript option Very high productivity thanks to fast first print and high print speed. Hodpfezpyfiox Aazeu 📐 Ideal for CAD, GIS, and architectural drawings, with sharp lines and accurate colors. 📄 Automatic roll feed with integrated catch tray for prints. 📱 Direct printing from USB, network, email, and mobile devices. 🖥️ 15-inch touchscreen for easy operation. 🔒 Comprehensive security, including encrypted storage and network security. 📦 Suitable for large print volumes, making it popular with repro departments and technical drawing offices. This machine has been inspected and thoroughly tested by our own specialized technical service. If you would like any further information, please do not hesitate to contact us. Worldwide shipping is possible.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. Hsdpfxogmfa Ao Aazju We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Hodpfx Aaov Rpxljzsu Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This machine is ideal for shredding bulky, lightweight aluminum chips or turning chips. Not suitable for heavier aluminum parts. Included: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Hjdpfegmh H Tsx Aazou Knives: 40x40mm, multi-rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting mechanism opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen size selectable (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,990 net - Inclined conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Xerox AltaLink C8255 MFP’ photocopier Item for sale: 1x Xerox AltaLink C8255 MFP Meter readings: Total black: approx. 1,795 prints Total colour: approx. 3,634 prints Hsdpfszb Akyex Aazeu Total: approx. 5,429 prints Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: used, functionality: fully functional, type of input current: AC, input voltage: 220 V, total width: 216 mm, total length: 76 mm, total height: 127 mm, number of ink cartridges: 4, paper weight (min.): 45 g/m², paper weight (max.): 220 g/m², paper width (max.): 585 mm, color channels: 4, paper height (max.): 710 mm, resolution (max.): 1,200 dpi, space requirement height: 356 mm, Equipment: auto duplex, !!New price!! We offer in very good condition three models of multifunction devices (printer, copier, scanner): HP Color LaserJet Managed MFP E87750dn + tray 2000 sheets – (counter around 200k) – 210 euro - 50 pieces Hodpfxszqmuto Aazsu HP Color LaserJet Managed Flow MFP E67660Z + tray – (counter around 100k) – 150 euro - 80 pieces HP LaserJet Managed MFP E62655dn + tray – (counter around 100k) – 120 euro - 120 pieces The devices are fully functional. Live photos will be available in mid-September, and pickup will also be available in September. *For larger quantities, the price is negotiable.

Condition: used, Surface grinder MÄGERLE MFP-125-35 Hodsy Tzcmspfx Aazsu

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: Hjdjtqfhxopfx Aazeu When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Hodpfx Asff Sbioazju Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Hjdpfx Aaed Su Hxszeu Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Hsdpfxjx Tfdho Aazsu Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: used, Conveyor belt, belt conveyor, belt feeder, band conveyor MFP Fördertechnik Year of manufacture: approx. 2015 Usable length: 2500 mm Belt width: 250 mm Belt length: approx. 5200 mm Frame profile height: 50 mm Return roller diameter: 20 mm Belt speed: approx. 5 m/min to 40 m/min Conveyor belt height: approx. 1000 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz - Stepless belt speed adjustment via potentiometer on ROFRE frequency converter, type 897 - Reversible operation (forward/reverse) - Belt drive by INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate underneath the conveyor belt - 1 piece height-adjustable HAACON base with hand crank, conveyor height approx. 1000 to 1200 mm - HAACON base mounted on steel plate: length 500 mm x width 450 mm x thickness 20 mm Hodoxf Uqljpfx Aazsu - 1 piece fixed support foot without height adjustment as a transport support - Fully mobile on swivel castors Overall dimensions (L x W x H): 2570 x 400 x 1050 mm Weight: 115 kg

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Hedpfx Aev Sqrpsazju Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.