Used Tmg Temperature Sensor for sale (11,148)

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW medium: water up to 200°C Max. external volume: 43 ltr at 200°C max. Flow rate: max. 230 l/min  max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions LxWxH: 1,460 x 525 x 1,200 mm  Weight approx. 330kg Circulation medium connection: flange DN40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: Tjdpfx Alsg Ey T Ee Aoc -Control and regulation Smart Controller (7" touch display) -Heating control via solid-state relay -Control box IP54, externally ventilated -Expansion tank, heater and piping stainless steel -Heating via stainless steel tubular heating elements made of Incolloy -Dirt trap (circulation) -Unit ready for connection and mounted on castors, 2 of them steerable and with brake -Cooling and filling controlled by solenoid valve -configurable automatic filling via KW inflow or separate connection (factory-supplied via cooling water inflow) -flow measurement by differential pressure principle -Level monitoring by magnetic float switch -automatic temperature-dependent system closure (not with WP7-90) -flow monitoring by recording the flow rate -Bypass between flow and return with reduced cross-section -dirty filter in the cooling water inflow, filling and return of the circulation system -Continuous bypass of the heat exchanger via 3-way motorised control valve (WP7-180/200) -System pressure monitoring via pressure transmitter in the AD tank (WP7-150/180/200) -Pressure booster pump for system filling (WP7-180/200, otherwise optional) -Safety temperature limiter (STB) in the heater and flow (WP7-200) -Pressure gauge in the supply line on the back of the unit -heat-insulated circulation circuit (WP7-150/180/200) Visit our website for more details or for other performance classes. *This unit is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Tjdog Ezarspfx Al Ajc Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Probing System with Optional Probe Package: Renishaw TP20 probing system installed Tedpfx Aeglp Nqol Asc Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: good (used), Buderus 825 M-2500kw. Low temperature boiler Tedpfju I Ruaex Al Aoc

Condition: like new (used), Year of construction: 2013, Heating water boiler, low-temperature boiler BABCOCK WANSON MODEL: HW3P Output: 1985 kW Todpfx Asianacjl Aec Year of manufacture: 2013 In very good overall condition; minimal operating hours. - Price is negotiable. - Delivery is possible upon request. - All technical specifications can be seen in the images. Preferential sale to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors.

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. Todpfx Alepbv Hgs Ajc - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: ready for operation (used), ipf PT700523 / 50115802 Laser Sensor SN: 13070501 68 009, used, good condition, 100% functional, scope of delivery as per photos Tjdpfx Aep Illwjl Aec

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, table load: 20 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, High-precision optical measuring device with active vibration damping for use close to production. Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! Factory-refurbished premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agent, worldwide. Online - optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: - delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rent-hire purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements Measuring range of individual sensor: 250x200x200mm Measuring range of all sensors: 250x200x200mm Factory overhaul (Mahr Competence Center): 2024 New Windows 10 evaluation station Software: OptiCheck3D Version 4.5 Ultimate Maximum workpiece weight (glass plate): 15kg Scale resolution: 0.1μm Maximum speed: 150mm/s Dimensions: 800x700x1980mm Weight of measuring device: 450kg Weight of control: 90kg High-precision CMOS camera for digital measurements Renishaw TP20 touch probe system with SF insert module Tedpfx Aedzzqwjl Aoc Accuracy according to VDI/VDE 2617 Sheet6, ISO 10360-2: U1=1.9 + L/200; U2=2.4 + L/150 ####Symbolic image of the manufacturer####

Condition: ready for operation (used), Micro-Epsilon optoNCDT laser distance sensor ILD2300, used, in good condition, 100% functional, scope of delivery as shown in the photos. Todezp Az Tspfx Al Ajc

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Hersteller: GAMMAFLUX Tjdpsyxxz Djfx Al Aoc Typ: GS1G030F024S4EJ Baujahr: 2019

Condition: new, New safety light curtain from REER. Original packaging included. The set consists of a transmitter (emitter) and a receiver. (REER) Tedpszcgyzjfx Al Asc Manufacturer: REER Product series: EOS4 Type: EOS4 3B A Device type: Safety light curtain / safety light grid Scope of delivery: Transmitter (emitter) and receiver Number of light beams: 3 Protected height: 810 mm Range: up to 12 m Restart: Automatic Safety category: Type 4 Performance Level: PL e Safety level: SIL 3 / SILCL 3 Protection rating: IP65 / IP67 Operating temperature: -30 °C to +55 °C Connection: M12 connector

Condition: new, CAPTRON sensor pushbutton two-hand control for punching and pressing machines / SCB4-185Z-S + SCA4-185Z-S + MCR-225 two-hand safety relay + LKW-SCA-5 cable socket with 5m cable + LKW-SCB-5 cable socket B with 5m cable, unused in opened original packaging, 100% functional, delivery as per photos. Tjdpfx Aoy Np Iiol Ajc

Condition: used, mileage: 127,555 km, power: 75 kW (101.97 HP), first registration: 01/2021, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 5 m³, loading space length: 2,535 mm, loading space width: 1,600 mm, loading space height: 1,360 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer inquiries: 149 Tedpfxszirzie Al Asc ----Special equipment: * Air conditioning system, controlled (Tempmatik) * Windshield wipers with rain sensor * Seats in the cab: passenger seat as a double seat * Audio system Audio 10 (DAB, Bluetooth) * Audio system Audio 10 (radio with CD player) * Exterior mirrors, electrically adjustable and heated, both sides * DAB tuner (digital radio reception) * Automatic activation for headlights * All-weather floor mats * Vehicle without lashing points * Rear door without glazing (opening angle 270 degrees) * Wooden flooring in the cargo area * Fuel tank: enlarged * Seat cover / upholstery: fabric Rawson * Seats in the cab: driver's seat plus (with level seat surface) * Interior trim in the cargo/passenger compartment: standard * Heat-insulating glazing * Two-way speakers in the front ----Standard equipment: * 3-button remote control for central locking * 3rd brake light * Adaptive brake light * Airbag, passenger side * Airbag, driver side * Hill-start assist * Anti-lock braking system (ABS) * Drive type: front-wheel drive * Exterior mirrors, aspherical, both sides * Outside temperature display * Mounting rails for roof rack * BlueEfficiency package * Brake assist * Braking system with ABS+ASR * Dome light in the cargo area * Design and equipment line Base * Electronic stability program (ESP) * Driver assistance system: Attention-Assist (fatigue detection sensor) * Driver assistance system: breakdown management * Driver assistance system: crosswind assist * Power windows, electric, 2-way * Windshield with antenna * Generator 185 A * Speed limiter (cruise control) * Transmission 6-speed - manual transmission * Cup holders in the rear * Cup holders in the front * Seat belt pretensioners * Grab handle, passenger side * Glove compartment, lockable * Body/structure: panel van * Body/structure: long * Communication module (LTE) for digital services * Bulkhead between cab and cargo area * Mercedes-Benz emergency call system * Model update * Engine 1.7 L - 75 kW CDI CAT * Fog lights, rear * Particulate filter * Wheelbase 3200 mm * Low emission according to exhaust standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right * Power steering * Safety belt system with warning system (driver/passenger side) * Steel rims 6.5x16 * Daytime running lights * Interior trim, window pillars * Interior trim in the cargo/passenger compartment: hard fiber, semi-high * Lashing rails in the cargo area - side wall to roof frame * Dry-fit battery 92 Ah * Service interval display Assyst * Immobilizer * Central locking with remote control * Permissible total weight 2.80 t ----Technical data: * Wheelbase: 3,200 mm * Cargo area dimensions: L: 2,535 mm W: 1,600 mm H: 1,360 mm * Payload: 796 kg * Tire size: 205/65R16C * Tire tread: approx. 50%-30% ----€9,999 net plus VAT * A deposit will be retained for export to third countries or EU countries. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle & does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-bin

Condition: not inspected (used), functionality: unexamined, Light curtain SICK FGSS300-1 Safety Category: Type 4 1x Transmitter 1x Receiver Supply voltage: 24V +/- 20% Tedpjzkazgsfx Al Asc Power consumption: 11 W Protection class: IP 65 Protected field width: 6 m Protected field height: 300 mm Response time: 15 ms 1x Control unit LCUX1-400 Requirement level: Type 4 Power consumption: 6 W Response time: 15 ms

Condition: used, functionality: fully functional, “functionally tested; item comes from the dismantling of equipment from an automotive supplier” Manufacturer: SICK Type: AT20E-PM111 (AX20 series) Category: Array sensor / Edge detector Function: Edge detection, measurement of diameters/widths, reflector-capable Sensing distance / Measuring range: 25 mm / Measuring range 20 mm Output: PNP / Analog (4–20 mA) depending on the variant Protection class: IP67 Temperature range: −10 … +55 °C Tjdjzh Ankspfx Al Ajc Dimensions: compact design (see datasheet) Weight: approx. 0.14 kg

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Tsdpfx Alezg Tzxj Asc Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Features: - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Todpfxoznl Duo Al Ajc Control / Security: - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 113201690006, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, This device is a component of an entire production line, which has not been in use since 2022. The entire line consists of 6 such devices, which are grouped in pairs. Each pair of devices has its own control cabinet/switchboard. The entire system is controlled from a main switchboard. The entire system, or individual components, will be sold. Tjdezt Nprspfx Al Aec

Condition: used, machine/vehicle number: 0926292, Year of construction: 2009, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Todpfxjy Su D Us Al Aec

Condition: used, Year of construction: 2009, machine/vehicle number: 090924, Temperature control unit manufactured by Single, used and untested. The device is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with an SBC control system. The medium used is water*; the maximum flow temperature is 30 °C. Heating output is not specified; pump performance is 28 l/min at 3.2 bar*. Year of manufacture is 2009, and the total weight is 105 kg. Tsdjy Su Efepfx Al Ajc

Year of construction: 1998, condition: used, Temperature range 140 °C heating capacity 6,6 kW Cooling capacity 18 kW dimensions 0,90x0,25x0,70 m weight of the machine ca. 72 kg HB-THERM HB-W 140 – Temperature Control Unit for Plastics Processing — ideal for injection molding and plastics processing facilities. Product description: The HB-W 140 temperature control units from HB-THERM (Grossenbacher Apparatebau AG, Switzerland) are proven peripheral devices for the precise temperature control of tools and machines. They are robust, reliable, and can be used with both water and oil. General Specifications - Manufacturer: HB-THERM (Grossenbacher Apparatebau AG), Switzerland - Model: HB-W 140 - Years of manufacture: 1998 Performance & Temperature Range - Heating capacity: 6.6 kW - Cooling capacity: 18 kW - Max. temperature: 140 °C Fluid - Suitable for: Water and oil - Application: Temperature control of injection molds and industrial tools Electrical specifications - Operating voltage: 380 – 420 V / 50 Hz - Connected load: approx. 7.2 kW - Rated current: approx. 11 A Pump & Pressure - Pump power: 0.55 kW - Flow rate: approx. 40 l/min - Head: approx. 60 m - Max. system pressure: 12 bar Machine Type - Industrial temperature control unit - Peripheral device for injection molding and plastics processing Tsdjzhn Tlspfx Al Aoc

Condition: like new (used), 10 - 30 V DC , 200 mA switchable, with on/off delay Length: 85 mm Diameter: 30 mm Tsdpfszfghpex Al Ajc Weight: 205 g Condition: like new

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, Schatz torque adapter, 2000 Nm in wooden crate, untested. Tedpfx Alozfxqpj Aoc

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Todpfshgfnbjx Al Aoc Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Tedehgg Rropfx Al Ajc Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana