Used Assfalg Edge Milling Machine, Bevelling Device, Deburring Machine for sale (71,503)

Condition: good (used), Year of construction: 1995, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine Ledpfx Aascg Al Sozsrt -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Condition: ready for operation (used), Year of construction: 2010, I sell edge sanding machine with milling head STEMAS. 1 pc. Milling head manual adjustable 3 pc. Edge sanding heads tiltable Automatic feeding Return band conveyor for elements Lrsdpjxznq Djfx Aazst Spare sanding bands included. Available immediately.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode Lrsdpfjztl Scjx Aazjt - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor Ljdpfx Aaopyk Nbszert -Manufacturer: Perske, milling motor type KN 71.14/2 with bracket -Power: 3 kW 2880 rpm -Voltage: 380V / 50Hz -Receiving shaft: Ø 30 x 70 mm -Tool: max. Ø 440 mm -Dimensions: 700/570/H480 mm -Weight: 100 kg

Condition: used, Year of construction: 2000, Used Machine Year of manufacture: 2000 Features and Technical Specifications: Lrsdjzw N Euspfx Aazot - For vertical edge processing with edge thicknesses up to 3 mm - With automatic milling feed - With base frame - Electrical connection: 230 V - Compressed air connection: min. 6 bar - Workpiece thickness: max. 45 mm - Tool: r = 2.5 or r = 3

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW - Space requirement: approx. W 550 x D 500 x H 700 mm Lrjdpfjd Af Shex Aazst - Weight: approx. 65 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz Lrjdpfx Aaob A Rzvszst -Voltage: 380 volts -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Lredpfx Aaeb A Nl Uozet -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit - Precision workpiece guidance - Robust welded steel construction - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach Lredpozpblqofx Aazet

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2011011, Edge grinding machine, Montresor model Lola 1000 8+6 SX • Belt running direction: LEFT to RIGHT, year of manufacture 2011 #2011011 • 8 end-face grinding supports, 130 & 150 mm, with vertical oscillation • 1 lower and 1 upper chamfer milling support • 2 pneumatic lower and 2 pneumatic upper chamfer supports • Belt infeed: Calibration/profiling support • Belt outfeed: Water nozzle support • Table extension console, extended • Machine footprint approximately: 610 x 180 cm • Infeed and outfeed path, each 250 cm Price: • EXW at the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of shipping readiness. Warranty: • Machine sold as is, excluding any warranty claims. Ledpfx Aajzwx Hujzjrt Inspection: • Possible at the operating site near Passau. Availability: • After delivery of the new machine in December 2026 / January 2027.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz Lrodjb A Igpjpfx Aazet -with indexable insert milling cutter -Number: 3x motors available -Price: per piece -Weight: 6 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Motors: some with right-hand or left-hand threads Lrsdpfx Ajb A Nnaeazjt -Number: 9 motors available Price: per piece -Weight: 3 kg/piece

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Lsdpfx Aajwtd Dyszsrt Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Machine weight: kg Lrodjx S Dxbspfx Aazot Standard configuration Extended machine accessories

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2170112, spindle speed (max.): 1,650 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,000 mm, For sale is a Kärcher ROBO 30 pipe drilling and milling machine, manufactured in 2012. Motor power: 1.85 kW Compressed air: 6 bar The ROBO 30 is designed for the quick and dimensionally accurate machining of pipes, flat material, and profiles. The self-centering clamping device allows different workpieces to be quickly and precisely clamped and machined. The machine enables angular drilling and milling operations and is particularly suitable for the production of railings, handrails, and similar structures. Ledjzyntpepfx Aazort Inspection is possible by appointment.

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Perske, milling motor for edge processing machines -Power: 0.15 kW 11160 rpm at 200 Hz Lredpfsl Dvuaex Aazjt -Voltage: 133 volts -Recording shaft: Ø 15 x 17 mm / M12 -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. Lrjdpfx Aaozuykvszst (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm Lsdpfx Aob A Nm Usazort -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Condition: excellent (used), Holzmann FS 200SF Professional Woodworking Machine – Made in Austria For sale: Holzmann FS 200SF woodworking machine, manufactured by the Austrian company Holzmann Maschinen. Reliable and robust equipment, ideal for professional woodworking workshops or carpentry businesses. Technical specifications: Model: FS 200SF Manufacturer: Holzmann Maschinen (Austria) Voltage: 400 V / 3 Phase / 50 Hz Lodpsyq Nzdjfx Aazsrt Motor power: 3.8 HP (continuous – 100%) 5.3 HP (S6 duty cycle) Condition: Good working condition, well maintained and ready for use. Key features: Robust industrial design Powerful 3-phase motor Reliable Austrian engineering Suitable for professional woodworking applications

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Ledpjy Iu N Asfx Aazsrt Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 289, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 810 mm, feed rate X-axis: 1,100 m/min, feed rate Y-axis: 1,100 m/min, spindle speed (max.): 2,800 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, total height: 2,245 mm, total width: 2,470 mm, table width: 700 mm, table length: 1,200 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, rotational speed (min.): 45 rpm, table load: 1,500 kg, overall weight: 3,700 kg, input voltage: 400 V, workpiece weight (max.): 1,500 kg, distance table to spindle center: 775 mm, input current: 16 A, input frequency: 50 Hz, Equipment: documentation/manual, Universal vertical boring and milling machine BoKö MF1, from a model-making workshop. In good, fully functional condition. Primarily used for processing plastics. Lrsdpfx Aoz Ehbujazet Rotary table for workpieces with a diameter of up to 1900 mm. Retrofitted 3-axis digital display. All original documents since purchase are available: scope of delivery, circuit diagrams, technical drawings, brochures, price lists, etc.

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Lredjzmt U Ejpfx Aazst

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz Lodpfx Aou Rv Rxoazert -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 0.6 kW 18000 rpm at 300 Hz -Shaft mounting: Ø 16 mm L 10 mm -Number: 2x motors available Lsdpfsb A Nx Eox Aazsrt -Price: per piece -Weight: 3.3 kg

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Motor: 3 kW 1720 rpm -Shaft holder: Ø 30 mm Lrsdpfx Ajcm Slkjazjt -Price: per piece -Number: 1x available -Dimensions: 910/290/H190 mm -Weight: 58 kg