Used Potentiometer for sale (206)

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Oberwange swivelable Bending angle adjustable via potentiometer Lift height preselectable via scale Njdpjq T Ud Sjfx Afwsda Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Ndsdpfx Asyug R Refwoa enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection Ndodpfx Afoyug Hxowja • interface for Grundfos CIM fieldbus module.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. Nodpoy T R Swefx Afwjda A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2003, 1 used, very well-maintained universal milling machine with 3-axis digital display FAGOR, stepless feed and overarm drive Manufacturer: ARSENAL, Bulgaria Model: FUV 321 M Year of manufacture: 2003 Technical data: Spindles: Spindle mounting, vertical + horizontal ISO 50 Speed range, vertical, stepless 30 – 2000 rpm Speed range, horizontal, stepless 30 – 2000 rpm Nodpfx Afsbpmursweda Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Overarm adjustment approx. 600 mm Table swiveling ± 45° max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm Table adjustment: Feeds, longitudinal and transverse, stepless 12.5 – 630 mm/min dito, vertical, stepless 5 – 262 mm/min Rapid traverse, longitudinal and transverse 2.5 m/min dito, vertical 1.04 m/min Drive Drive power 7.5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, manufacturer FAGOR, model NV 300 M • Universal milling head system “HURON”, adjustable manually over 2 levels • Stepless feed via joystick and potentiometer in all 3 axes • Stepless speed for vertical + horizontal via potentiometer with 2 servo drives, manufacturer TELEMECANIQUE, model Altivar 28 • Stepless feed and stepless speed with digital display each • Overarm with motorized drive of the universal milling head • Increased speed range up to 2000 rpm • Automatic machining cycle for the X-axis • Horizontal milling device with 2 opposing bearing blocks • Coolant system • Central lubrication system • Swarf drawer • Machine feet • Machine light • Operating manual • Electrical equipment CE • CE compliant Original new price: 65,800.00 € net The machine can be inspected and demonstrated at our warehouse at any time after prior appointment. Siegfried Volz Werkzeugmaschinen Ruüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: new, Year of construction: 2026, machine/vehicle number: PRJ069841, ALZMETALL table drill press, drilling capacity in steel: 14 mm Short spindle, MK2, spindle stroke: 80 mm, overhang: 190 mm, column diameter: 65 mm, machine table usable support: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-table min./max. 75/357 mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240 mm, with T-slots 2 x 12 mm x 80 mm, distance spindle-base plate min./max. 437/437 mm, manual feed, machine height without options: 825 mm, net weight: 83 kg. - Speed, continuously variable, 230-4000 rpm Standard equipment: 5" TFT-LCD display with touch function: manual input of target spindle speed, display of actual speed, integrated depth display with touch-sensitive zero-point setting, virtual depth scale in the display, machine status indicators and warning messages in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU Ndjdpfx Afslub Htswsa AC motor, 230 volts, 50 Hz, plug pre-assembled, cable length 2 m, three separate buttons for right rotation - left rotation - stop, spindle stop via braking function, spindle guard with electrical protection, main switch lockable, mushroom push button (self-locking) for EMERGENCY STOP, speed adjustment continuously variable by means of a potentiometer, protection class IP54, spindle guard with electrical protection, paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black. Delivery time: from stock Waiblingen Beinstein.

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Nedpfeztxx Nex Afweda Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.

Condition: used, operating hours: 13,413 h, mileage: 113,676 km, power: 184 kW (250.17 HP), first registration: 04/2011, overall weight: 11,990 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 4,105 kg, empty load weight: 7,885 kg, next inspection (TÜV): 03/2027, wheelbase: 3,050 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, compressed air brake, cruise control, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, German vehicle, 1 owner, documentation available, original 113,676 km, only 13,413 operating hours, TÜV (roadworthiness certification) valid until 03/2027, condition as shown in photos. Superstructure: JOHNSTON VT500 Dual sweeper, superstructure engine IVECO N45 MNS 4.5 liter turbocharged, 66 kW. Sweeping assemblies: dual sweeping system left and right, 500 mm disc brushes, left and right trailing disc brushes with brush pressure relief control via potentiometer, articulated single-piece trailing main broom, separate activation of spray nozzles at disc brushes, at entry area, front under the bumper, and in suction shaft. Trailing suction shafts on both sides, suction shafts can be locked in raised position. Debris container and rear door made from stainless steel, container tipping and opening via cable remote control, container volume 5 m³, integrated water tank 1,000 liters. Control panel in cab, air conditioning, comfort driver’s seat (air-suspended, heated), 7” reversing camera system with two cameras for rear and sweeper monitoring, ABS and ASR, leaf/air suspension with lift/lower function, differential lock, electric windows, electrically heated mirrors, revolving beacons, Bluetooth phone, auxiliary headlights, CD radio. Wheelbase: 3,050 mm. Gross vehicle weight: 11,990 kg, curb weight: 7,885 kg, payload: 4,105 kg. Self-propelled working machine. In case of sale to business customers or export (EU and non-EU), German commercial code conditions apply. If a new TÜV inspection is desired, we can provide an offer through our partner workshops. Our offer does generally NOT include new TÜV inspection, new DGUV, new SP, or new UVV certification. Nodpfsy Ifcmox Afweda More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods to avoid misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors or inaccuracies in this offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to changes, prior sale, and errors.

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for both manual and robotic processing, used for polishing parts made of aluminum, steel, brass, and zinc die-cast. Ndodec Rfg Ujpfx Afwea Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Dust extraction connection: Ø 100 mm Dimensions (L x W x H): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Connection power: 4 kW Height to polishing spindle adjustable to customer requirements Made in Germany Warranty: 12 months Optional: Extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control, 1 main switch.

Year of construction: 2016, condition: new, machine/vehicle number: 16-PMME-01, A single-sided polishing machine for manual operation, used for polishing parts made of aluminum, steel, stainless steel, brass, and zinc die-cast, is for sale. Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Height to polishing shaft: 1,100 mm Extraction port: Ø 100 mm Dimensions (L x W x H): 600 x 600 x 1,500 mm Weight: approx. 150 kg Njdpfxec Rwngo Afweda Connection voltage: 3 x 400 V Connection power: 4 kW Made in Germany Warranty: 12 months Optional: An extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control; 1 main switch.

Condition: used, Year of construction: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Continuously variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Space requirements approx.: 4450 x 2935 x 2540 mm Total weight approx.: 6700 kg Equipment: - Electro-permanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer Ndodpfx Afoxhdz Eewoa - Coolant cleaning system with paper filter and magnetic separator 350 l – delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Njdpowrihnofx Afwoda Belt speed: 10 m/min to 45 m/min Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Ndjdpfx Aopu R Ncefwea Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position Ndodpfx Afjrwq Urjwea - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Usable width: 300 mm Belt length: approx. 5800 mm Njdpfxswqg Ene Afwoda Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: new, 1 brand new, semi-automatic, high-performance horizontal band saw machine with double column guidance and 2° cutting inclination to the table surface. Manufacturer: HUVEMA - BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm Saw band size 6000 x 41 x 1.3 mm Band speed, stepless 20-100 m/min Motor power 4 kW Machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / Special features: • Semi-automatic double column band saw • Linear guides • 2° sawing angle to the table surface • Stepless cutting speed adjustment via potentiometer on the control panel • Hydraulic vice • Hydraulically mechanically operated saw blade tension • Powerful drive motor • Sensitive cutting pressure adjustment • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant system • Feed roller conveyor 1200 mm • Chip brush • 1 piece of bi-metal saw band • Control panel • CE compliant Delivery time: approx. 8 weeks after order receipt Siegfried Volz Werkzeugmaschinen Ndedpebw H T Dofx Afwja Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: refurbished (used), REKORD 400 MODIFIED WITH TANK AND COOLANT SYSTEM SHARPENING MACHINE FOR CIRCULAR BLADES IN HARD METAL (CARBIDE) AND HSS SAWS (FULL OIL PROCESSING.) FEATURES Wheel diameter …………… ... 150. Wheel motor …………… .. HP 1 0.25 HP sharpening box movement motor Cooling system (FULL OIL) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifying glass lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable by potentiometer. Manual cutting degrees setting by means of a graduated rod. Ndjdjh A N R Sspfx Afwja N ° 1 copy disc N ° 1 diamond wheel diameter 150 x 4 - 60 ° degrees. N ° 1 Bakelite wheel for HSS Minimum blade diameter …………… ..mm. 30 (with small blade holder on request) Maximum blade diameter …………… mm. 400

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 274 F, turning diameter over cross slide: 65 mm, turning length: 223 mm, turning diameter: 160 mm, spindle bore: 100 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 115 mm, travel distance Y-axis: 69 mm, travel distance Z-axis: 230 mm, spindle motor power: 17,000 W, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 60 rpm, Equipment: documentation/manual, Multi-turret automatic lathe with numerical control (CNC), counter-spindle (sub-spindle), and motorized turret: CNC automatic lathe MUPEM WIN 6500, designed for precision machining in large series from bar stock. Robust multi-turret machine construction, equipped with a main spindle, counter-spindle (sub-spindle) with a synchronous drive device (pick-up), motorized turret, and independent front and rear transverse/vertical carriages, enabling simultaneous operations and highly efficient machining cycles. CNC control with color touchscreen (MUPEM interface), providing real-time display of the spindle, sub-spindle, turret, carriage positions (Z turret, Longitudinal, Front, Rear, Vertical 1, and 2), chuck, pick-off, and auxiliary outputs. Complete manual control panel: manual/automatic mode, speed selector (slow/medium/fast), increments (small/medium/large), feed potentiometers, and spindle speed percentage, emergency stop button, and locking key. Equipped with a bar feed system (Hydrobar LNS type loader, visible in the images), chip conveyor (Auxkal), and coolant system. Main technical features Headstock Maximum bar capacity with chuck: 65 mm Maximum chuck diameter: 160 mm Front spindle bearing diameter: 100 mm Main spindle Power: 17 kW (variable AC) Speed range: 60–3,000 rpm Turret 8 stations (1" hole), optional 6 stations (1 1/4") Nedezk D Siepfx Afwoda Maximum working travel: 230 mm Maximum feed force: 12,000 N Rapid traverse rate: 15 m/min Indexing time: 0.3 s Motorized turret 6/8 stations, 6/4 driven tools Tool holder shank diameter: 1 1/4" Maximum drill diameter: 16 mm / tap: 12 mm Motor power: 2 kW — max. 3,000 rpm Synchronous turret drive (Pick-up) Maximum clamping diameter: 32 mm Power: 2 kW — max. 3,000 rpm Transverse carriages Maximum travel: 69 mm Maximum feed force: 12,000 N Maximum longitudinal travel (6-axis version): 115 mm Vertical carriages Maximum travel: 69 mm Longitudinal adjustment: 50 mm Maximum feed force: 12,000 N Hydraulic system Pressure: 70 bar Tank capacity: 75 l Coolant system Flow rate: 30 l/min Pressure: 1.5 bar Capacity: 80 l Dimensions and weight Height from floor to spindle center: 1,135 mm Required area (approx.): 2,600 x 1,660 mm Overall height: 1,700 mm Approximate weight: 3,000 kg Included equipment Hydrobar type bar loader/feeder (LNS) Auxkal chip conveyor Coolant system Motorized turret with various clamping tools MUPEM CNC control with touchscreen

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. Nedpfx Afjyzzh Eswjda In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Including selectable frequency, in steps of 1kHz, range 180-300 kHz Fully revised in 2026 by Thermatool specialists Technical specifications · Input voltage: 3 x 380 V · Input current: 525 A · Welding frequency: 180 - 300 KHz Ndjdpfx Aeymadbjfwja · Output power: 350 kW · Auxilirary service voltage: 24Vdc · PLC Siemens S7 1. DC Power supply • SCR Power Controller/Stabilizer - Provides constant output power for consistent weld quality. • Rectifier Circuit achieving 6 pulse Rectification. • Solid State Low Ripple Filter - Reduces AC line harmonics and switching transients that can affect weld quality. • AUTOMATIC SPEED POWER CONTROL Automatic Speed Power Control - Automatically ramps power up and down in line with mill speed, minimizes scrap on stopping and starting. • PLC - Controls and monitors welder operation sequences and provides fault and running data for the Alphanumeric display 2. CFI 350KW VF Solid-state HF welder • Compact rugged enclosure - sealed and internally cooled. Provides small footprint whilst ensuring reliable performance in harsh mill environments. • Water cooled high frequency MOSFET power transistor modules – Modular design provides maximum flexibility, long equipment life and reduces time for maintenance. • AUTOMATCH Automatic Load Match – Fully automatic series and parallel load matching system which enables the welder to run at optimum efficiency with guaranteed frequency stability - Assists the tube producer in maintaining repeatability. • High frequency capacitor bank - Designed specifically for the Tube Welding application. Capacitors deliver high power with low voltage to minimize flashovers at the induction coil. • Water flow and temperature protection. • Output bus-bar system - Externally water-cooled for ease of maintenance. INCLUDING SELECTABLE FREQUENCY Selectable frequency, in steps of 1kHz, range 180-300 kHz 3. Remote control console • Display - provides operator and maintenance personnel a constant display of fault and running data for maximum productivity. • Power Control - Preheat and Main power potentiometers ensure precise setting of weld power and minimizes un-welded tube thus reducing scrap. • Pushbuttons and Control Switches - For safe simple operation and protection of plant personnel. Analogue Indication Meters - Provide back-up for Alpha Numeric display. 4. Closed loop cooling system • Plate Type Heat Exchanger - High efficiency reducing raw water consumption. • Stainless Steel Water Pump & Plastic Pipework • Automatic Temperature Control Valve - Maintains a constant water temperature thus avoiding condensation inside the equipment. • Header tank with Level Switch. Comprehensive equipment inspection, supervised by a Thermatool specialist. Input voltage: 3 x 380 V Input current: 525 A Welding frequency: 180 - 300 KHz Auxilirary service voltage: 24Vdc PLC: Siemens 7

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 0,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 760 x 600 x 2000 mm Njdpfx Asvzhd Uofweda Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, Year of construction: 2023, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min Ndodpfx Ast U Sc Rsfwea column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, bore capacity in steel (diameter) 34 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 1,3 table: 400 x 420 mm Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 2,3 x 0,6x 1,1 m - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system Ndodpfx Afst U Scqjwsa - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530 The CORMAK BS530 metal cutting band saw is an advanced industrial machine designed for cutting steel components, pipes, and closed profiles. It is ideal for both workshop applications and serial production, offering a wide range of cutting angles from -45° to +60°. The stable cast iron construction and professional equipment ensure high precision and repeatability of the cutting process. Main advantages of the machine Large range of miter cutting angles – from -45° to +60° with precise angle reading on the scale. Dial tension gauge system – enables accurate control of blade tension, extending saw blade service life. Two-speed blade adjustment – 35/70 m/min, allowing the cutting speed to be adapted to the processed material. Reinforced hydraulic cylinder – provides smooth arm lowering adjustment via a potentiometer. Ergonomic control panel – equipped with start/stop buttons, coolant control, fast/slow mode selection, and emergency stop switch. Construction and technology The main frame of the band saw is made of high-quality torsion-resistant cast iron, ensuring stable operation even when cutting heavy components. The drive wheels are hardened and ground, while the blade guides equipped with bearings and carbide plates provide precise blade tracking. The drive system is based on a worm gear transmission, ensuring reliability and efficient power transfer. The machine is equipped with a powerful 2.8 kW motor and an integrated coolant system with a pump and coolant collection tray. Precision and work efficiency Thanks to its robust construction and carefully designed blade guiding system, the CORMAK BS530 metal cutting band saw provides quiet, vibration-free operation and high cutting quality. The automatic shut-off function after completion of the cutting cycle and the arm locking system further improve operator safety and ease of use. Applications The BS530 model is designed for professional applications in the metalworking industry, including: workshops, production plants, fabrication shops, processing lines. It is an excellent solution as a band saw for pipes and profiles, as well as for cutting solid materials and tool steels. Standard equipment 34 mm cutting blade Blade tension gauge system Quick-clamping vice with two-way positioning Coolant system with pump and collection tray Control panel with emergency stop switch Optional equipment Roller conveyor table for material feeding Technical data Parameter Value Working height 870 mm Cutting speeds 35 / 70 m/min Ndjdpfov R Tgtjx Afwoa Band saw blade dimensions 3770 × 34 × 1.1 mm Blade width 34 mm Coolant pump power 0.1 kW Total motor power 2.8 kW Power supply 400 V Machine dimensions 2200 × 1400 × 1500 mm Weight 640 kg

Condition: new, Year of construction: 2026, CORMAK Electric Pallet Truck The CORMAK electric pallet truck is an advanced transport solution designed for easy handling of heavy pallets and loads in warehouses, production halls, and other logistics environments. With a 1500 kg load capacity and an electric lifting system, it provides high efficiency, precision, reliability, and improved operator comfort. Main advantages of the electric pallet truck 1500 kg load capacity – enables the transport of heavy loads while maintaining full stability and safety. Electric lifting system – provides smooth and precise lifting of loads up to 190 mm, eliminating physical effort for the operator. Easy maneuvering – the electric drive system ensures quiet and efficient operation without requiring manual force. Speed control potentiometer – allows precise adjustment of travel speed according to working conditions and warehouse traffic levels. “Turtle mode” – enables slower and controlled movement, ideal for precise operations in narrow spaces. Integrated safety systems – electromagnetic brakes, belly safety switch, horn, and protective functions ensure a high level of operator safety. Construction and technology The CORMAK electric pallet truck is equipped with a 24V/20Ah lithium-ion battery, providing up to 3 hours of operation on a single charge and fast charging in only 2.5 hours. This allows the truck to return to operation quickly, increasing productivity and reducing downtime in intensively used warehouses. The truck is fitted with polyurethane wheels with a diameter of 80/210 mm, providing excellent traction, wear resistance, and smooth movement. This ensures stability and comfortable operation, even on smooth warehouse surfaces. Precision and work efficiency The CORMAK electric pallet truck allows precise maneuvering even in crowded working areas. Thanks to the speed control potentiometer, the operator has full control over travel speed, improving safety and reducing the risk of collisions. Njdoricvdspfx Afweda The “turtle mode” function enables slower and more accurate movement, which is especially useful when working in narrow warehouse aisles, loading ramps, or areas requiring precise positioning. The truck is also equipped with an electromechanical brake, ensuring safe stopping and easy control of movement, even in demanding working conditions. Standard equipment 24V/20Ah lithium-ion battery Polyurethane wheels with diameter 80/210 mm Electromechanical braking system Speed control potentiometer “Turtle mode” for precise maneuvering Charger included Technical specifications Parameter Value Load capacity 1500 kg Turning radius 1300 mm Fork height when raised 190 mm Fork height when lowered 85 mm Fork length 800 mm Fork width 550 mm Wheel diameter 80/210 mm Battery voltage / rated capacity 24V / 20Ah Li-ion Operating time on full battery Up to 3 h Charging time 2.5 h Drive motor power 0.75 kW Lifting motor power 0.8 kW Brake type Electromechanical Travel speed with/without load 3.5 / 4.5 km/h Weight 130 kg Dimensions 1300 × 550 × 1300 mm