Used Microstep Spl-Pa 4501.15+S50 for sale (6,020)

Condition: refurbished (used), functionality: fully functional, total width: 800 mm, total length: 1,100 mm, total height: 1,100 mm, bending angle (max.): 360 °, overall weight: 600 kg, We offer this refurbished Peddinghaus Perfekt 32 KA or 32 PA rebar bending machine, year of manufacture unknown. Manufacturer: Peddinghaus Model: Perfekt 32 KA/PA PLA Serial number: 350114786/01 Hsdsyxc Smjpfx Akbon If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2014, overall weight: 1,075 kg, This KUKA KR120 R3200 PA was manufactured in 2014. It features a software version V8.3.11 and has approximately 21,000 operating hours. It includes a Smartpad KCP, weighs 1075 KG, and can handle loads up to 120 KG with a range of 3195 mm. Contact us for more information about this machine. • Software version: V8.3.11 • Operating hours: approx. 21,000 h • Load: 120 kg • Range: 3,195 mm Hjdjx D Ib Uepfx Akbsn Additional equipment • Smartpad KCP • The controller is not available

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 7,982 h, load capacity: 5,000 kg, lifting height: 4,850 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,520 mm, motor manufacturer: Perkins, fork length: 1,200 mm, tire condition: 70 %, overall weight: 8,400 kg, total height: 3,250 mm, total length: 4,100 mm, total width: 2,000 mm, maximum load weight: 5,000 kg, tire size: 8.25x15, fuel: diesel, Equipment: cabin, lighting, pallet forks, Linde S50 is in very good condition. Hodpfx Asy N Uu Uekbsn Mast with free lift. We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: good (used), machine/vehicle number: 16760, Year of construction: 2020, operating hours: 7,078 h, load capacity: 5,000 kg, lifting height: 3,700 mm, load center: 600 mm, enginetype: Electric, manufacturer: Jungheinrich Hedpsygpg Sjfx Akbsn

Condition: used, Year of construction: 1997, type of input current: three-phase, DELLA VEDOVE profile sander Hedpfxoytcv Ho Akbon

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min Hedpfeyl Ubfjx Akbjn PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: used, functionality: fully functional, machine/vehicle number: FN500446, Year of construction: 2015, operating hours: 9,194 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: duplex, construction height: 2,980 mm, fork length: 1,400 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN500446 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Non-marking Hjdpfoyr Ugnsx Akbsn Rear tyre type: Non-marking Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year: 2021 Description: UVV + maintenance Sideshift, Rear work light, front work light, heater, full cabin, beacon.

Condition: excellent (used), functionality: fully functional, pressing force: 120 t, stroke length: 300 mm, operating speed: 59 mm/s, reverse speed: 180 mm/s, table width: 600 mm, table length: 1,000 mm, distance table to ram: 800 mm, clearance between the columns: 850 mm, overall weight: 6,000 kg, operating pressure: 290 bar, installation height: 500 mm, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Hsdpfeylk Eajx Akbjn

Condition: good (used), Year of construction: 2007, Surface planer Model Panhans PA 51 Year of manufacture 2007 Planing width 510 mm Cutter block with 4 strip knives Feed table length 1180 mm Hsdpfxjwkf Hkj Akbon Discharge table length 1180 mm Motor 4.0 kW / 400 V

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036679, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 393 cm³, injection pressure: 1.892 bar, injection weight: 358 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 100 mm, opening stroke: 950 mm, installation height: 500 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 9,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base-level injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, simple operation, and short lead times. The machine is suitable for a wide range of applications, including the packaging, electrical and electronics, medical technology, and automotive industries. Your benefits: – Optimised price-performance ratio for a broad array of applications – High energy efficiency thanks to all-electric machine concept – Fast delivery times thanks to base machine concept with a wide range of available options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year of manufacture 2013) CONTROL SYSTEM • MC P1 with 15” TFT colour display featuring multi-touch functionality CLAMPING UNIT • Clamping force: 1,600 kN • Maximum mould opening force: 120 kN • Daylight (h x v): 570 x 520 mm • Platen size (h x v): 770 x 720 mm • Mould height min.–max.: 200 - 500 mm • Maximum opening distance: 950 mm • Maximum mould opening stroke: 450 mm • Ejector drive: electric • Ejector stroke: 100 mm • Ejector force forward/backward: 33 / 33 kN • Ejector speed forward/backward: 300 / 300 mm/s • Max. mould weight: 1,200 kg INJECTION UNIT • Screw diameter / type: 50 mm / standard • Effective L/D ratio: 20.2 • Injection pressure: 1,892 bar • Shot volume: 393 cm³ • Shot weight at max. stroke for PS: 358 g • Injection speed: 200 mm/s • Injection flow rate: 393 cm³/s • Screw drive/speed: 267 rpm • Plasticizing rate (standard screw): 36.5 g/s • Nozzle contact force: 42 kN ELECTRICAL PARAMETERS • Connected load: 31.2 kW • Installed heating capacity: 15.5 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS Hodpjyzz Irefx Akben • Net weight with control cabinet: 9.7 t • Length x Width x Height: 5.65 x 1.82 x 1.95 m ADDITIONAL EQUIPMENT • Wear-resistant plasticizing • BluePower full insulation of plastification cylinder • Open nozzle • 1-fold air valve (BWAP) • Pneumatic control for hot runner shut-off 1-fold • Electrical interface for pneumatic cascade 4-fold • Euromap interface for handling E18 + E67 • Euromap interface (central computer) E67, E77 • 4-way water manifold • Electrical pre-equipment for hydraulic auxiliary unit • Automatic central lubrication system • Adaptive Process Control (APC) • Injection compression moulding function • Graphic analysis package • Swivelling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: good (used), Year of construction: 2006, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Bramidan, cabinet press vertical baler -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure: 50 t -Filling opening: W x H 1350 x 760 mm -Bale ejection device: bale dimensions 1200x800x1100 mm Hsdpfxexnb Nyo Akbsn -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg

Condition: used, Keyboard, control panel, PLC workstation, programming device, handheld programming device, programming adapter -Manufacturer: Pilz, programming adapter with case -Type: P10 PA 304113 Hedeqh Ed Eepfx Akbjn -Dimensions of the case: 230/185/H45 mm -Total weight: 0.4 kg

Condition: good (used), Vibration warning signal -Type: PA 100 Hsdjb A S Ehjpfx Akbjn -Quantity: 6 pieces -Price: per piece -Weight: 0.2 kg/piece

Condition: used, Solenoid valve, disc valve, flap valve, electromagnetic valve, magnetic valve, solenoid gas valve, gas solenoid valve Hjdpjtuycnofx Akben -Manufacturer: Bürkert, solenoid valve unused -Type: 0212 A 3.0 FPM PA -ID No.: 00021315 -Voltage. 24 V -Number: 6x valve available -Price per piece -Dimensions: 62/32/H51 mm -Weight: 0.2 kg/piece

Year of construction: 1996, condition: good (used), Compressed air breathing apparatus, respiratory protection -2 bottle device Hsdpfx Aksb A H Afjbjn -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

Condition: good (used), Pneumatic cylinders -Type: ADVUP-63-50/110-PA -Max. pressure: 10 bar -Number: 2x pneumatic cylinders available -Price: per piece Hjdob A Sghepfx Akbsn -Weight: 4.5 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 10 mm -Piston diameter: 63 mm -Piston rod: 16 mm -Price: per piece -Number: 3 pieces -Dimensions: 68/87/H87 mm Hsdpfjfbbtusx Akbon -Weight: 1.2 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 30 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 15 pieces -Dimensions: 107/68/H689 mm -Weight: 0.8 kg/piece Hedpfofbclzsx Akbon

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece Hodsfbg Rhjpfx Akbon -Number: 2 pieces -Dimension: Ø 45 x 433 mm -Weight: 1.3 kg/piece

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp Hjdpfx Akofbcllsbon -Stroke: 40 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 96/68/H68 mm -Weight: 0.9 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo, compact cylinder type ADVU-40-30-PA -Stroke: 30 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm/M6 -Dimension: 82/60/H63 mm -Weight 0.6 kg. Hjdpfx Aof Sl Uyjkbjn

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 10 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces Hjdpfx Aefbclnskbjn -Dimensions: 112/77/H30 mm -Weight: 0.55 kg/piece

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 10 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 5 pieces -Dimensions: 80/68/H68 mm Hodpfxsfbclps Akben -Weight: 0.65 kg/piece

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Caenaho, geared motor type PA-09 / RD-09 -Voltage: 110 V / 50 Hz -Speed: 137 rpm -Performance: 1.27 m Technical data: see photo of the type plate Hedpeguzr Rsfx Akben Quantity: 1 piece available Price: per piece -Dimensions: 240/120/H200 mm -Weight: 6.2 kg

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, A gantry system for automated loading or transport of heavy parts is for sale. This gantry system can be used for various loading applications (milling machines, lathes, paint lines, welding units, etc.). X travel – 11.6 meters, Y travel – 2.38 meters, Z travel – 2.5 meters. All axes are driven by SEW servo motors. Servo-driven single gripper for parts up to 500 kg. Control cabinet – PLC control – Siemens S7-1500 and SEW drives. Hedpfx Akowdnb Dobon The gantry system can be inspected by appointment in Overath.