Tube straightener / tube finishing shop

MAIR / BRONX etc.

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right Itsdpfx Apsmqkt Tonsg The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: used, Thread rolling machine ORT RP30U 2-roll Itodpfx Aet H Ty Uepnog 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Year of construction: 2000, condition: excellent (used), maker: diverse (Europäische Union) year: 2000 tube Ø: 40 – 150 mm wall thickness: 1 – 4 (5) mm Ijdpsmqkubofx Apnotg reference material (tensile strength): 1.000 N/mm² tube length shop entry: 4 – 10 m tube length shop exit: 4 – 8 m bundle weight: max. 3.000 kg bundle Ø: max. 600 mm working direction: left → right The shop consists of: • tube bundle destacker I with separation MAIR • tube straightender (10 rolls) BRONX type 10Cr.6-BWS • tube bundle destacker II with separation MAIR • wet separator HANDTE • tube bundle destacker III with separation MAIR • tube testing eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • multiple-head saw MAIR type MC150/7/10 • tube bevelling machine MAIR • brushing machine MAIR • destacker/stacker MAIR • tube bundle destacker MAIR • tube banding machine MAIR/ORGAPACK • emulsion treatment SCHOENAUER • control Siemens S7 • hydraulics

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm coil weight: 10 t Isdpfsqw Akmox Apnotg

Condition: new, Year of construction: 2026, Build your production facility for the best ergonomics, efficiency and profitability. A sheet metal decoiler will allow your business to save money, reduce waste within your shop and help free up storage space. We have the right solution whether your sheet metal workshop is big or small. CIDAN Machinery has a wide range of decoilers that can be combined to make an efficient production facility based on your requirements – where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. Using a sheet metal decoiler from CIDAN Machinery: - is very efficient Itjdpfx Apjmfn Iconeg - reduces waste - is ergonomic - saves money.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New device, in stock, available for immediate delivery - Capacity: 18,000 liters - Tmax: 450°C - Internal dimensions (L x W x H): 4,100 x 2,100 x 2,100 mm Itodpfxeu Hma Ns Apnjg - External dimensions (L, with rails) 9,970 x W 3,060 x H (with lifting door) 6,110 mm - Control system: Eurotherm Nanodac - Temperature stability (at nominal temperature without load): ±5°C - Automatic supply and exhaust air dampers - Electric lifting door - Electrically driven bogie hearth - Power 247 ±9% kW - 400 V, 50 Hz - Documentation, CE declaration Installation, commissioning and staff training can be provided upon request. Please contact us! We supply new and used industrial furnaces. Viewing in our warehouse available upon request! Oven, ovens, annealing furnace, kiln, hardening furnace, heat oven, furnace, tempering oven, curing oven, drying oven, industrial furnace, drying cabinet, heating oven, tempering cabinet, chamber furnace,

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Ijdpfogyy I Asx Apnjtg Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Iodpfeghrguox Apnetg Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW 40-station ATC Ijdpfx Aoyzzf Ropnstg Tool turret Number of driven tools 12 (12)

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel Iodpfx Aem Nb Riopnetg >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm