Used Stefani 2008 Stefani Solution 8000 for sale (7,948)

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Pgsdpfx Agoyluics Ajr Without software/PC

Condition: ready for operation (used), Year of construction: 2005, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2005. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7. 000 rpm, max. Back-spindle power: 3,5 kw Pgedoyi Eihspfx Ag Aor • Gang rotary tool: 5 fixed tools + 4 driven tools • Turret tools: 10 positions • Bar feeder: iemca boss 332 e/r type 37ll - year 2008 • Equipment: chip conveyor

Condition: excellent (used), Year of construction: 2008, operating hours: 40,255 h, functionality: fully functional, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal travelling-column machining center. The machine was built in 2008 and was modernized / totally retrofitted in 2022 with Siemens Sinumerik 840D Solution Line control. Equipped with 5-axis simultaneous machining license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel and electronic handwheel. Technical data: Manufacturer: DMG DECKEL MAHO Type: DMF 220 linear Machine type: 5-axis universal machining center / travelling-column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Total Retrofit: Siemens CNC / drive modernization in 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool taper: SK 40 Table load: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Fuse protection: 125 A Supply voltage: 400 V Frequency: 50 Hz AC control voltage: 230 V DC control voltage: 24 V Power-on hours: approx. 40,255 h Spindle / working hours: approx. 13,082 h CNC / drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP control panel: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / licenses: 5-axis simultaneous machining license Axis licenses Operator software license Equipment: Integrated swivelling table / trunnion-type table setup Pgjdpeyuzg Hjfx Ag Ajr Paper band filter unit Coolant / filter unit Electrical cabinet Full enclosure Working area lighting Siemens control panel Condition: Machine in well-maintained condition Modernized Siemens control and drive technology 5-axis simultaneous machining available

Condition: excellent (used), Year of construction: 2003, A Weland Compact Lift 2440 is now available for sale. The machine has been kept in a clean, well-maintained environment and receives annual servicing, making it reliable for many years to come. It has completed approximately 50,000 cycles so far. Typical usage is around 10,000 to 20,000 cycles per year, so this machine has seen light use. Pgjdpfexpuyujx Ag Aor The lift is 6,000 mm high, but the height can be adjusted as needed. It is a Vertical Lift Module (VLM) that works well in warehouses with changing storage demands and can be shortened if required. The VLM is equipped with 25 trays, making it ideal for storing taller items. Additional trays are available from Relevator if needed. Manufacturer: Weland Solutions Year of Manufacture: 2003 Model: Weland Compact Lift 2440 Height: 6,000 mm (adjustable) Width: 2,950 mm (lift) / 2,440 mm (tray) Depth: 2,950 mm (lift) / 820 mm (tray) Number of Trays: Approx. 25 per lift Maximum Load per Tray: 400 kg Electrical: 400V, 25A

Condition: good (used), Year of construction: 2019, Nicotra Gebhardt P2M Process Air Fan Direct-drive, clutchless, single-inlet fan Robust industrial designs Durable, easy to maintain High efficiency, quiet operation Customized solutions at a standard price Certified and assured quality according to ISO 9001 Technical data measured according to DIN 24163 Accuracy class 2 according to DIN 24166 Volted casing Robust welded construction Casting positions in 90° increments Customized installation position Central impeller Impeller diameter 500 mm Backward-curved blades Welded Dust-resistant Pgjdjxl Sr Tspfx Ag Ajr Materials: Coated steel, hot-dip galvanized, stainless steel 1.4307 ATEX: Category 2 and 3; Gas and Dust Manufacturer: Nicotra Gebhardt Flow rate: 8000 m³/h dPt: 1070 Pa Density: 1.2 kg/m³ Tmax: 80 °C n: 1460 rpm n max: 2511 rpm PW: 3.10 kW Ins/Eff = B/total N (13/15): 61/64 ETA opt: 71.8 N actual: 76.4 Motor power: 4 kW Directly flanged drive motor Mains connection: 400 volts 50 Hz Weight: 195 kg Year of manufacture: 2019 Find more items - new and used - in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, input voltage: 400 V, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, rotational speed (max.): 6,000 rpm, overall weight: 710 kg, Equipment: CE marking, saw blade guard, Rod guideways – a solution previously found only in top-tier machines, now available as standard Slide table made of aluminum equipped with hardened guideways ensures smooth and precise movement Table extension and widening as standard – ideal for supporting large sheet formats Robust support table enables processing of heavy and large panels without the need for additional support Powerful drive motor guarantees maximum cutting performance, even during intensive continuous operation Pjdpfxoyt I Aro Ag Aegr Easy angle reading set directly on the handwheel – comfort and precision in adjustment Scoring unit with independent motor included as standard Extendable telescopic stop (up to 3100 mm), mountable at the front or rear of the support table – flexibility and convenient handling Stable saw unit ensures precise, clean cuts without vibration Machine body with reinforced, stable design made of steel and grey cast iron combination – ensures durability, rigidity, and precise operation even under heavy load. Parallel fence with a robust, round 40 mm guideway – the tilting option makes material loading easier Workspace – minimum required floor area is 5 × 6 m Technical specifications Table size – length: 935 mm Table size – width: 620 mm Sliding table length – panel/roller: 3200 mm Sliding table width – panel/roller: 370 mm Sliding table, carriage type: Panel Edge trimming length / table movement: 3200 mm Blade size: 315 x 30 mm Max. cutting height 90°: 90 mm Max. cutting height 45°: 65 mm Cutting width with guide: 1295 mm Working height: 850 mm Table extension: 600 x 615 mm Table widening: 900 x 600 mm Extension table: 1210 x 860 mm Main saw rotation speed: 4000 / 6000 rpm Scoring saw rotation speed: 8000 rpm Scoring saw size: 120 x 20 mm Extraction port Ø: 100 mm Motor power: 5.5 kW Motor power S1 100%: 4 kW Scoring unit motor power: 0.75 kW Voltage: 400 V Dimensions – width: 3445 mm Dimensions – depth: 3560 mm Dimensions – height: 1570 mm Weight approx.: 710 kg

Year of construction: 2008, condition: used, Labelling Machine / Marking System SRD Stano-/Alone-Line Features: * Used labelling machine with integrated marking system * Very robust construction * Condition: fully functional with signs of use * Ideal for fast material handling * Professionally dismantled and packaged Year of manufacture: 2008 Pgodpfx Ageyfgp Uo Aor Technical Data: Manufacturer: SRD Model: Stano/- Alone-Line Unit: Valentin SPE 106/12 Internal article number: 2026012704 Semi-automatic marking system for image and audio media Refer to the operation manual, wiring diagram, and pneumatic diagram for details Tailor-made solutions for your intralogistics. Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your competent partner! We are happy to provide you with a custom quote or assist you with planning or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and excellent network of professionals. We have successfully completed projects for companies from various industries, such as logistics, pharmaceutical, trades, and electronics. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can also supply fully automated sorting technology or additional components such as picking racks or containers.

Condition: good (used), Pump control for centrifugal pumps, high-pressure pumps, water pumps, multi-stage vertical centrifugal pumps, control units, comfort control technology -Manufacturer: Wilo, control unit with control board / control card -Control device: Type CR system -Control card/board: 7022034.3 CR-LP-N 002 008 008 -Shipping/Price: complete -Dimensions: 270/230/H90 mm -Weight: 2.1 kg Pjdswya Egjpfx Ag Aegr

Condition: new, functionality: fully functional, Year of construction: 2016, Electric chain hoist with trolley, explosion-proof, type STK2008-10 1.6 4/2 - 1 ex, lifting speed 0.80 / 5.00 m/min, lifting height 4,500 mm, load capacity 1,600 kg Pgodpsxcx Dqjfx Ag Ajr

Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available. Pgsdpfx Agjw Hdzlj Asr

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console Pgsdpfxohzbi Nj Ag Aer

Condition: used, 800040V1444, T1600, Oerlikon Leybold, turbomolecular vacuum pump Pedpfxjvrgd Ij Ag Asgr

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 230 V, 16 A Pgodpev Tx Uzjfx Ag Ajr Belt width: 680 mm and (6x) 320 mm Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm.

Condition: ready for operation (used), Fanuc A06B-0651-B095 DC Servo Motor Model 10M SN:Y-620085, used, normal signs of use, 100% functional, scope of delivery as per photos Pgsdpfx Ajvyb Azjg Aor

Condition: good (used), Year of construction: 1999, Lg 33922 Podpfxshuwaco Ag Aegr Unwinding and guiding unit SOPREM BRH 7-200-80U-1250 BAP Web width: max. 200 mm Coil weight: max. 1,250 kg Spreading range: approx. 380 to 430 mm Coil outer diameter: max. 1,300 mm Web thickness: approx. 0.8 to 3 mm Working direction: from right to left

Condition: used, mileage: 380,457 km, power: 338 kW (459.55 HP), first registration: 04/2016, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 2,650 mm, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, electric window regulation, fridge, spoiler, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Drivetrain Drive: Wheel Make of engine: DAF Axle configuration Front axle: Tyre size: 385/65R22,5; Suspension: leaf suspension Rear axle 1: Tyre size: 385/55R22,5; Steering; Suspension: air suspension Pjdpfjuc Ex Tox Ag Asgr Rear axle 2: Tyre size: 315/70R22,5; Double wheels; Suspension: air suspension Weights Empty weight: 9.105 kg Carrying capacity: 16.895 kg GVW: 26.000 kg = Additional options and accessories = - Roof spoiler

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS10157V Pgedpfod Hydhjx Ag Asr CMYK, LC, LM + white + varnish option included Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing: bottles/round objects (additional cost) A1+ size 100x150 cm and 170 mm printing height 8 x 500 ml ink can be supplied! (additional cost) + VARNISH FUNCTION included Software settings and printer explanation available on request. Available throughout Germany/Europe. (additional cost) Printing videos, etc. can be sent by email/WhatsApp upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers – it can also print in color on glass, wood, textiles, plastic, metal, and many other materials. Pedpfx Asga U Taog Asgr New model: PS1612 C M Y K LC LM + White + Varnish or with double CMYK + WWWW (White) + VVVV (Varnish) Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: approx. 240cm (L) x 160cm (W) Weight: 650kg Print area: 1600x1200 mm with a print height of 150 mm.

Condition: good (used), Year of construction: 2008, Features: * Used belt conveyor * Color: light gray * SEW geared motor included * Feet must be ordered separately * Material: steel * Ideal for fast material transport * Professionally dismantled and packaged * Condition: fully functional * Price per unit Technical Data: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of manufacture: 2008 Overall length: approx. 1,800 mm Overall width incl. motor: approx. 850 mm Overall width without motor: approx. 800 mm Belt width: approx. 700 mm Belt type: smooth / green Frame height: 170 mm Belt Conveyor Pgsdpfjikl U Usx Ag Aor The belt conveyor is ideally suited for the picking area to connect machines or workstations and optimize internal processes. During transport, the belt conveyor can move sensitive and differently sized containers, boxes, or other packaging and article units to the loading or unloading point and can also serve as a connecting section before or between production and processing machines. Furthermore, it enables efficient part transport within the factory and warehouse and is used for conveying significant quantities and distances. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers.

Year of construction: 2008, condition: good (used), Features: * Used belt conveyor * Color: light gray * Includes SEW motor 0.75 kW * Feet must be ordered separately * Material: steel * Ideal for fast material transport * Professionally disassembled and packed * Condition: fully functional * Price per unit Technical data: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of manufacture: 2008 Overall length: 2,100 mm Belt width: 400 mm Belt type: directional grooves / black Frame height: 170 mm Belt conveyor The belt conveyor is ideal for linking machines or workstations in the picking area and optimizing internal processes. During transport, the belt conveyor can transport sensitive and differently sized containers, boxes, or other packaging and article units to the collection or delivery point, and can also serve as a connecting section before or between production and processing machines. Furthermore, it enables efficient parts transport within the company and warehouse and is used for the transport of significant quantities and distances. Tailor-made solutions for your intralogistics Podpfx Agjikrmns Ajgr For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will be happy to create your individual offer or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Podpfx Ajicic Hog Asgr Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: ready for operation (used), Liebherr B 814C8000-01 AKAGS circuit board, serial number HO061, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Psdpfx Agsi Eby De Asgr

Condition: good (used), functionality: not functional, space requirement length: 8,000 mm, space requirement width: 4,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 2,000 mm, total width: 2,100 mm, total length: 5,000 mm, type of input current: three-phase, input voltage: 400 V, power: 22 kW (29.91 HP), shaft diameter: 127 mm, DRAIS" TYPE S8000 double ribbon mixer - Tank capacity approx. 8000 L. Tank: stainless steel construction L x W x H = 3350 x 1800 x 1800 mm Machine sold without motorization but with partial coupling to keep or change Recommended gear motor not supplied 3 x 400 V- 22 KW - 10 rpm - Torque 60940 Nm Central drain at 500 mm Podeu D Ihvepfx Ag Asgr Sealing by stuffing box Shaft diameter 150 mm Stainless steel cover Product feed via trapdoor 500 x 300 mm - 4 nozzles diameter 80 mm + 1 nozzles diameter 100 mm and two 150 mm diameter lights Overall dimensions L x W x H = 5000 x 2100 x 2000 mm approx.

Condition: excellent (used), Weishaupt G50-8000kw gas burner Pjdpfx Asu I Ry Neg Aegr

Condition: good (used), Absolute encoder, incremental encoder with solid shaft -Type: 127 BA Series: 71 Price: per piece Quantity: 5 available Pgjdpfx Agsb A Sf Ao Aer -Weight: 0.5 kg