Used hydraulic presses single column for sale (64)

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with draw cushion - Pressing force: 2500 kN - Installation height: 800 mm Ndodeycl Evepfx Aazob - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW - Dimensions: 3500 x 2000 x 1200 mm can be retrofitted with: - new control system, new control cabinet, light curtain (1 cycle, 2 cycles, protection), new hydraulics, - new seals - new occupational safety inspection

Condition: good (used), Year of construction: 1983, Offer 26245 Technical data: - max. pressing force 100 t - max. ram stroke approx. 500 mm - stroke speed 25 mm/s - return speed 125 mm/min - installation height approx. 800 mm - overhang to the center of the ram 380 mm - ram clamping surface 530 x 400 mm - ram clamping pin 40 mm - table size 750 x 560 mm - table bore / through hole in the table 200 mm - table height above floor 720 mm Ndedpfsz A Az Rox Aazjb - oil filling volume approx. 200 l - drive 400 V / 11 kW - space requirement approx. W 1150 x H 2980 x D 1850 mm - weight approx. 4600 kg

Condition: good (used), Year of construction: 1981, machine/vehicle number: 027-006-20, Offer 26244 Ndodpfx Asz A Axvjazsb Technical data: - Max. pressing force 63 t - Max. ram stroke 500 mm - Stroke speed 200 mm/sec - Return speed 400 m/min - Installation height 800 mm - Overhang to center of ram 360 mm - Ram clamping surface 530 x 460 mm - Ram clamping pin 40 mm - Table size 750 x 560 mm - Table bore / through hole 180 mm - Table height above floor 700 mm - Oil capacity (approx.) 300 l - Drive 380 V / 11 kW - Space requirement (approx.) W 1150 x H 3100 x D 1750 mm - Weight (approx.) 4300 kg

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Ndedpoz Duxwefx Aazsb Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Ndjdpsz Dug Ijfx Aazob Machine weight approx.: 16 t

Condition: used, Year of construction: 1997, Press force: 40 t Stroke: 620 mm Throat depth: 280 mm Shut height (stroke up): 830 mm Table area: 620 x 520 mm Table opening: 150 mm Table height above floor: 600 mm Ram area: 150 mm Downstroke speed: 120 mm/s Ndsdjzypmwopfx Aazeb Upstroke speed: 30 - 450 mm/s

Condition: used, Year of construction: 1987, Pressing force: 65 t Stroke: 1100 mm Frame width: 930 mm Side frame opening: 705 mm Njdpfezyl Dfox Aazsdb

Condition: excellent (used), functionality: fully functional, Facing & Centering Machine Model: FZWD 160 Year: 1978 Location: Rostock Country: Germany Manufacturer: WMW Saalfeld Control system: Conventional Machine weight: 4 t Total power requirement: 19 kW Dimensions (L x W x H): 3.1 x 2.59 x 1.7 m Workpiece diameter: 20 - 160 mm Workpiece length: 140 - 1,000 mm Workpiece weight: 125 kg Cutter mounting: SK 50 Rapid traverse: 6,000 mm/min Spindle speeds (cutter head): 56 ... 280 rpm Feed rates, stepless: 15 ... 800 mm/min Max. milling slide stroke: 230 mm Ndsdpfxsytitre Aazsb Max. cutting depth: 6 mm For center drills: 4 ... 20 mm Feed rates, stepless: 15 ... 375 mm/min Max. feed travel: 60 mm

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation Ndsdpfev Rwu Uox Aazsb

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Ndodpfeumk Naex Aazjb Model: 7092513 Type: HES16MP General: Display: 0-400kp/cm2 / 0-25Mp

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Ndjdpfx Aajxuhzcozob Technical Data: - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 054-008-212, Offer 25272 Technical data: - Max. pressing force: 25 t - Max. ram stroke: 500 mm - Stroke speed: 0 – 2.4 m/min - Return speed: 0 – 12 m/min - Installation height: 800 mm - Throat depth to ram center: 360 mm - Ram clamping area: 440 x 360 mm - Ram mounting shank: 40 mm - Table size: 630 x 500 mm - Table bore/opening: 180 mm - Electric foot switch - Two-hand control panel - Drive: 400 V / 8.75 kW - Required space approx.: W 800 x H 2750 x D 1150 mm - Weight approx.: 2000 kg Nsdpfx Aajy Ewtrszjdb

Condition: used, Year of construction: 2013, pressing force: 500 t, total length: 6,000 mm, total width: 3,000 mm, total height: 5,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Njdpfx Aaszyd Hljzedb Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Pressing force max.: 500 t Dimensions (LxWxH) approx.: 6000 x 3000 x 5000 mm Weight approx.: 200,000 kg Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2000, pressing force: 1,600 t, total length: 6,000 mm, total width: 3,000 mm, total height: 8,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Pressing force max.: 1,600 t Dimensions (LxWxH) approx.: 6000 x 3000 x 8000 mm Weight approx.: 200,000 kg Nodozxkrrspfx Aazodb Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, pressing force: 10 t, stroke length: 400 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 500 mm, table length: 400 mm, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, total length: 1,300 mm, total width: 1,000 mm, total height: 2,350 mm, overall weight: 1,300 kg, Equipment: documentation/manual, PYE 10 S/1 hydraulic press with ejector. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Working pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Daylight: 630 mm. Cylinder stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Maximum force of the lower ejector: 4 tons. Ndedpfx Aowb Dhnjazob Stroke of the lower ejector: 160 mm. Power consumption: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Technical condition of the machine: very good. The machine has undergone a major overhaul.

Condition: used, Year of construction: 1999, Hydraulic press Dunkes HEZ 100-40, year of manufacture 1999 Hydraulic press Dunkes HS2 63, year of manufacture 1999 Ndsdpfx Aszu Arveazjb Eccentric press Ebu 75, year of manufacture 1985

Condition: new, Year of construction: 2026, pressing force: 100 t, Durendus DCD-100 – Hydraulic Deep-Drawing Press in C-Frame Design 15–100 t – 800 × 600 mm For sale: a hydraulic C-frame deep-drawing press (single-column press) from Durendus with an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep-drawing, and assembly tasks. It is equipped with an integrated deep-drawing cushion and a state-of-the-art Siemens control system. Featuring high travel speeds and precise control, it is ideal for both series production and flexible single-part applications. ===== Technical Data & Information: Hydraulic C-Frame Press – DCD-100 ==== General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / single-column press - Pressing force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm Njdpoyw I T Hofx Aazedb ==== Working Area - Max. distance table – ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Rapid traverse speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank capacity: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: air cooler ==== Additional Functions - Deep-drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance available ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operation statuses via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep-drawing, forming, assembly operations, punching processes, series production, toolmaking Single-column press, C-frame press, deep-drawing press, hydraulic press, industrial press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety requirements. Additionally, our presses exceed Canadian and European safety standards by fully complying with the national Brazilian safety guideline NR 12, which is based on these requirements. Our core strengths are special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Njdpfxjhmi T Uj Aazedb Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, pressing force: 30 t, table width: 600 mm, table length: 600 mm, total length: 1,869 mm, total width: 850 mm, total height: 2,620 mm, overall weight: 2,900 kg, Hidrobrasil Single-Column Press – 30 t – 600 × 600 mm – 400 mm stroke For sale is a hydraulic single-column press (C-frame type) manufactured by Hidrobrasil, featuring 30 t pressing force and a compact design. The machine is equipped with a table size of 600 × 600 mm, making it ideal for assembly, straightening, and pressing operations, as well as for small batch production in workshop and manufacturing environments. ==== Technical Data & Information: Ndedpfxjvhcykj Aazeb Hydraulic Single-Column Press – 30 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Design: C-frame press - Machine type: Assembly press - Pressing force: 30 t - Machine weight: approx. 2.9 t ==== Working Area - Stroke: 400 mm ==== Table & Ram - Table size: 600 × 600 × 100 mm - Clearance behind table: 50 mm - Table fixing points: 600 / 800 / 1000 mm ==== Speeds - Downward speed: 10 mm/sec - Upward speed: 24 mm/sec ==== Hydraulics & Drive - Motor power: 3 kW - Oil tank: 60 l ===== Assembly operations, press-fitting operations, straightening work, workshop applications, small series production Hydraulic press, single-column press, C-frame press, assembly press, industrial press

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm Ndodew Smukspfx Aazjb mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 2021, machine/vehicle number: A2536805, pressing force: 40 t, pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. Njdpsfxyhfefx Aazjdb spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Condition: excellent (used), pressure 16 t Ndsdpfxsyrhmho Aazob weight of the machine ca. 16 t

Condition: used, Year of construction: 1990, pressure 25 t Nedpfx Ast Hw Ezoazjdb throat 250 mm stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm Njdpfot Hw Dwjx Aazodb table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg Nsdpet Hwrzsfx Aazjdb dimensions of the machine ca. m