Used Bronx Bronx Ctl 2000X8 for sale (74)

Condition: used, Cut To Length CTL 2000x8, made by BRONX Strip width: 600 - 2.000 mm Strip Thickness: 2 - 8 mm Coil max. weight: 30 Tn Coil Outer Diameter: Up to 2.100 mm Lasdpfx Amoymclbjnea Coil Inner Diameter: 508mm - 610mm - 762mm with filler segments Sheet Length Stacker: 600 - 8.000 mm Stacking Capacity: 1 x 8000mm long x 2000mm wide packs Stacking: 10000kg maximum uniformly distributed over 5000mm sheet length Pack Height: 750 mm Max. speed: 60 m/min

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Lsdjh U Rzgjpfx Amnoaa Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm Lodoyuql Sjpfx Amnoaa voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Lodpfxjq Ulh He Amnsaa Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² Laedpomqkt Tsfx Amnoa tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE Lasdpfxemqkube Amnsa • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm Lsdpomqkuuofx Amnjaa working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, TWO ROLLS BAR STRAIGHTENER PBVR6 Manufacturer: BRONX Capacity - Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm - Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm - Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left Scope of supply Lasdpfx Aoymcn Ajmnea - Entry chanel - Duo introduction - Straightener - Exit chanel Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp Lsdpfstvdy Iox Amnjaa 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: used, SCOPE OF SUPPLY: - Uncoiler - Introduction and Pre-Straightening Group Ledpfx Amsymcf Usnjaa - Leveller - Looping Table for Automatic Cutting - Cross-Cut Shear - Measuring Table - Exit and Stacking Roller Table Coil weight: 5 Tn Coil width: 650 mm Thickness: 0.3 - 2.5 mm Coil external diameter: Max. 1500 mm Mandrel diameter: 480 - 520 mm

Condition: used, Cut-To-Length line CTL 2000x6, made SALICO LOADING CRADLE LIFTING DEVICE CANTILEVERED UNCOILER with third support, coil opener & threading table; electric brake; clockwise rotation PRE-LEVELLER 4-Hi LEVELLER with 15 working rolls, Ø 65 mm, 9 rows of supporting rolls, each row with independent adjustment. INTERMEDIATE TABLE ELECTRONIC CIRCULAR SHEAR INTERMEDIATE TILTING TABLE INTERMEDIATE MOBILE TABLE Lodpfxeymcf Is Amneaa INSPECTION PULT FOR STACKER TRAPDOOR FOR SCRAP EVACUATION MAGNETIC STACKER WITH DOBLE POSITION WEIGHTING DEVICE & CHAINS JIB CRANE FOR STRAPPING UNIT Coil Width: 500 – 2000 mm Strip thickness: 0.8 – 6 mm Coil weight: 30 ton Outer diameter: 508 – 2000 mm Inner diameter: 508 / 610 mm Max. speed: 80 m/min

Condition: used, CUT-TO-LENGTH LINE IPM 1250x1.5x15 Technical data Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm Scope of supply Lasdjymb Arspfx Amnsa 1. Uncoiling cantilevered mandrel with hold down roll 2. Guiding table 3. Levelling machine 4. Loop pit with tiltable covers 5. Start-stop shear 6. Band conveyor 7. Stacker for 400 – 5000 length bundles 8. Switch cabinets & control desks 9. Hydraulics 10. Existing documentation 11. Hydraulics Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm

Condition: used, CUT-TO-LENGTH LINE FIMI 2000x10x30 TECHNICAL DATA Strip width: 750 - 2000 mm. Thickness: 2,5 - 10 mm. Coils - Max coil weight: 30.000 Kg - Inside diameter: 600 - 810 mm - Outside diameter: 1000 - 2000 mm Exit - Adjustable width: 700 - 2000 mm - Stackable length: 1.000 to 12.000 mm - Height of package: Maximum 300 mm - Weight of package: maximum 7 Tons SCOPE OF SUPPLY - Entry coil car - Uncoiler - Guiding plate - Input pinch-roll group - Coil opener - Centring unit - Pressure roll Lsdpfx Amsymbgdjnoaa - 6-HI Leveller - Flying shear - Inspection conveyor - Exit pinch roll - Stacker - Hydraulic System - Pneumatic System - Lubricating System - Electrical Equipment - Existing documentation Strip width: 750 - 2000 mm. Thickness: 2,5 - 10 mm. Max coil weight: 30.000 Kg Inside diameter: 600 - 810 mm Outside diameter: 1000 - 2000 mm Adjustable width: 700 - 2000 mm Stackable length: 1.000 to 12.000 mm Height of package: Maximum 300 mm Weight of package: maximum 7 Tons

Year of construction: 2026, condition: new, Flexible cut to length lines for standard and mid-range production needs with customized capacity and width options. Bosporas Machinery is a manufacturer of coil processing lines, delivering high-performance and customized industrial solutions worldwide. Our standard and mid-range cut to length lines are designed for precise sheet production from coil with reliable performance, stable operation and flexible configurations. These systems are ideal for manufacturers looking for efficient solutions for medium gauge sheet processing. Available in different capacities and working ranges, the lines can be customized according to customer production targets, material specifications and factory layout requirements. Whether for new investments or production upgrades, Bosporas provides complete turnkey cut to length solutions with international project experience. ⚙️ AVAILABLE CONFIGURATIONS 2 mm | 1300 mm | 4 Ton Cut to Length Line 3 mm | 1500 mm | 15 Ton Cut to Length Line Custom capacities, widths and thickness ranges are available upon request. 📊 TECHNICAL RANGE Material Thickness: 2 – 3 mm Coil Width: 1300 - 1500 mm Coil Weight: 4 Ton – 15 Ton High precision sheet length cutting Stable continuous production performance Lajdpfx Amsy Dug Hjnja 🔧 MAIN LINE COMPONENTS Depending on project requirements, the line may include: Hydraulic or Mechanical Decoiler Straightener / Leveler Unit Servo Feeding System Guillotine / Rotary / Hydraulic / Eccentric Mechanical Shear Conveyor Systems Automatic Stacking System Exit Table PLC & HMI Control System ⚙️ ENGINEERING FEATURES High cutting accuracy and repeatability Stable sheet flatness performance Heavy-duty machine construction Servo controlled feeding systems User-friendly automation interface Modular design for future upgrades Designed for industrial continuous operation ⚡ OPERATIONAL ADVANTAGES Flexible production for different sheet sizes Consistent cut quality Reduced labor and handling time Efficient material processing Turnkey project solutions Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Steel service centers Sheet metal distributors Construction materials production HVAC manufacturers White goods industry General metal processing companies 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar cut to length lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, layout drawings and technical details can be provided upon request.

Condition: used, Automatic start-stop shear manufactured by PROIN. It allows for cutting adjusted to the following specifications: - Strip width: 300 to 2050 mm - Material thickness: 2 – 10 mm - Tensile strength (Rm): maximum 600 MPa - Cutting length: 400 – 1200 mm The cutting speed varies depending on the strip's thickness: - Thickness ≤ 5 mm: 36 m/min - Thickness ≥ 5 mm and ≤ 10 mm: 18 m/min Material width: 300 – 2.050 mm Material thickness: 2 - 10 mm Tensile strength (Rm): maximum 600 MPa Laodpfx Amexdcyljnea Length: 400 – 12.000 mm

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm Lajdpfsvtpdgex Amnea

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. As an option we can offer used machines for your requirements. Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery Ljdpfx Ameqlbpgonjaa

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Laodpfxsx Rn Tme Amnja Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Max Acceleration:1G Cutting Speed: 0-140 m/min Lsdpoyut Dkjfx Amnjaa Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€

Condition: new, Year of construction: 2026, laser power: 3,000 W, laser wavelength: 1,064 nm, working length: 3,050 mm, working width: 1,530 mm, Model: IMPACT Laser OP-3015H Cutting Size: 3050*1530mm Laser Power: 3000W or 6000W Laser Generator: MAX Laser Wave Length: 1064nm Position Accuracy: 0.02 mm/m Repeatability Accuracy: 0.01 mm Laedpeytd Scsfx Amnsa Max Acceleration:1G Cutting Speed: 0-140 m/min Interface: USB,RJ45 Working Voltage: 1000-2000W:220v, 2phase, 50hz 3000W:380v, 3phase, 50hz Working life of fiber module: More than 100000 hours Work Environment: 0-45°C, Moisture 45-85% Machine structure: Big thickness stable & strong square tube welded steel bed Beam: Aviation grade tensile aluminum beam Brand of Motor and Drivers: China Innovance Servo motor and drivers (1800W*2+850W+400W) Transmit System: Dual Rack & Pinion type Control System: FUSCUT 4000E Controller Cutting Head: BLT421 automatic focus cutting head Reducer: Italian Motovario reducer Liner Guider System: Taiwan Hiwin (X 25mm, Y 30mm, Z 20mm) Water Chiller: S&A Computer: Industry computer Automatic lubrication system: Yes Pneumatic proportional valve: Japan SMC Prices: 3kW: 39.500€ 6kW: 44.500€

Condition: new, functionality: fully functional, laser power: 1,500 W, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, This series from IMPACT is an economical, single-platform laser cutting machine. Its space-saving design makes it easy to load and unload the cutting table, which is accessible from all sides of the machine. Suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most sheets and is ideal for a wide range of industries. It ensures flexibility in your production, being very easy and quick to operate. We provide all the support you need to start production in a few days. TECHNICAL FEATURES: • Compact electrical cabinet, integrated into the machine construction to save space; • Large LCD operating panel and easy-to-use mobile arm support; • Remote technical troubleshooting - Equipped with internet connectivity; • Laser head with automatic focus and anti-collision functions; • Industrial components from renowned manufacturers with high reliability; • Access on both sides for dust carts; • Safety systems for operator and machine safety; • CE standard. TECHNICAL SPECIFICATIONS: Model: FM3015 Laser power: 1.5 kW (MAX source) Maximum cutting thickness (1.5 kW): STEEL: 12 mm / STAINLESS STEEL: 8 mm / AL: 4 mm Working area: 3,050*1,530 mm X/Y/Z axis travel: 1,530 / 3,050 / 100 mm Maximum load on machine table: 800 kg Lsdpfexfiwyjx Amnjaa Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.03 mm Maximum speed: 80 m/min Acceleration speed: 0.8G Exhaust system: Included (with centrifugal motor fan) Laser source and head cooling system: Included Machine size (reference): 4,500*2,250*1,920 mm Total weight: 2,500 kg

Condition: new, functionality: fully functional, control type: CNC control, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, table length: 3,050 mm, table width: 1,530 mm, working length: 3,050 mm, working width: 1,530 mm, cutting speed: 120 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.02 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, IMPACT 3015A Fiber laser cutting machine suitable for high-precision cutting of metal plates, with high photoelectric conversion rate. It is a new energy-saving and environmentally friendly product, and one of the world’s leading technology products. It is suitable for cutting metal plates such as stainless steel, carbon steel, alloy steel, silicon steel, aluminum, copper, brass, titanium alloy, galvanized sheets, etc. Unmatched Accessibility - Because the machine is an "open type" (without a full protective enclosure), operators have 360° access to the cutting bed. This makes loading raw sheets and unloading finished parts significantly faster and easier, especially when using a forklift or overhead crane. Space Efficiency - The 3015 model is designed with a compact footprint. Without the bulk of a large safety cabin or a dual-shuttle table system, it fits comfortably into smaller workshops where floor space is at a premium, providing a high "power-to-square-foot" ratio. Cost-Effectiveness - Open-type machines generally have a lower initial investment compared to fully enclosed or exchange-table models. They are also easier to maintain, as all mechanical components (rails, racks, and motors) are readily accessible for routine cleaning and lubrication. Efficient and precise cutting of medium and thin plates: • Easy access for loading and unloading the material from all 4 sides; • Auto-focus laser head; • Automatic edge detection; • Nesting included for optimizing the drawings and optimize material usage; • Easy to operate; • CE standard. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display 18.5 inch Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system Ledpfxjyhclwj Amnoaa Voltage stabilizer & regulator unit CE mark

Condition: excellent (used), Year of construction: 2003, We currently have 6 units of the Weland Compact Lift 2440x820 available for sale in excellent condition. Lasdpfox Afcgsx Amnsa These vertical lift modules are from 2003 and have been regularly serviced by the manufacturer. All machines are fully operational. The machines are offered in packages of 3 units at a very competitive price. They are ideal for anyone seeking efficient storage solutions without the high cost of new equipment. Each tray measures 2,445 mm in width and 820 mm in depth, providing a surface area of 2 m² per tray. With approximately 40 trays per machine, each unit offers a total storage area of 80 m², while occupying just 8.7 m² of floor space. The units have a height of 8,000 mm but can be reduced during installation if required. The machines are ready for prompt delivery and installation. Technical information: Manufacturer: Weland Solutions Year of manufacture: 2003 Model: Weland Compact Lift 2440 Height: 8,000 mm, flexible Width vertical lift module / tray: 2,917 mm / 2,445 mm Depth vertical lift module / tray: 2,998 mm / 820 mm Number of trays: Approx. 40 per module Maximum load per tray: 300 kg Electrical requirements: 400 V, 20 A

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM Ledpfx Asvca Nremneaa WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. we deliver in complete Europe, we have in Europe in 3 locations a sales and service organization.

Condition: excellent (used), mileage: 186,068 km, power: 74 kW (100.61 HP), first registration: 01/2020, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 3,060 mm, fuel: diesel, CO₂ emissions: 122 g/km, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,830 mm, total width: 1,840 mm, total height: 1,850 mm, permissible axle load (axle 1): 1,225 kg, permissible axle load (axle 2): 1,165 kg, Year of construction: 2020, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, power mirror, sliding door, traction control, General information Number of doors: 3 Cab: single Registration number: VDZ-99-S Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Axle configuration Tyre size: 205/60R16 Brakes: disc brakes Front axle: Max. axle load: 1225 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 1165 kg; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 1.540 kg Carrying capacity: 745 kg GVW: 2.285 kg Max. towing weight: 1.350 kg (unbraked 750 kg) Consumption Average fuel consumption: 4,6 l/100km (61 MPG) Urban fuel consumption: 4,9 l/100km (58 MPG) Extra urban fuel consumption: 4,2 l/100km (67 MPG) Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Bumpers in color - Climate control - DAB Radio - Heated door mirrors - Metallic paint - Multifunctional Steering Wheel - Parkingsensors back - Radio/Cd/Audio system - Reversing camera Lodpsyi Udnofx Amnjaa - Side Door Right = Remarks = VIDEO: Very nice and neat Ford Transit Connect 1.5 TDCI 100 hp Euro 6 L2 Extended version 186,000 km NAP Dealer maintained Air conditioning / Cruise control / Climate control Reversing camera / Navigation / Paneled cargo area Technically and visually in good condition