BRONX CTL 2000x8

BRONX CTL 2000x8

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Iijdpfx Ajwi Tidsg Ujc Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: excellent (used), Year of construction: 1980, strip width: 1.500 mm strip thickness: 3 mm Iedpfx Asqw Akmeg Uoic coil weight: 10 t

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Ijdet Ul Exopfx Ag Ujic

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: AK26-015, number of ink cartridges: 8, total length: 4,400 mm, total width: 4,400 mm, total height: 1,820 mm, input voltage: 380 V, overall weight: 4,400 kg, product height (max.): 50 mm, Equipment: cooling unit, documentation/manual, Hybrid UV Inkjet printer for sheet and roll materials. Print resolution: 1200 dpi Modulation of the print droplet: Binary, Gray balance Number of colors: 6 colors - CMYK Lc Lm Additional white color that is printed before colored colors (underprint) Iiodjqlahtepfx Ag Uec Drying of all colors using LED lamps Dot size on the printhead: 7-14-21 picoliters Maximum material thickness: 50 mm Maximum width of printing on plate materials: 3,500 mm The possibility of simultaneous printing of two plates next to each other Display table for receiving plate materials with a length of 2,200 mm Maximum print width on roll material: one roll 3,470 mm, two rolls next to each other 1,625 mm Maximum weight of material in a roll: 350 kg Maximum roll diameter: 350 mm Supports for two rolls of length 3,470 mm on the input and display

Condition: new, Year of construction: 2025, Metal picket fence roll forming machine MFP-1 was designed by our company to produce semi-round shape picket metal fence profile. This profile is widely used and popular among companies with business in manufacturing, installation and selling of metal fences. The production of the profile goes gradually, at first hemming forms on edges from the flat metal, and then the height of the profile and the semi-round shape are formed, at the last stage of rolling machine forms the rib in the profile center. Such number of forming stages makes it possible to ensure smooth sheet changes during rolling, as well as high quality of the final product. As a blank, you can use a strip of required width and length, to prepare it with pre-cut on other equipment – sheet metal slitting machine or guillotine shear. After roll forming, to make fence picket end look better, you can use special cutting press of our production. The working tools of such press have special round configuration and are the same as semi-round metal picket shape to make appropriate cutting. Those tools are made from special tool steel, and goes through process of hardening so ensure high requirements for the cutting tools of the equipment. Our company can produce as semi-automatic rolling machine for the metal fence pickets manufacturing and a manual punching press for it, as well as a fully automatic line. Isdem Twnljpfx Ag Ujic Such metal fence automatic line can have following components: console metal decoiler, a rolling machine equipped with an automatization system with the ability to program the number of required pickets for rolling and their lengths, automatic electric shear for cutting metal at the end and stacker part. Thus, cooperating with us, our customers can choose the best option for their manufacturing process according to their planned production volumes, budget, etc. For more details about metal picket fence roll forming machine MFP-1 please contact our sales department

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Iodeicbbzspfx Ag Ujic Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head Froehling Froehling is a renowned brand recognized for reliability and robustness in the field of rolling mills. 4Hi rolling mill head with bending and coilers. Iodpfx Agjg Ryqke Usic Specifications: Manufacturer: FROEHLING (Germany) – Refurbished 2004 Processable material: Aluminum alloys – brass – copper – low carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 - 2mm Coil size: ID 400mm – OD 1500mm Max. rolling speed: 400m/min Work rolls: Diameter 130mm – Table 340mm Back-up rolls: Diameter 390mm – Table 335mm Complete with: Uncoiler and recoiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, dismantled and loaded on truck. Ready for inspection by any interested buyer. For any questions, do not hesitate to contact us. PLEASE SUBMIT YOUR OFFER IF INTERESTED, WE WILL SURELY REACH AN AGREEMENT TOGETHER.

Condition: used, mileage: 129,754 km, power: 368 kW (500.34 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2028, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, crane, Internal vehicle number: VTC30026 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions [mm]: 6400 x 2550 Palfinger PK53002 SH Iisdpeyrv Tcefx Ag Ujc 1159 operating hours 4m – 10,800 kg 6m – 7,600 kg 8m – 5,700 kg 10m – 4,450 kg 12m – 3,650 kg 14.5m – 3,050 kg ELBO PCS trailer (included in vehicle price) EUR 17,900 Ref. No.: VTC30018 Year of manufacture: 2023 Current weight: 4,650 kg Permissible payload: 13,350 kg Overall dimensions: 8,250 x 2,550 mm Loading area dimensions: 6,400 x 2,550 mm Tyres: 235/75 R17.5 Suspension: Air suspension Brakes: Drum brakes Hydraulic ramps Errors excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly through our company. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Year of construction: 2016, operating hours: 10,900 h, condition: excellent (used), functionality: fully functional, The machine is in very good condition and fully operational. We don't need it anymore so it is for sale. It is regularly maintained. Dismantling and load on truck are included in price. Some other informations: 4-axis profile machining centre Designed for flexible and efficient machining of aluminium Iijdpswwtylofx Ag Ujc Autonomous clamp positioning Max. working lenght: 7.600 mm 8 pneumatic clamps Tool magazine with 8 tools capacity Spindle working hours 5100h Additional tehnical specifications available on request

Year of construction: 2007, operating hours: 4,100 h, condition: good (used), functionality: fully functional, The machine is not more needed for our production and therefore its for sale. The machine is in our ownership from 2007 and it is regularly maintained. Everything works normal. Dismantling and load on truck are in price. Some more informations: 5-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 9.300 mm 12 pneumatic clamps Tool magazine with 20 tools capacity and saw blade 500mm Spindle working hours 4100h Iedswwtw Djpfx Ag Ujic Additional tehnical specifications available on request