Used Eppendorf Xplorer Plus E for sale (71,650)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Credpfx Acjyzy S Aj Neb Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Codsy Iyu Djpfx Ac Njrb We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Crsdox Hf A Rjpfx Ac Nob Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Condition: used, This listing is for the 3M Zeta Plus Cjdpfsyq Ryuox Ac Nerb

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm Codpfx Acoub Amle Nsrb - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: used, Year of construction: 2010, functionality: fully functional, controller manufacturer: Cybelec, controller model: DNC 880S, working width: 3,100 mm, bending force (max.): 160 t, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Neat Deratech press brake with a capacity of 160 tons and a bending length of 3 meters. Equipped with a Cybelec CNC control, CNC X-axis, R-axis, and two backgauge fingers that can be manually adjusted sideways. Hydraulic crowning. The seals of the hydraulic crowning system have been recently renewed. Crodpfx Aoyxxn Dec Neb

Condition: good (used), Year of construction: 1996, Description: For sale is a Gildemeister NEF Plus 710 lathe, year of manufacture 1996, in operational condition and ready for immediate use. The machine has been regularly maintained and is in good condition. Ideally suited for precision turning of metal and plastic components. General technical specifications of the Gildemeister NEF Plus 710 (Year: 1996) Technical Data: Machine type: CNC lathe Model: NEF Plus 710 Year of manufacture: 1996 Control: Siemens 810T (or comparable) Workpiece diameter: max. 710 mm Turning diameter: max. 710 mm Turning length (range): up to approx. 1000 mm Spindle speed: 30 – 2,500 rpm Drive power: 15–22 kW (depending on version) Spindle mount: A2-6 Cooling: Integrated coolant system Included: Tool holder (VDI), standard equipment Special Features: Operational condition: The machine is fully functional and ready for use. Location: Collection in Langenfeld (NRW), Germany. Price: €13,500 plus VAT. Crodpfxoygdgao Ac Neb The lathe is perfectly suited for all types of CNC turning applications and offers excellent cost-effectiveness for workshops and manufacturing companies. Contact: Please send a message for further information or to arrange a viewing appointment. Important information: All information is subject to change, prior sale, errors, and availability. Technical data and all provided information are non-binding and for guidance only. Contact: If interested or to arrange a viewing, please send a message or schedule an appointment. Disclaimer: The item is sold as described. Returns, guarantee, and warranty are excluded. The buyer agrees that the item is purchased "as seen" and without any right of return. No liability is accepted for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above terms and conditions.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,310 h, construction height: 3,270 mm, empty load weight: 9,450 kg, total length: 5,274 mm, construction width: 2,620 mm, Tractor Cedpfx Aswlxgmec Nerb Speed category: 50 Technical condition: good Battery condition: good

Condition: new, Year of construction: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm Cjdpofx U D Ajfx Ac Norb - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, mileage: 8,900 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 05/2025, next inspection (TÜV): 01/2028, fuel consumption (urban): 7.4 l/100km, fuel consumption (extra-urban): 7.4 l/100km, fuel consumption (combined): 7.4 l/100km, CO₂ emissions: 194 g/km, emission class: euro6, color: silver, suspension: steel, number of seats: 6, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, VR9 STYLE, E07 hill start assist, E2Q MBUX Augmented Reality for navigation, E7H MBUX Multimedia System High, T56 electric operation for left sliding door, T55 electric operation for right sliding door, JB7 Park Package with reversing camera, Q50 trailer coupling with removable ball head, EY5 Mercedes-Benz emergency call system, BS1 brake calipers with Mercedes-Benz lettering, EY6 breakdown management, B25 electric parking brake, EI0 wireless charging system for mobile devices, LG4 tail, brake, and indicator lights in LED technology, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 driver's seat lumbar support, SE4 passenger seat lumbar support, T70 child safety locks on passenger compartment doors, ZC6 sales code 1, T74 entry grab handle, Y10 first aid kit, MJ8 ECO start-stop function, IB6 model series C447 Vito/V-Class, 805 AEJ X4/1, VL2 velour floor mats, H00 warm air duct to passenger compartment, C6L multifunction steering wheel, Z42 registered as a passenger car, C74 illuminated Mercedes-Benz entry badge, J55 seat belt warning device for passenger seat, XA8 weight variant 3,100 kg, EL9 2-way speakers front and rear, SH2 thorax-pelvis sidebag passenger, SH1 thorax-pelvis sidebag driver, SH8 windowbags for driver, passenger and in rear, H20 all-round heat-insulating glass, JW8 ATTENTION ASSIST, Y44 warning triangle, RG7 225/55 R17 tyres, JX2 40,000 km maintenance interval, FP3 mirror package, BH1 HOLD function, WA8 control code factory 157, SZ8 storage net on passenger seat backrest, SZ7 storage net on driver's seat backrest, JH3 communication module (LTE) for digital services, X30 registration. We will gladly provide you with an individual financing or leasing offer and accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition according to age/mileage; partial repainting was performed during vehicle preparation. No liability for printing or typographical errors. Errors and prior sale excepted. ... more on our homepage Codpjx S D Hljfx Ac Norb

Condition: new, Year of construction: 2024, functionality: fully functional, NEW MACHINE! CNC SCM Startech CN PLUS ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces Credoip Dh Iopfx Ac Nsb - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: - 8x vertical drilling spindles - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter MOULDER TECH. DATA - Motor power: 5,5 KW - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm

Condition: used, mileage: 102,800 km, power: 103 kW (140.04 HP), first registration: 03/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,391 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,675 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special Equipment: Storage Package 2, Composition Colour audio system (radio / SD card interface / USB), electrically adjustable and heated exterior mirrors, wooden floor covering in cargo area, manual diesel particulate filter regeneration, driver assistance system: front and rear parking sensors, chassis: reinforced dampers and stabilizers front and rear, cab floor mats: rubber, vehicle without model designation, emergency call system, digital radio reception (DAB+), spare wheel with original tires including on-board tools and jack, rearview camera, heated washer nozzles and wash fluid level indicator, seat upholstery: heavy-duty seat covers, cab seats: double passenger seat with storage compartment, cab seats: ErgoComfort suspension seat, driver side (20-way seat adjustment), rear step integrated in bumper, reinforced front left door hinges, high wooden cladding in cargo/body area, lashing rails in cargo area – mounted on side walls. Credpfx Acoxq I Inj Njb Additional Equipment: Driver’s airbag, convex exterior mirror left, convex exterior mirror right, LED indicator lights integrated into exterior mirrors, cab floor covering: rubber, drag coefficient underbody paneling, double headlights, twin-tone horn, entry handle on rear left pillar, entry handle on rear right pillar, driver assistance system: hill start assist, driver assistance system: brake assist (HBA), driver assistance system: crosswind assist, electric front windows, laminated windshield, folding remote control keys (2), A-pillar grab handles, rear wing doors without windows, interior lighting in cab: LED, interior lighting in cargo/body area: LED, high-roof box body with rear overhang, body variant: high roof in body color, fuel tank: 75 liters, radiator grille with upper chrome strip, full-height cargo partition wall without window, adjustable steering column (steering wheel), headlight leveling, truck registration, side marker lights, engine 2.0 liter – 103 kW TDI, Multifunction Display Plus, rear fog lamp, wheelbase 4,490 mm, tire repair kit, low emissions per Euro 6d standard, hinges for rear doors with increased opening angle, sliding door on right side of cargo/passenger area, SCR system (AdBlue technology), electro-mechanical power steering, engine start/stop system, 12V power sockets in cab (2 units), front bumper in gray, cargo area lashing eyes, seatbelt warning system (driver/passenger side), heat-insulating glazing, central locking with remote control and interior operation, permissible gross weight 3.50 t Subject to prior sale – all information provided is non-binding. The accuracy and freedom from errors of the information given here cannot be guaranteed. Warranty and/or liability is excluded. Deviations from the above description cannot be ruled out. We point out that the object of any purchase agreement that may be concluded will solely be the vehicle in its actual condition.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Cjdpfx Ajym U E Hec Nerb Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Cedpfxexzq Nco Ac Norb Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: ready for operation (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 532 Bale weight depending on material: up to 550 kg Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 7.5 Weight (kg): 2300 Year 2007-2010, price: 5800 EUR Crjdpsra Nyujfx Ac Nsb Year 2011-2013, price: 6000 EUR YEAR 2018 COSTS 6000 EUR We also have HSM V-press 1160 max balers from 2014-2015 available.

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. The machine has produced just 16 bales in total and is therefore practically as good as new. Ideal for businesses seeking a high-quality baler without paying the price of a new machine. Csdpfxoyy Ddas Ac Norb

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Credpfxoyx U Hio Ac Nob Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 400 V, warranty duration: 12 months, total height: 1,140 mm, total length: 660 mm, total width: 1,040 mm, type of input current: three-phase, input current: 32 A, control voltage: 24 V, DGUV certified until: 04/2027, Deep Fryer F 60 Plus Floor Model NEW Model: F 60 Plus Floor Model Stainless steel construction with rotating basket LED timer Lifting mechanism with 5 stainless steel tilting pans / proofing trays Temperature controller & safety thermostat Steam cover, drip tray Crjdpoxp Ukaofx Ac Njb Capacity approx. 600/480 pcs/hour Stainless steel build Robust engineering Connection: 400V, 32A-CEE plug Brand new equipment with warranty + spare parts service Quality from a specialist supplier! Benefit from over 35 years of experience! We have many more deep fryers in stock!

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Identification Serial number: 076646 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Crjdpetr Nuqsfx Ac Nsb Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 10187, operating pressure: 180 bar, input voltage: 400 V, overall weight: 53 kg, The Kärcher HD 8/18-4 MXA eB Foam Plus Go!Further cold water high-pressure cleaner is a promotional model equipped with numerous special features. This unit is a showroom piece in like-new condition. The device is suitable for daily use in workshops or on the go. The scope of delivery includes the following: - ANTI!Twist - Pressure shut-off - Dirt blaster - eco!Booster - Spray lance, 840 mm - Trigger gun, EASY!Force - High-pressure hose length: 15 m - High-pressure hose type: Flex - Integrated hose reel Cedjyyv Ukepfx Ac Nsrb - Power nozzle - Foam lance - Quick coupling - Servo Control Technical data: - Power supply: 400V / 4.6 kW - Working pressure: 180 bar - Flow rate: 380–760 liters/hour - Power cord: 5 m

Condition: new, Year of construction: 2026, - Infinitely variable speed control - Quick-adjustable drilling depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack and pinion - LED head lighting - Continuous/standard drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Throat depth 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): 2 slots, spacing 125 mm - Digital speed display - Digital drilling depth display - Quick-adjustable drilling depth stop - Manual feed - Motor: 3-phase 400 V - Spindle speeds stepless 30 - 3,000 rpm Option Drill Package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-release drill chuck 3-16 mm (accuracy 0.17 mm) - Morse taper arbor MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 Crsdpfx Acsd Nk S Ie Nob Option: Coolant system: €605.00 FACTORY WARRANTY: 3 years DELIVERY: Free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! PLEASE ASK US FOR AN OFFER!

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,257 h, This STEINER Projet MJP 2500 Plus was manufactured in 2018. It's a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information. Machine Benefits Qualitative Machine Benefits • Offer consist of printer + easyclean postprocessing kit + resin material Technical Machine Benefits • Total print time: 2132 hours 5 minutes • Time since last printer restart: 2905 hours 45 minutes • Total part material used: 74. 5 kg • Total support material used: 67. 2 kg • Layers printed: 295736 • Mco cleaner 2500: 0. 8 kg • Visijet m2 sup: 67. 2 kg • Visijet m2g-cl: 19. 2 kg • Visijet m2r-bk: 3. 2 kg • Visijet m2r-gry: 51. 3 kg Extra Information Cjdpfx Aex Nr Thsc Nerb Machine still under power

Year of construction: 2018, condition: ready for operation (used), overall weight: 125 kg, total height: 952 mm, This optical measurement machine was manufactured in 2018. The MAHR MahrShaft SCOPE 250 plus features a high-resolution CMOS matrix camera, integrated 21" touchscreen monitor, and a CNC MarEcon control system. It supports a measuring length of 250 mm and can handle workpieces up to 100 mm in diameter and 5 kg in weight. If you are looking to get high-quality measurement capabilities, consider the MAHR MahrShaft SCOPE 250 plus machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Integrated pc with intel quad core cpu / windows 10 iot x64 / integrated 21" touchscreen monitor / dvd drive, network interface, 4 usb ports, 1 displayport • Max workpiece diameter: 100 mm / max workpiece weight: 5 kg Cjdpfjx Imrvox Ac Njrb • Measuring length: 250 mm / measuring diameter: 0. 2 to 40 mm / length error limit: 3 µm + l/100 (l in mm) / diameter error limit: 1. 5 µm + l/40 (l in mm) Dimensions Machine Depth 1054 mm

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Crsdpfsywhhksx Ac Nob Technical data: Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

Condition: new, Year of construction: 2026, Continuous/Standard Drilling Capacity: 18/20 mm Thread Cutting Capacity: M12 (depending on pitch) Spindle Taper: MK II Drilling Depth: 100 mm Cedpfovu Tmnex Ac Norb Throat Depth: 240 mm Column Diameter: 82 mm Usable Work Surface (W x L): 340 x 280 mm T-slot Size (Arm), Spacing (mm), Slot Width (mm): Number: 2, 125, 13/26 Speed Display: Digital Drill Depth Display: Digital Drill Depth Stop: Quick-adjust stop ring Manual Drill Feed Table Height Adjustment with Rack-and-Pinion Motor: Three-phase AC – frequency-controlled, 230 V, 0.75 kW Spindle Speeds: Infinitely variable 30 – 3000 rpm Table Work Surface: 155 - 415 mm Base Work Surface: 155 – 550 mm Machine Dimensions: 355 x 705 x 1,825 mm Weight: 195 kg Optional Accessories Drilling Bundle 3 consisting of: - Machine vice [felix] 2.0, 100 mm - Quick-action drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 D0Ezfi Factory warranty: 3 years Free delivery including packaging (Germany only) Delivery time: available immediately from stock NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN OFFER!