Used Gea Niro Homogenisor for sale (2,153)

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Fodovwfxzjpfx Adcsph

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition machine cleaned, overhauled greased, function tested, trial run manufacturer Gea Fsdewbi Exopfx Adceph type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder 1 heating rail working length 3000 mm pneumatically operated mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h Fedpfx Adevhctwscoph - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 23900101, Equipment: type plate available, PACKAGING MACHINE FOR FOOD PRODUCTS SUCH AS MEAT, COLD CUTS, CHEESE, IN FILM PACKAGING UNDER VACUUM OR IN INERT GAS. THE MACHINE HAS FIVE FORMATS. I HAVE A LARGE SET OF SPARE PARTS FOR THE MACHINE: KNIVES, SEALS, VALVES, ETC. Fjdpfx Adew Emh Ejceph

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: type plate available, Two professionally disassembled compressors from the manufacturer GEA Bock. Technical data sheet available, see images. Fpjdewuvquopfx Adcjh

Condition: good (used), Year of construction: 1995, Niro-Fielder PP1 Processor - High-Shear Mixer Granulator The Equipment is in good condition and was in operation until 2017 when it was decommissioned due to production closure. Including: • 2 stainless steel mixing vessels (1 PTFE lined / jacketed) • Various accessories and spare parts Fpodpepbb S Rjfx Adcjh • Documentation: Original manual with wiring diagram Physical inspection in the Basel area is possible upon request.

Condition: excellent (used), Program-controlled pasteurizer for fruit juices and cremogenates with indirect heating and a regenerative heat exchanger circuit, including a CIP connection. Features: *Production: 30,000 l/h depending on the product. *Number of tubes: 94. *Includes Simens Simatic control panel. *Max. viscosity: 25 cp/10°C *Max. pulp percentage: 89% Fpsdewnzcpopfx Adceh *Max. fiber length: 6-8 mm.

Condition: excellent (used), Bock, Bitzer, Carrier, L'Unite, Danfoss in stock Fpedew Nf S Aopfx Adcoh

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Fsdpfx Aeyrrpyodceph Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is not dismantled, the potential buyer must include the costs of dismantling.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2212049506-010-0001, type of input current: AC, input voltage: 400 V, operating pressure: 3 bar, power: 11 kW (14.96 HP), input frequency: 50 Hz, protection type (IP code): IP55, rotational speed (max.): 2,900 rpm, volume flow: 50 m³/h, type of cooling: air, Used, completely overhauled pump in very good condition Fsdpfx Adeynxifecoph

Condition: excellent (used), functionality: fully functional, GEA / Stork / Koppens Forming, Breading, and Frying Line Manufacturer: GEA / Stork / Koppens Line type: forming, breading, and frying of food products The line consists of the following equipment: 1. Meat Bin (stainless steel) Capacity: 200 l 2. 200 l Bin Lifter Manufacturer: CFS Type: LFT (R) Machine number: 1642 Power supply: 400 V, 3-phase, 50 Hz Power: 0.55 kW Current consumption: 1.8 A Weight: 310 kg Lifting height: up to 2200 mm (adjustable) Dimensions: 1200 × 1300 × 3000 mm 3. Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine number: E022110205415 Year of production: 2021 Power supply: 380–415 V, 3-phase, 50 Hz Power: 8 kW Fpjdex H T Egopfx Adcsh Current consumption: 15.4 A Belt: stainless steel wire mesh Belt width: 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional forming accessories: - 2 pallets of forming plates - Stainless steel rack with 2 additional discharge belts (belt width: 400 mm) - Rack dimensions: 1350 × 600 × 2100 mm - GEA tool trolley - Trolley dimensions: 1200 × 700 × 950 mm 4. Breading Machine/Breader Manufacturer: Stork Titan B.V. Model: RotoCrumb TRC 630 TD 2112 Type: 4780626AA Serial number: 10061097 Year of production: 2007 Belt: stainless steel wire mesh Belt width: 630 mm Dimensions: 3600 × 1600 × 2100 mm 5. Stainless steel platform for IBC tanks Working height: 1800 mm Dimensions: 1200 × 1500 × 2800 mm 6. Fryer Manufacturer: Koppens Machinefabriek B.V. Type: BR 3000 / 600 Machine number: 1316 Year of production: 2000 Power supply: 400 V, 3-phase, 50 Hz Power: 1.5 kW Current consumption: 4.6 A Weight: 2450 kg Belt: stainless steel wire mesh Belt width: 600 mm Frying length: 3000 mm Heating system: thermal oil Manual hoists Fryer dimensions: 5400 × 1600 × 3200 mm Fryer accessories: - Valve station – 2200 × 600 × 2600 mm - Thermal oil station with pump – 1300 × 800 × 2700 mm - Stainless steel cabinet with 2 Ansul fire extinguishers – 600 × 210 × 750 mm 7. Oil Tank (stainless steel) Manufacturer: Koppens Machinefabriek B.V. Diameter: 1100 mm Height: 3200 mm 8. Belt Conveyor with Covers Manufacturer: Koppens Machinefabriek B.V. Model: NGT 5000/600 Serial number: 12 Power supply: 380 V, 3-phase, 50 Hz Belt width: 600 mm Dimensions: 6900 × 900 × 1150 mm 9. De-elevating Belt Stainless steel wire mesh belt Belt width: 330 mm Adjustable height Dimensions: 2000 × 800 × 850 mm Complete GEA / Stork / Koppens line is intended for industrial production of formed, breaded, and fried food products such as nuggets, burgers, patties, and convenience foods. The line enables a continuous and automated processing workflow — from raw material loading, through precise forming and even breading, right up to controlled frying with thermal oil. The set is characterised by high performance, robust stainless steel construction, and the potential for integration with other production line elements.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Fodpfoyfgwljx Adceph

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Fpodpfxsvt R A Ds Adcsh Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Fpedpfx Aeip Utaedceh Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), functionality: fully functional, Used machine in very good condition, was in operation last year. Fedevr E Edepfx Adcsph

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: P281560766/3, power: 2.35 kW (3.20 HP), Single outlet roof top air coolers in good condition including their fans. AVAILABLE the following codes : DEA 093DL-DEB 081D-DEB 094DL-DEBE 072D-DEBE 081D-DEBE 082D-DPA 032S-DPA 041S-DPA 042S-DPA 043S Fpjdeul U Aujpfx Adcsh The posted price is per piece.

Condition: refurbished (used), Year of construction: 2021, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 02, overall weight: 2,200 kg, type of input current: AC, temperature: 90 °C, power: 22 kW (29.91 HP), rotational speed (min.): 6,400 rpm, rotational speed (max.): 6,400 rpm, space requirement height: 1,651 mm, space requirement length: 2,082 mm, input voltage: 220 V, space requirement width: 1,778 mm, control cabinet width: 1,016 mm, control cabinet length: 812 mm, control cabinet height: 2,336 mm, input frequency: 50 Hz, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 300 TPD Fodow Rakcjpfx Adcoph Model: RSE 120-01-777 Condition- Rebuilt Along with PLC Panel along with Danfoss Frequency drive and Fully touch type coloured HMI (new), Tools and foundation frame (new), Water Booster Pump for operating auto cleaning system (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Supply of finetuner (new), Commissioning Spares (new)

Condition: refurbished (used), Year of construction: 2022, operating hours: 24 h, functionality: fully functional, machine/vehicle number: 01, overall weight: 2,800 kg, type of input current: AC, temperature: 90 °C, power: 45 kW (61.18 HP), rotational speed (min.): 4,600 rpm, rotational speed (max.): 4,600 rpm, space requirement height: 2,159 mm, space requirement length: 2,362 mm, input voltage: 220 V, space requirement width: 1,727 mm, control cabinet width: 1,016 mm, control cabinet length: 812 mm, control cabinet height: 2,336 mm, input frequency: 50 Hz, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 600 TPD Model: RSE 220-01-777 Condition- Rebuilt Along with PLC Panel along with Danfoss Frequency drive and Fully touch type coloured HMI (new), Tools and foundation frame (new), Water Booster Pump for operating auto cleaning system (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Supply of finetuner (new), Commissioning Spares (new) Fpodpfx Aow Rakijdcjh

Condition: refurbished (used), Year of construction: 2020, operating hours: 144 h, functionality: fully functional, machine/vehicle number: 03, overall weight: 1,400 kg, type of input current: three-phase, temperature: 90 °C, power: 7.5 kW (10.20 HP), rotational speed (min.): 6,700 rpm, rotational speed (max.): 6,700 rpm, input voltage: 220 V, Equipment: documentation/manual, oil mist separator, rotational speed infinitely variable, GEA Westfalia Self-cleaning Separator Capacity: 100 TPD Model: RTB 45-51-076 Condition- Rebuilt Along with Control Panel & VFD Tools and foundation frame (new), Pipe line fittings like Back pressure valve, Pressure switches, Pr Gauges, Sight Glass, etc (new), Commissioning Spares (new) Fjdpfx Aow Raltsdcsph

Condition: used, mileage: 1,054,000 km, power: 368 kW (500.34 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,500 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: mechanical, emission class: euro5, Year of construction: 2009, SCANIA R500 V8 EURO 5 6X2 MANUAL TRANSMISSION, RETARDER, 2 TANKS Date of First Registration: Valid until: Delivered with a new TÜV (technical inspection) and certificate. Mileage: 1,054,000 km Engine power: 368 kW (500 hp) V8 Transmission: Manual Wheelbase: 410 cm Unladen weight: 8,220 kg Permissible total weight: 26,500 kg Color: Green, Red, Blue Suspension: Parabolic suspension front, air suspension rear Emission class: Euro 5 Axle configuration: 6x2 Tire Axle 1: 385/65 L30% R30% Tire Axle 2: 385/55 L50% R50% Tire Axle 3: 315/80 L50% R50% Fifth wheel height: 118 cm Fifth wheel type: Sliding fifth wheel Fjdpfxozaydho Adcoph Cab type: Topline Extras: Manual transmission, retarder, air conditioning with automatic climate control, auxiliary air conditioning, auxiliary heater, refrigerator, 960-liter tanks, complete service history available, mileage 100% original. Additional information: * Payload: 18,280 kg * Type | First Axle: Goodyear R * Tire Size | First Axle: 385/65 R22.5 * Tire Tread Depth Inner Left | First Axle: 30% * Tire Tread Depth Inner Right | First Axle: 30% * Maximum Axle Load | First Axle: 7,500 kg * Type | Second Axle: Goodyear R * Type | Third Axle: Goodyear R * Tire Size | Second Axle: 385/55 R22.5 * Tire Size | Third Axle: 315/70 R22.5 * Tire Tread Depth Outer Left | Third Axle: 30% * Tire Tread Depth Inner Left | Second Axle: 30% * Tire Tread Depth Inner Left | Third Axle: 30% * Tire Tread Depth Outer Right | Third Axle: 30% * Tire Tread Depth Inner Right | Second Axle: 30% * Tire Tread Depth Inner Right | Third Axle: 30% * Maximum Axle Load | Second Axle: 7,500 kg * Maximum Axle Load | Third Axle: 11,500 kg * Wheelbase: 410 cm * Cab: Yes * Price on Request: Yes * Brake Type | First Axle: Disc Brakes * Steering | First Axle: Yes * Brand | Third Axle: Other * Brake Type | Second Axle: Disc Brakes * Suspension | Second Axle: Air Suspension * Suspension | Third Axle: Air Suspension * Reduction | Third Axle: Single Reduction * Lift Axle | Second Axle: Yes * Twin Tires | Third Axle: Yes * Driven | Third Axle: Yes * Steering | Second Axle: Yes * Position | First Axle: Front * Brand | First Axle: Other * Suspension | First Axle: Parabolic Springs * Position | Second Axle: Rear * Position | Third Axle: Rear * Brand | Second Axle: Other * Brake Type | Third Axle: Disc Brakes * Differential Lock | Third Axle: Yes

Condition: used, mileage: 261,316 km, power: 74 kW (100.61 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,660 mm, fuel: diesel, CO₂ emissions: 156 g/km, fuel tank capacity: 60 l, color: white, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 2, total length: 4,540 mm, total width: 1,840 mm, total height: 1,860 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, onboard computer, power mirror, seat heater, sliding door, start-stop system, traction control, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Measures length/height: L1H1 Weights Empty weight: 1.486 kg Carrying capacity: 714 kg GVW: 2.200 kg Interior Interior: grey Consumption Average fuel consumption: 5,3 l/100km (53 MPG) Urban fuel consumption: 6,1 l/100km (46 MPG) Extra urban fuel consumption: 4,8 l/100km (59 MPG) Maintenance, history and condition Number of owners: 5 Number of keys: 2 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = Fpodpozbhiusfx Adcoh - Bumpers in colour of body - Driver's airbag - Electrically operated front windows - Electronic brakeforce distribution - Emergency braking assistance - Front central armrest - Front fog lights - Front head airbags - Front side airbags - Heated door mirrors - Heated seat - Heated windscreen - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Lumbar support - Multifunctional steering wheel - Multimedia enabled - Partition - Passenger airbag - Radio - Radio with DAB - Rear parking sensor - Remote central locking - Reversing camera - Sliding side door right - Warning traffic from behind

Condition: used, Item: GEA - Damrow Cheese Vat 15.000L Used GEA Damrow type Double-O, capacity 15.000 l, Double jacketed, Insulated, CHeese vat with agitators Double-O. Fpedpfx Aey Tzkqodcsh Good working condition! 3 pieces to offer! NOTE! Control unit.with Siemens Simantec Touch display

Condition: used, Year of construction: 2000, Overview This complete hot-fill bottling line for non-carbonated beverages was was put together by the last producer himself and ran smoothly right up until the end. The line is designed for processing, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes upstream thermal processing, filling, downstream cooling, and end-of-line packaging equipment. The line is still assembled and can be viewed in person at any time.  Technical data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 L / 1.0 L / 0.5 L / 1.5 L Application: Hot filling of juice and non-carbonated beverages Configuration: Heating / pasteurization system (plate heat exchanger based) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and sealing system Utilities: Compressed air, electrical supply Scope of Delivery Depalletizing crane system | DEMAG | Manual layer depalletizing with air-cushion gripping system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot fill Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Feed tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger based heating system Carton erecting system | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton forming unit Carton sealing system | BORTOLIN |  Hot melt carton sealing Glue system | Nordson | Series 3400 | Hot melt unit Conveyor systems | Various transport conveyors Fodjy Rmfbopfx Adcjph

Condition: used, mileage: 969,655 km, power: 162 kW (220.26 HP), first registration: 02/1999, fuel type: diesel, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 350 l, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, total length: 9,300 mm, total width: 2,550 mm, total height: 2,950 mm, loading space length: 7,370 mm, loading space width: 2,520 mm, Year of construction: 1999, Equipment: ABS, power assisted steering, = Additional options and accessories = Fpedpfeyrg Evsx Adceh - Central lubrication = Further information = Transmission: GR, manual gearbox Number of cylinders: 6 Unladen weight: 7,840 kg Payload: 10,760 kg Gross vehicle weight: 18,600 kg Technical condition: good Contact Vitali Lenda for more information.

Year of construction: 2023, condition: as good as new (ex-display), CMS Gea Horizontal cnc working center for Glas Axis Movement: X-Axis: 3.800 mm Y-Axis: 2.550 mm Z-Axis: 420 mm C-Axis: 360° Options: - Elektrospindle 13,5 kW 0-15.000 U/Min - Materialmeasurement and Toolmeasurement system Fpsdpfx Asp Auvasdceh - 3x Fast exchange tool magazin with total 21 slots - Additional tool magazin 24 slots - CAD/CAM - central lubrification