Used Buhrs Envelope Inserter for sale (2,082)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: Bwedjyuuzdopfx Ab Djt • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: like new (used), amount 1 Set For sale is a package of KERN cutting inserts. Some are new and some are slightly used. Bodpeyr Si Tsfx Ab Djwt Year of manufacture unknown. 50 pcs. -> F3 3947 0029904 HP25A 30 pcs. -> F3 3943 pcs. -> F3 3943 pcs. -> KERN KG – Diverse

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device Bwsdpfowzmu Rex Ab Dot MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) Bodpfsvuw R Rjx Ab Djwt - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Bwedpfjxacbusx Ab Det Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, amount 5 STK A package of Wohlhaupter indexable inserts is being sold here. F04-HC-P25-M15-K15-R0.5 - 5x packs Bwodpfx Ajx Srzkeb Det

Condition: good (used), amount 16 STK A package of LMT Fette & Kieninger indexable inserts is being sold here. Please refer to the photos. Bwjdex Sr Auopfx Ab Dot 10 pieces + 6 pieces in a set

Condition: like new (used), amount 15 Packungen A package of LMT Fette indexable inserts is being sold here. Bwsdex Sr Azjpfx Ab Dot - 10542247 - 15 packs, see photos

Year of construction: 1998, condition: used, Technical details: pipe system - processing diameter: - mm pipe system - inlet: - mm Bwjdpfsw Awwfox Ab Djt volume flow ventilator - shred: - m³/h connection electric: 400 V Air volume: 2700 m³/h filter surface area: 52,5 m² volume: 18,7 L max. temperature: 50 Grad operating pressure: -/+ 0,1 bar weight of the machine approx.: 1250 kg Pressure max.: 5 bar dimensions L x W x H: 2,3 x 2,35 x 2,8 m Extraction of fibers - Reduction of spillage in transport containers, eg. Big Bags. / YOM approx. 2010 delivery scope: Suction fan Manufacturer Dantherm Filtartion, type T 0,56-224 RD0 D1, air supply quantity 2600 Nm³ / h, suction nozzle Ø 150mm to Ø 100mm, blow-out nozzle Ø 130mm to Ø 100mm Chip separator Two doors with attached air filter, door opening W x H: 1000 x 1960mm, interior space W x D x H: 1200 x 1160 x 1950mm, with filter attachment 1100 x x1100 x 350mm, filter surface 1200 x 1200mm, 2pcs filter (filter mat) 1200 x 600 x 50mm, insertion nozzle dia. Ø 100mm, with clamping bag attachment Optional accessories: -div. clamping bag -div. connecting tubes Ø 100 x 1000mm -div. connecting tubes Ø 100 x 300mm -div. connecting tube Ø 100 x 320mm -div. angle connections Ø 100mm -div. bayonet catches for pipe connections i.D. *

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Bodpfswwmkdjx Ab Dswt Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, mileage: 560,750 km, power: 375 kW (509.86 HP), first registration: 06/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Cab & Comfort* Cab: FH Globetrotter High Sleeper Cab (high roof, sleeper cab) * Seats: Leather seats with black & gray leather inserts, driver's seat luxury (air-suspended, heated, ventilated, electrically adjustable with memory), passenger seat comfort rest seat (rotatable, reclining) * Air conditioning: Automatic temperature control with sun sensor * Auxiliary heater: Cab auxiliary heater 2 kW * Cool box: 33 l with freezer compartment under the bed * Mattress: Pocket spring mattress, firm, with premium mattress topper * Windows: Electric windows (driver's side with automatic function), tinted windows * Storage space: Storage space under the bed, two open storage compartments, bottle holders at the rear of the bed frame * Leather armrests, leather handles, writing pad for the steering wheel, vanity/shaving mirror ----Multimedia & Infotainment * Media/infotainment: Basic system with Bluetooth (for two phones), 7'' touchscreen * Audio: Radio with multi-format (touchscreen) * 8 speakers, tweeters in the dashboard * USB and AUX connection * Integrated hands-free system * Displays: Driver information display (4''), second 9'' touch color display * Telematics: Telematics gateway with 3G and WLAN, TV/infotainment * Central locking with remote control * Cab suspension: Air suspension in the rear, mechanical in the front ----Lights & Visibility* Light package Plus * Bi-Xenon headlights * LED daytime running lights (V-shaped) * LED fog lights * LED taillights * Headlight cleaning system * Marker lights at the rear and on the sides * Fifth wheel coupling lighting (LED white) * Interior lighting with dimmer and red night light * Rain sensor for windshield wipers * Rear view camera: Digital, heated lens, automatic lens protection, preparation for additional camera * Sun visors: Internal electric, side driver's side, external * Batteries: Battery indicator in the display ----Safety & Assistance Systems* Airbag: Driver airbag in the steering wheel * Active safety: Active Safety package * Adaptive cruise control (ACC) with collision warning * Emergency braking function * Lane keeping assist * Lane change assist * Driver alert system (fatigue detection) * Immobilizer: Transponder in the key ----Engine & Drive* Engine: 6 cylinders, 12.8 l displacement, 510 hp/375 kW, 2,550 Nm, Euro 6 with SCR, particulate filter and exhaust gas recirculation * Transmission: I-Shift AT2612F, automated 12-speed transmission (direct gear) * Electronically controlled braking system (EBS), ABS, ESP * Automatic impulse parking brake * Engine brake VEB+ * Air suspension: Front and rear axles, electronic level adjustment, three ride heights * Brakes: Disc brakes ----* Fifth wheel coupling: Height-adjustable, Jost JSK 37, plastic sliding plate -----* Tire dimension front axle: 355/50R22.5 * Tire dimension rear axle: 295/60R22.5 * Fuel tank: 475 + 445 l * AdBlue tank: 65 l * Technically permissible total weight: 19000 kg * Curb weight: * Permissible trailer load: * Overall length: * Wheelbase: 3700 mm * Inspection due: ----Vehicle number: 12372----Errors and prior sale are subject to change----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection, complete export processing, ar Bwodpfx Abezrrh Io Dot

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-260017, The FICEP Tipo G31 sheet metal processing center for the cost-effective processing of steel sheets and flat steel in the steel construction and steel trading industries. The Ficep Tipo G31 LG can drill, center-punch, tap, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting. The CNC-controlled sheet metal processing center is equipped with 2 drilling units, each with 26 kW of drive power. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. This system is suitable for sheet metal sizes: sheet width: minimum 200 mm, maximum 3,100 mm; sheet length: minimum 2,500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma power source is available for plasma cutting. In addition, the system features an oxy-fuel cutting unit for thick materials. The drilling unit, with high torque and a spindle speed of up to 6,000 rpm, is designed for drilling with carbide tools such as solid carbide drills, Kennametal drilling tools, Nenok Multiplex indexable insert tools, as well as for use with HSS coolant-channel drills with diameters ranging from 10 mm to 40 mm. Bedpfsznh R Rex Ab Dowt The Ficep Tipo G31 sheet metal processing center is in very good condition and has only a few operating hours.

Condition: used, maximum load weight: 12,980 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,710 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,180 mm, Year of construction: 2016, Vehicle No. G0123199 – Manufacturer: Krone. * Simple corner brackets * Insertion bar (aluminum) * Rear contour marking * Mechanical lift roof * Pallet stop bar * Portal door with double rotating bar locks (inside) * Side sliding tarpaulin * Forklift-accessible * Device for rail loading * Lashing recesses * Lashing points * Perforated pallet stop bar Bwodpfxeznixio Ab Djt Storage container – weather-resistant, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Multi-Lock outer frame. Tarpaulin/roof tarpaulin used/labeled, with repair spots, partially damaged (see photos). Tarpaulin used. Substructure with signs of use, partially with rust. Isolated paint chipping on components of the swap body. Isolated rust on components of the swap body. Deformations/stops on components – see images. Swap container with labeling (see photos). Dimensions are approximate. Offer subject to change; subject to prior sale. Prices are net ex works D-59302 Oelde. Further details available upon request via telephone or email.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm Bwjdpfszqywzsx Ab Det -Weight: 30.9 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Face milling cutter: cutter head Bwjdpfxjzqyw Io Ab Djt -Type: UER 200-1-12 -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 200 x 62 mm -Weight: 8.7 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Widax, face milling cutter head diameter 315 mm -Cutter head: Widia type WIDAX M45 Ø 315 R 16 -Number of teeth: 16 -Hole: Ø 60 mm -Dimensions: Ø 335 x 78 mm Bwjdpfx Abozqzqce Dst -Weight: 38.5 kg

Condition: used, power: 120 kW (163.15 HP), first registration: 08/2012, fuel type: diesel, color: orange, empty load weight: 5,990 kg, driver cabin: other, gearing type: other, Year of construction: 2012, operating hours: 4,850 h, number of seats: 2, * Compact sweeper CLEANGO, standard configuration for Germany, 50 km/h * Speed 50 km/h * Disc brakes on the front axle with dual brake calipers * Proportional parking brake * Load-dependent valve on the rear axle (required for all 50 km/h machines) * Driver's seat with air suspension * Seat belts * Radio with USB and SD card connection * Heated exterior mirrors * Additional work mirror * Colored rear view monitoring system with TFT monitor * Air conditioning * Tachograph * Cup holder * Independent control of the rotary brush (raise/lower, ground pressure, inclination) * Third front brush Cleango 500 * Weed brush for the 3rd brush * Additional work light (for the 3rd brush) * Suction nozzle with rubber insert * Suction pipe with rubber insert * Preparation for subsequent installation of the hand suction hose * Water return system Cleango 500 * Container door with high and low-level water drain valves (top and bottom) * Water filling hose, Germany * Standard paint RAL 2011 municipal orange * Noise reduction package (only for exhaust fan) * Automatic central lubrication system instead of manual central lubrication * Protection for the rotating beacon * Oil service and maintenance performed at 4,850 operating hours Bsdpfx Abszcfzwe Djwt Other: * Trade-in and purchase of vehicles and machines possible. * Selling price excluding transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer is non-binding. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: Bsdpfx Ajzlbrvjb Djwt - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: like new (used), functionality: fully functional, This is a tray rack from the premium manufacturer Rational, suitable for the iCombi Pro/Classic combination steam ovens, size 20-2/1 GN. This tray rack comes from a training area and has 17 x 1/1 GN inserts with a rail spacing of 74mm and is in almost new condition. The recommended retail price (RRP) including VAT is: €3,184, our special price: €1,725 including VAT. You will receive an invoice with VAT shown separately. Service: We will be happy to assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new products. We will be happy to advise you on all appliance types. Our used equipment service for you: * 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. * High-quality branded equipment at fair prices. * Professional overhaul/inspection and expert cleaning. * Tested and fully functional - or your money back. * Flexible shipping or self-collection options. * Competent advice - before and after the purchase. * Provision of operating instructions, connection diagrams & spare parts. * Inspection according to DGUV V3. Technical data: * W x D x H: 772 x 1742 x 1013 mm * Clearance from the lowest insert to the oven opening: 118 mm * Clearance from the highest insert to the oven opening: 148 mm * Max. insert height: 1.60 m * 17 inserts * Max. load capacity: 180 kg * Max. load capacity per insert: 30 kg Bodpfey Aui Eex Ab Djwt * Design with container locking mechanism * Can be loaded from both sides * Tip protection when pulling out the containers using U-rails * 4 tandem swivel casters (2 with parking brake - metal parts made of stainless steel) * Drainable and removable drip tray * Rail spacing 74 mm * Removable handle * Material: Stainless steel * Article number: 60.22.396 Capacity: * 2/1 GN baking and roasting trays 17 x * 2/1 GN grids 17 x * 2/1 GN 20 mm deep 17 x * 2/1 GN 40 mm deep 17 x * 2/1 GN 65 mm deep 17 x * 2/1 GN 100 mm deep 8 x * H6-1/1 (up to 1,800g) chicken - superspike 12 x * H8-1/1 (up to 1,300g) chicken - superspike 12 x * Use of other containers: 2/4 GN, 1/1 GN Condition: used, fully functional Shipping: * Delivery or self-collection by arrangement * Worldwide shipping on request * Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to view something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively subject to our general terms and conditions (GTC).

Condition: used, Meat without bone, sausages, cheese or fish. Max. deposit length: 1.000 mm Max. Diameter deposit: (l x w): 320 x 130 mm Max. slice thickness: 0,5 – 25 mm Max. number of slices per minute: max. 2.640 Min. product temperature: - 4°C overall dimensions (l x w x h) : ± 2.519 x 962 x 2.137 mm + Scale + Bodpozk Dxisfx Ab Dewt Insert belt

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Bsdpfjzp Nv Dox Ab Djwt Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, Bodpfx Ajy Saurob Dowt 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: new, overall weight: 36,000 kg, next inspection (TÜV): 09/2026, loading space length: 13,830 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Curtain Master MEGA White aluminum Dimensions and Weights Overall length 13830 mm Platform inner length 13620 mm Overall width 2550 mm Platform inner width 2480 mm Inner width between posts 2480 mm Inner width between longitudinal beams (without lifting roof) 2480 mm Lateral loading height with lifting roof and inner height 2850, 2785 mm Axle distance 1310 mm Saddle height 950 mm Kingpin height 80 mm Platform height 1030 mm Distance from kingpin to 1st axle 6390 mm Number of Euro pallets 34 pcs Technically permissible gross weight (administrative) 36000 kg Technically permissible gross weight 42000 kg Technically permissible axle load (administrative) 8000 kg Technically permissible axle load 9000 kg Technically permissible saddle load 15000 kg Manufacturer designation NS3K nd Accuracy +/- 4% nd Unladen weight 6560 kg TECHNICAL DATA Chassis Lamp bracket made of steel 371 mm Pallet stop with lashing eyes Wielton side impact protection, white solid filling Rear underrun protection, fixed Steel rear underrun protection Floor made of screen-printed plywood, 30 mm, load capacity 7.5 tons Perimeter frame with continuous lashing points for securing the load, SAFETY LOCK system, 50 to 67 per side depending on the model Steel buffer at the rear Axes and Suspension Number of axles 3 Rigid axles Saddle height 950 BPW disc axles 3x 9000 kg, 19.5 ECO PLUS, 3 clamps, BPW, ET=120 1st lift axle Support legs 2-speed geared support legs, full load (BPW Gen2 FL/SAF Hercules) Fenders PVC fenders, shell, 2 front, 6 rear Rims 6x steel rim 19.5-14 ET-120 Tires 6x ALL-ROAD Premium tires 445/45/R19.5 (Goodyear) Other chassis equipment Two wedges with mounting Customs rope/tarpaulin rope on the front wall (no customs seal) 1 extendable rear ladder 2 identification plates on the rear panel 565x200 ECE-R70 Bwsdszx Iqropfx Ab Djt Body Inner height 2950 Insert strips - 4 rows 1st row, aluminum overlay strips, H=100 mm, 8 pcs Sliding roof Edscha HYBRYD (0, +50, +100, +150) and 450 for loading, roof can be moved forward and backward independently of the side tarpaulins Side tarpaulins with 24 tarpaulin tensioners Aluminum front wall Front wall impact protection (metal plate) H=1500 mm 2nd row, aluminum overlay strips, H=100 mm, 8 pcs 3rd row, aluminum overlay strips, H=100 mm, 8 pcs 4th row, aluminum overlay strips, H=100 mm, 8 pcs Tarpaulin quick tensioner at the front Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Tarpaulin tensioner with additional locking mechanism Sliding tarpaulin that can be opened on both sides EDSCHA HYBRID Rear wall as an aluminum double-wing door Braking system/pneumatics Braking system Wabco with Basic Modulator with RSS/RSP Steel air reservoir Chassis painting Chassis painting RAL 7021 (black gray) KTL coating Tarpaulin color Side tarpaulin color Polplan 018 RAL 9006 (silver) Electrical system 2x7-pole + 1x15-pole with EBS connection, without connection cables to the central unit Lighting LED Aspöck-EUROPOINT III with flashing side marker lights Additional systems The system has been developed for semi-trailers and trailers and is used to monitor the tire pressure and tire temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Version DC 9.5 design Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Designation in German Certificates/Homologation Certificate f

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher Bwodpsk Abnvefx Ab Det several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. Bedpozx Eftofx Ab Dswt The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.