Used Italpack Tt5/50 Farina for sale (33,663)

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. Dsdpeu Rurujfx Aixjuu - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler, ideal for residential buildings, small commercial premises or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation within a space-saving design. — Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding and cleaning 🔧 Compact construction – perfect for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating units, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of about 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Augers • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers and many more components – from private to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus and many more. 🌐 Current Offers: Dusdpfx Aewahhvoixeu You can find most of our current offers on our website: topheatingsystems.com We also have further units available that are not yet listed online. 📅 Viewing: Viewings can be arranged by appointment at our warehouse. If you are interested, please feel free to contact us – we look forward to helping you find the right solution.

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Dsdpsu Dm Izjfx Aixeuu

Year of construction: 2023, condition: excellent (used), Invoice: I issue a VAT invoice Brand: unbranded Type: hydraulic pump Model: Type- CBL 50-200/200 Manufacturer code: 2 Duodpfxoy Amumj Aixeu Packaging condition: no packaging

Condition: like new (used), functionality: fully functional, bending force (max.): 80 t, control type: CNC control, Equipment: documentation/manual, safety light barrier, FARINA press brake 4175 x 80, model 80/40. Motorized back gauge, CNC DELEM DA 24e – 3 axes. SCHIAVI tool holders, compensation table. Used machine. Internal code: SVR 397. Dusdpfxoyv Hbte Aixeu

Condition: good (used), Year of construction: 2014, DMG MORI DMU 50 Technical Features of this 5-axis machining center Manufacturer: DMG Model: DMU-50 Year: 2014 3D CNC Control: HEIDENHAIN ITNC530 SMART NC Screen Type: DMG ERGOLINE® CONTROL 19” NC Swivel Rotary Table Simultaneous: INCLUDED Table Surface: 630×500 mm Max Weight Allowed on Table: 250 kg / pallet Turning Table (C Axis): 0.001º (±360º) Axis: Longitudinal Traverse (X Axis): 500 mm Dujdsy Smynjpfx Aixsu Cross Traverse (Y Axis): 450 mm Vertical Traverse (Z Axis): 400 mm Rapid Feed (X/Y/Z Axis): 42,000 mm/min Working Feed (X/Y/Z Axis): 10,000 mm/min Tilting Range (B Axis): -5º/+110º Spindle: Spindle Speed: 10,000 r.p.m. Taper: SK40-DIN 69871 Main Motor Power: 25 kW Automatic Tool Changer (ATC): ATC Positions: 60 Max Tool Length: 300 mm Equipment: Chip Conveyor: INCLUDED Active Control Cabinet Cooling: INCLUDED Tool Touch Probe: INCLUDED Direct Measuring System: INCLUDED Flushing Gun: INCLUDED Portable Handwheel: INCLUDED Suction System: INCLUDED Internal Coolant: INCLUDED Coolant Deposit with Paper Filter: INCLUDED Others: Machine Dimensions (L x W x H): 5,100 × 3,200 × 2,750 mm Total Power: 27 kVA Machine Weight: 4,500 kg Price on request

Year of construction: 2025, condition: new, coolant unit (paper belt) electrical (plug-in) and mechanicaly prepared f. JUNG HF50 / JF520 / JF625 Duedpshcn I Tsfx Aixou - with your inquiry, pleas send us the type of your machine - in stock, subject for prior sale

Year of construction: 2021, condition: refurbished (used), used grinding flange f. JUNG HF50 / JF520 / JF625 Dusdpfxohcn I Ee Aixsu - cleaned and checked -

Condition: excellent (used), Weishaupt RGMS 50 dual fuel burner 5400kw. Gas +heavy oil very rare Dujdpfxjmnqblo Aixsu

Condition: like new (used), 50 linear meters pallet racking Nedcon New equipment, see pictures! A premium racking system from the renowned manufacturer NEDCON—a subsidiary of Voestalpine AG, headquartered in the Netherlands. Height: 7 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity per level: 3050 kg Dusdpfjfkgq Sox Aixeu Negotiable price: €10,950 net ex stock The offer includes: + 19 pre-assembled frames, depth 110 cm, height 7 m + 144 beams, length 2.7 m, 3050 kg load capacity/level + 288 safety locking pins + 38 concrete anchors Load capacity signs, documentation, etc. are included. Additional accessories can be found in our accessories catalogue. Frames painted blue RAL 5019, bracing galvanized. Heights from 2 m to 7 m in stock. Bay load: 12 tonnes, higher bay loads available on request. Beams painted orange RAL 2008. Beam lengths in stock: 1.85 m, 2.7 m, 3.3 m, 3.6 m. Items are in stock. Transport and assembly available on request. Different configurations available on request. Over 2,000 meters in stock. Viewing possible at any time by appointment. Further information upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers available from stock. (Changes and errors in technical data, specifications, and prices as well as interim sale reserved! Please see our Terms and Conditions; all prices excl. VAT ex stock.) Purchase / Sale We are constantly looking for or offering numerous items from various sectors – broom-clean company clearances – business liquidations – Fast – flexible – efficient! We also clear or dispose of items on behalf of insolvency administrators. Send us a brief description and we will get back to you promptly. To visit our website, please click on our logo!

Condition: used, 50 m3 / 50,000 l horizontal steel tank Dodpfxoxtmzxs Aixsuu Diameter: 2.50 m Length: 10 m Weight: 16 t The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder. Dedpfjibh S Hox Aixjuu

Condition: ready for operation (used), Year of construction: 2021, input voltage: 230 V, laser power: 30 W, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Duodpfx Ajzaqk Ssixju Laser power: 30 W Voltage: 230 V Frequency: 50/60 Hz EQUIPMENT Rulers in mm Atmos Cube Rayjet 230 V Beige extraction connection cable 9po Cutting table MM and inches 8015 Power cable 20A Wooden packaging Note: Accessories are sold as is, without warranty. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 6,892 h, load capacity: 5,000 kg, lifting height: 3,500 mm, construction height: 2,570 mm, empty load weight: 8,244 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 3,500 mm Overall height: 2,570 mm MACHINE DETAILS Fuel type: electric Front tire size: 355/50 - 15 (25%) Rear tire size: 200/75 - 9 (25%) Dimensions & Weight Overall length: 3,050 mm Unladen weight: 8,244 kg Operating hours: 6,892 h Dodjza Dnwjpfx Aixouu EQUIPMENT Front PTO Cabin Air conditioning 3rd valve 4th valve Front work lights Rear work lights Heater Full cab Impulse control Side shifter Fork positioner

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JUN7856, Year of construction: 2006, operating hours: 22,198 h, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, empty load weight: 10,850 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 7,000 kg Lifting height: 4,000 mm Platform: 1,400 mm Dsdpfx Aisza Ub Uexsuu MACHINE DETAILS Mast type: Simplex Drive type: Diesel Own weight: 10,850 kg ISO class: ISO Class 4 = 5,000 - 10,000 kg EQUIPMENT Heater Full cabin External reference: SL8371SP

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm y-axis: 400 mm z-axis: 400 mm Table Dujdpfx Aszb Uz Doixeu Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Feed rates: 5,000 mm/min Control system: Heidenhain TNC 124 MACHINE DETAILS Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Year of construction: 2024, condition: new, functionality: fully functional, We offer this UK Exchangers Ltd UKE-8-4PV-8 - (50 kW) 8 Plates, Packaged Heat Exchanger, year of construction 2024. With Control Panel, Pump, Thermostat and ESBE Actuator This heat exchanger is new, not needed for the job but has been held in storage for a couple of years. As you can see from 1 of the photos the attached thermostat controller has a crack at the cable entry point. WRAS Approved Model type: UKE-8-4PV-8 Thermal capacity: 50 kW Number of plates: 8 Serial number: C-54778/1 Duedezbrv Eepfx Aixou Year of manufacture: 2024 Design pressure side 1: 10 bar g Design pressure side 2: 10 bar g Design temperature side 1: 99 °C Design temperature side 2: 85 °C Test pressure side 1: 15 bar g Test pressure side 2: 15 bar g Volume side 1: 1 L Volume side 2: 1 L If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Dujdpfx Aox Axbcsixou

Year of construction: 2018, condition: new, TECHNICAL CHARACTERISTICS • Punching capacity: 500KN / 50Tn • Punching: Ø31x12mm Djdpsdx Rd Ujfx Aixjuu • Strokes per minute (15mm travel): 34 • Throat deep: 177mm • Stroke: 50mm • L angle at 90⁰: 80x80x8mm • Flat bars: 350x10mm • Round bars: Ø35mm • Square bars: 30mm • Triangular notching: 90x42x10mm • Bending station: 100x10mm • Motor: 3KW • Net weight: 950Kg

Condition: used, Year of construction: 2015, operating hours: 18,024 h, Type of fuel: Electric Colour: Grey Empty weight: 7.121 kg Dimensions (LxBxH): 305 x 140 x 280 cm Lifting capacity: 5.000 kg Lift height: 420 cm Fork dimensions: 1.150 x 2.240 mm Dusdpowfpk Aofx Aixsu - Year: 2015 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516329F00201 - Operating hours: 18024 - Lifting capacity: 5000kg - Lifting height: 4200mm - Overhead clearance: 2800mm - Free lift: 0mm - Fork length: 1150mm - Maximum fork width: 2240mm - Minimum fork width: 560mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Work lights - Mast: Duplex - Drive: Electric - Brand/Type: Still - Battery voltage: 80V - Transport dimensions: 3050mm x 1400mm x 2800mm (l x w x h) - Transport weight [kg]: 7121kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: like new (used), Year of construction: 2019, operating hours: 794 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller model: Siemens, overall weight: 7,750 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 60, We offer an DMG DMU 50 in great condition with only 794 hours. Machine will be in stock next week. Machine has following options: - Siemens 840D SL - Speedmaster Motorspindel 20.000 RPM 35 kW / 25 kW Torque 130 Nm / 86 Nm) SK40 - 60 tool automatic tool changer - Chip conveyor Duodpfx Aijzb Em Rjxou - Swivel table 630 x 500 mm - Internal coolant 20 bar - External air coolant - Air true spindle - Rotating clear view window - Spray Gun - Oil and emulsion mist separator - Touch probe Heidenhain TS460 - Tool measuring device Heidenhain TT160 - 3D quick set - Electronic handwheel

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 x Laser s.r.l. rotary biscuit moulding machine, used to deposit biscuits onto 18'' x 30'' baking trays. NEVER USED IN PRODUCTION. Model - RM-50-ST. Serial number - RMST.1774.06. Date of manufacture - 2006 (never used). Duedpjymzz Isfx Aixju Production speed - 4 to 14 pans / minute. Production capacity - 100 to 350 kg / hour. Overall dimensions - 2600mm long x 960mm wide x 1400mm high. Weight - 540 kg. Electrical requirements - 380 V / 50 hz / 3 phase. Supplied with approx. 90 x trays and fitted with a brand new belt.

Condition: excellent (used), Year of construction: 2021, Mileage: 2.021 km Drive: Wheel Empty weight: 408 kg Technical condition: very good Visual appearance: very good Transport dimensions (LxWxH): 3,1x1,5x1,95 Production country: NL Please contact Vink Machinery for more information Frisian Motors Leffert FM-50 * 2021 * Lithium battery drive Dusdpfex I Rawsx Aixeu * 1833 km * Dutch license plate * 3 speeds * Top speed 50 km/h * Glass windshield with wiper * Polycarbonate rear window * Tow bar * Built-in charger

Condition: good (used), Year of construction: 2007, operating hours: 443 h, color: blue, Mast: articulated arm Working height: 5.000 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Max. horizontal reach: 2000 m Production country: DE Please contact Vink Machinery for more information Teupen Leo 50 GT Duodper Hn H Defx Aixsu * 2007 * Diesel and 380 volts * 443 working hours!! * 50 meters working height * 20 meters horizontal range * 200 kg lifting capacity * Adjustable tracks * Remote control * Stamp machine * 13510 kg own weight * Including manual

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Duedpfx Aszbxyqjixju Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.