Used Hegla Lg 30 L for sale (76,256)

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter Knedpfxsdpat Ij Abvsc -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg

Condition: used, Autotherm Kodozd Rtyjpfx Abvenc Type: Autotherm temperature control unit AWF 130-27/VK/6K 6-circuit temperature control unit Without active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1x temperature control in the main circuit Includes 6x temperature measurement in each supply line Includes 6x temperature measurement in each return line Includes 6x flow rate and pressure measurement in each supply line Includes 6x flow rate and pressure control 1 l/min .. 12 l/min and 0.1 bar … 3 bar Including changeover control Including frequency inverter-controlled pump in the main circuit Including 6x 3-way valve Includes 6x additional relief valve 2 … 12 bar, adjustable Preset to 2.4 bar Includes filling and draining device For all circuits, jointly/simultaneously Including 50-liter integrated tank Including pneumatic drain function Including S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated into the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C chilled water network. The cooling capacity at a supply temperature of +20°C is: 50 kW. This increases the cooling speed in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The footprint of the base unit increases by approx. 0.3 m² according to the data sheet). Assembly in Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, separate enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply. Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated. For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Sold ex-works! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: Ksdpjzn H D Nefx Abvjnc 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm Kodpsfv Hphjfx Abvsnc ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine with 3kW fiber laser Exhibition machine with few operating hours (approx. 10 hours) Knsdey A Tu Topfx Abvsc Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. A super-affordable entry into laser cutting technology - Designed specifically for steel and stainless steel processing Exhibition machine with very few operating hours - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approximately 3.0 x 3.0 meters of floor space - Top quality, arrange a viewing now! Cutting of steel sheets up to 20mm Cutting of stainless steel sheets up to 10mm - Travel range approx. 1300 x 1300mm - Size of the support table: approx. 1300 x 2500mm (i.e., a whole medium-format sheet fits into the machine) - Machine control in German - Automatic front door (secured with a light curtain) - Extensive collision protection measures - Large front window for observing the cutting process - Programmable, proportional valve for oxygen - Incl. cutting parameter file - Incl. box module - Very easy to operate - Powerful laser chiller - Incl. extensive wear parts package The sale is exclusively to commercial enterprises. Delivery / consultation / sale only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.2m Height: 2.3m Length: 3.3m Total weight: approx. 3400kg Leasing or hire purchase is possible through our financing partner. Do you need a different laser power, table shape, or table size? No problem. I will gladly prepare a suitable offer. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here. From 0.5 kW to 20kW laser power.

Condition: used, empty load weight: 7,000 kg, maximum load weight: 28,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2005, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank semi-trailer – Manufacturer: Parcisa S.A. – First registration: 05/09/2005 – Number of axles: 3 – Suspension: Air – Axle type: BPW-Eco-Plus – Brakes: Drum – Length: 10980 mm – Width: 2550 mm – Height: 3600 mm – Unladen weight: 7000 kg – Body manufacturer: Parcisa S.A. – Tank material: Stainless steel – Total tank volume: 30065 L – Number of tank compartments: 4 – Insulated – CIP cleaning. Knjdpfsz Td U Uex Abvoc

Condition: used, capping head for BVS 30 x 60 price / pcs. Kodpfx Abjz S Rbrjvonc short or long shaft

Condition: used, functionality: unexamined, machine/vehicle number: H2X387V05841, Year of construction: 2019, operating hours: 7,735 h, load capacity: 3,000 kg, lifting height: 6,430 mm, free lift: 1,500 mm, DGUV certified until: 03/2027, fork length: 1,400 mm, Equipment: UVV, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 6,430 mm Free lift: 1,500 mm Kjdpfxsyxbvqj Abvenc Overall height: 2,824 mm Fork length: 1,400 mm MACHINE DETAILS Drive: Electric Dimensions & Weight Dimensions (L x W): 3,900 x 1,200 mm Weight: 5,600 kg Battery: 80 V, 625 Ah, measured at 83.2 V Operating hours: 7,735 h EQUIPMENT Triplex mast Facelift model with tilt angle display 3rd valve, sideshift 4th auxiliary valve free for fork positioner Half cab with windscreen wiper Lateral fall protection LED work light front LED work light rear Rear safety light Comfort seat Former Linde full-service unit Service valid until 03/2027 UVV inspection valid until 03/2027 All measurements are approximate. No liability accepted for typographical or measurement errors. COLLECTION TERMS Loading from the side up to 5 t possible on site with large forklift at buyer's own risk. Collection ONLY upon receipt of payment confirmation by email! Collection WITHOUT appointment Monday to Friday 7:00–16:30. A mast that is too high can be dismantled for transport upon request. If the machine is not collected within the agreed time, a storage fee of €20 per machine per day will be charged (payment must be completed before collection).

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 6,500 kg, door opening width: 1,500 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with a 6kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as well as first-class service. Please also note our favorable leasing/hire-purchase offers. - Machine with automatic exchange table - very space-saving - extremely energy-efficient cutting system - requires only approximately 9 x 3.5 meters of floor space - 6kW laser source from MaxPhotonics (G5 source) - Top quality, arrange a viewing now! Cutting of steel sheet up to 25mm (maximum 30mm) Cutting of stainless steel sheet up to 15mm Cutting of aluminum sheet up to 15mm Cutting of brass sheet up to 12mm - Travel range 1500 x 3000mm - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - on three sides, large laser protection windows for observing the cutting process - automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. enclosure module - very easy to operate - powerful laser chiller - Machine control in German - German service and spare parts supply - powerful laser chiller - Filter extraction system optional Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Delivery/consultation/sales only in Germany/Austria/Switzerland. Machine dimensions approximately: Length: 9.0m Height: 2.3m Kedohncfcspfx Abvenc Width: 3.5m Total weight: approx. 6500kg Do you need a different laser power, a different table shape, or a different table size? No problem. I would be happy to create a suitable offer for you. For example, a 1 kW machine from €29,990 or a 3 kW machine from €32,900 Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Year of construction: 1990, condition: used, machine/vehicle number: 55711, Item No. 25372-1 Approximate technical data: - Boiler capacity: 3000 liters - Operating pressure: 11 bar - Maintenance opening - Boiler diameter (approx.): 1150 mm Knedpfx Abjzxdkhjvec - Space requirement (approx.): W 1350 x H 3500 x D 1350 mm - Weight (approx.): 700 kg

Condition: good (used), Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks, hydraulic cylinders -Manufacturer: WMW, clamping cylinder stroke 20 mm -Type: 25 TGL 30-7311 -Shaft Ø 14 mm -Number: 16x clamping cylinders available Knodpfx Abjwzilljvec -Price: per piece -Dimensions: Ø 35 x 127 mm -Weight: 0.6 kg/pc.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,307 h, load capacity: 3,000 kg, lifting height: 4,890 mm, free lift: 1,750 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Kodpfsxaqyfox Abvjnc Technical condition: Good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: Price includes new UVV inspection (we use original Still parts), new paint (original Still), new white tires, charger with matching plug, battery manufactured in 2019, overhauled and tested with Kappa test (87%), charger with matching plug, front and roof windshield will be retrofitted. We will gladly arrange cost-effective transport for you. Rental / lease-purchase possible!!! Side shifter, 3rd valve, rear work light, front work light, roof protection, windshield, full free lift, CE certificate.

Condition: used, first registration: 03/2018, Year of construction: 2018, LANGENDORF SKA 24/3 - Axle - FULL ALUMINUM - Grain tipper trailer, 55 m³ • ABS • EBS • WABCO SmartBoard • ALCOA rims • 3 x air-suspended 9-ton SAF axles • Lift axle (1st axle) • GVWR: 36,000 kg (39,000 kg technically possible!) • Tare weight: 6,220 kg • Payload: 32,780 kg • Tires: 385 / 65 R 22.5 • Tire tread: 80 - 90%! • Platform • Roller cover • Overall trailer length: 10,227 mm • Volume: 55 m³ - 1st owner - German trailer Kedpfx Abjz Ezykevsnc - New inspection certificate! Errors and prior sale excepted! = Further information = Tare weight: 6,220 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls, side flap Equipment: - 6 lashing eyes - Welded frame - ABS walls Net: €6,121.85 / Gross: €7,285.00 Article number: SPL220301518.33 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 300 x 150 x 180 cm • Exterior dimensions (L x W x H): 435 x 198 x 238 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,000 kg • Unladen weight: 663 kg • Payload: 1,337 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/70R13 • Suspension: ALKO/BPW rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor made of multiplex • ABS walls, extremely smooth exterior walls for box construction • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame is very torsionally stiff due to its robust design • 6 lashing eyes recessed inside the side edge (1000 DaN/kg), TÜV certified! • Battery-powered interior light, for free positioning • 2-wing rear door with stainless steel swivel bar closure, lockable • Continuous interior height: approx. 178 cm • Continuous interior width: approx. 142 cm • 2 maneuvering handles in front • Side flap on the right, lockable • Maintenance-free rubber spring axles from ALKO/BPW • Reversing automatic • ALKO/BPW overrunning device and parking brake • Very stable, securely screwed V-drawbar • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted. Knsdpfjzu N Dljx Abvjc

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, side door Equipment: - 6 tie-down points - Welded frame - Multiplex walls Net price: €4,873.11 / Gross price: €5,799.00 Kedozu N D Sepfx Abvenc Article number: SPL115301515.24 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-1 • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 300 x 150 x 150 cm • External dimensions (LxWxH): 435 x 198 x 208 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,500 kg • Tare weight: 550 kg • Payload: 950 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor and walls made of multiplex • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame very torsion-resistant due to its stable design • 6 recessed tie-down eyes inside on the side edge (1000 DaN/kg), TÜV certified! • Battery-powered interior light for free positioning • 2-wing rear door with stainless steel twist-lock closure, lockable • Continuous interior height: approx. 148 cm • Continuous interior width: approx. 142 cm • 2 maneuvering handles at the front • Side door on the front right with twist-lock closure, lockable from the outside • Size of the side door approx. 147x67 cm • Maintenance-free rubber spring axles from KNOTT • Reverse automatic • KNOTT inertia coupling and parking brake • Very stable, securely screwed V-drawbar • 13-pole plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls Equipment: -6 lashing points -Welded frame -ABS walls Net: €5,878.15 / Gross: €6,995.00 Article number: SPL227301521.31 Technical data: • Brand: Hapert Trailers • Model: Sapphire L-2 • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Interior dimensions (LxWxH): 300 x 150 x 210 cm • Exterior dimensions (LxWxH): 435 x 198 x 268 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,700 kg • Unladen weight: 705 kg • Payload: 1,995 kg • Chassis: Low loader (wheels beside the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Wooden floor made of multiplex • ABS walls, extremely smooth exterior walls for box body construction • Improved cleaning options • Optimal preparation for extensive advertising printing • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Longitudinal members continuous • Frame very torsionally rigid due to its stable construction • 6 lashing eyes recessed inside the side edge (1000DaN/kg) TÜV certified! • Battery-powered interior light, for free positioning • 2-wing rear door with stainless steel rotary latch, lockable • 2 maneuvering handles at the front • Maintenance-free rubber spring axles from KNOTT • Reversing aid • KNOTT overrun device and parking brake • Very stable, bolted V-drawbar • 13-pole plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific features! _____ - Financing or leasing possible Knjdjzu N Nbepfx Abvsc - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, functionality: fully functional, fuel type: diesel, color: red, Equipment: airbag, From our product range, we offer you: Equipment vehicle logistics GW-L2 all-wheel drive on an off-road MAN TGM 13.290 chassis A vehicle for many tasks. Suitable for use in severe weather conditions as well as for establishing a water supply over long distances, even in difficult terrain during forest and vegetation fires. As a modular replacement for rescue and equipment vehicles, or with water tanks for transporting firefighting water. Or... ...just right for your requirements! Chassis: • MAN TGM 13.320 4x4 EURO 6 with 320 hp (235 kW) with automatic transmission • Track-equal single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire engine red) • Cab with auxiliary heater Ksdpoz Dq Uzefx Abvsnc Superstructure: • High-quality superstructure made of rust- and corrosion-free material • Two generously sized side equipment compartments • Fold-out steps for each side equipment compartment • Individually customized equipment storage made of stainless steel according to your wishes Tail lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Platform dimensions 1810 mm x 2520 mm (height/length x width) • 2-button foot control • 2-fold roll-off safety • LED platform lights Safety and lighting • LED mini light bar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rear view camera • Comprehensive LED lighting in the crew compartment and all equipment compartments • LED ambient lighting on the superstructure and additional spotlights • Pneumatic LED light mast with remote control We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All information provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement is not an offer, but rather an information. Subject to prior sale!

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: Knodpfxoxyh Nds Abvjc >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: used, diameter / mm boring diameter / mm - / total power requirement / kW Kjdpfx Aeyk Ilnebvjnc weight of the machine ca. / t required space / m dividing head Chuck DH 130 x 4 II / TGL 30 2332 Exact dimensions available upon request.

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of cutting unit (cm): 175 * Weight without cabin (kg): 0 * Grain tank capacity (hl): 6.5 * Model: MF30-6 * Serial number: 0D7758 * Year of manufacture: 1967 ---- Internal vehicle number: 8144 ---- Errors and prior sale reserved. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp Kodpfx Abjvhvf Tevenc

Condition: good (used), Shaft, axle shaft, spindle shaft, axle bolt -Shaft: axle shaft spindle shaft 2 pieces -Type: Shaft Ø 30/40/45 mm -Dimensions: see photos -Shipping/Price: complete Knsdpfxswq Ip Ie Abvjc -Total dimensions: Ø 65 x 82 mm -Weight: 0,6 kg/pc.

Condition: used, mileage: 839,600 km, power: 210 kW (285.52 HP), first registration: 11/2009, fuel type: diesel, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: air conditioning, parking heater, * Mercedes-Benz Ciatro O530K * Transmission recently renewed * 30+44 seats Knodpfx Ajxc Rxyobvec * 10.6m length * EVOBUS * LAWO destination display * Wheelchair ramp * Air conditioning * Auxiliary heater * Tachograph * Euro 5 * Subject to prior sale, errors and alterations excepted

Condition: excellent (used), functionality: fully functional, Offered is a Frey holding device K-2/30 in like-new condition, including 2 filling tubes. Kodpsw Tm Rzjfx Abvjnc Further details available on request. Multiple units available. Payment by cash or advance payment. Sale only to commercial traders, no warranty, no guarantee.

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. --- Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin Kjdpfxjx Efzuo Abvonc - Mechanical landing legs at front - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: excellent (used), Year of construction: 2019, Ref: 10959 . 2019 DGR RHLE 30 Book Line Fully automated, compact, automatic casing-in line for short-run hard cover book production. Excellent condition, only 375,000 books made! Features: * Very short make-ready times (no need to change format parts!) * Automatic motorised format change (optional) * Simple operation by a single operator *Superior industrial book quality *Small footprint Knsdpjy Avl Ijfx Abvsc *Offline or inline operation possible *Special single copy option for individual books * Designed for books with rounded or square spines Equipped with: Book block feeder Pre-heating section for hot-melt bound books Rounding & backing station (adjustable, no size change parts req.) Back lining & Headbanding station (with hot-melt or PVA glue) Flexible case magazine for plastic or hardcover cases Case preheating & forming unit (adjustable to the spine radius) Casing-in station with PVA gluing (adjustable film thickness) Hot-melt joint gluing station with pre-melter Transfer to; FE33 Pressing & joint forming machine Cooling, drying conveyor. Specification: Mech. speed, Max: 1200 cycles/h Format range (W x H) Max: 300mm x 300mm / Min: 100mm x 120mm Book block thickness, Max: 60mm / Min: 8mm (opt. 4mm) Dimensions: ca. 5000mm x 4000mm