Used End Pn16 for sale (6,529)

Condition: used, Year of construction: 1989, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 5399 195, type of input current: three-phase, total length: 6,830 mm, total height: 1,490 mm, total width: 1,400 mm, feed length X-axis: 80 mm, feed length Y-axis: 20 mm, feed length Z-axis: 80 mm, input voltage: 400 V, overall weight: 2,100 kg, compressed air connection: 60 bar, air demand: 60 m³/h, input current: 63 A, year of last overhaul: 2020, sheet thickness aluminum (max.): 40 mm, air pressure: 60 bar, power: 6 kW (8.16 HP), product height (max.): 100 mm, product height (min.): 70 mm, product length (max.): 135 mm, product length (min.): 110 mm, SL80 Bradman Machine – Used & Fully Functional Gbedpfozx Ehzex Al Sju SL80 Bradman machine for sale. The machine is used but in good working condition and is fully functional. It has been well maintained and is ready for use. Selling due to no longer being required. Buyer is welcome to inspect the machine before purchase. Please get in touch for more information or additional photos.

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Item location is 75053 Gondelsheim Godpfx Aloum I Sfe Sjbu Used condition, see pictures Shipping by forwarding agent or collection by appointment

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: CAR-LPR-001, working width: 300 mm, feed rate X-axis: 15 m/min, overall weight: 4,500 kg, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 24 mm, Equipment: double-sided, Equipped with an infeed table 300x55x100 cm, Godpfxoz Rkcts Al Sobu 2 transport chains with prism guides (length approx. 2400 mm), 2 pressure chains with drive motor and height adjustment, 2 machining motors with profiling cutter Ø 250 mm and height adjustment, 2 machining motors with chamfering cutter Ø 150 mm and height adjustment, manual width adjustment, 2 pre-cutters. No air connection required. CAPACITY: width minimum 90 mm, width maximum 300 mm, thickness minimum 9 mm, thickness maximum 24 mm, length minimum 450 mm, length maximum infinite mm; total power approx. 25 kW; including flexible hoses up to the ceiling and including lifting table. The machine is in like-new condition and in perfect working order. Perfection in simplicity and quality!

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Gedpfxez Ng Ayo Al Ssbu Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: used, Year of construction: 2013, functionality: fully functional, URBAN post milling cutter. Gjdjzpyhkepfx Al Ssbu

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Maximum Balance Length 5000mm (Approx). Max Rotor Diameter 3250mm (128"). Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Godpsz Eay Nofx Al Sobu Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3458 F, working width: 2,500 mm, Double tenoner FRIULMAC 2003, 3+3 heads Gbodpfxjx Rdrfe Al Seu

Condition: ready for operation (used), Three drive units per side (top, bottom, side) Top and bottom motors: 2.2 kW Gbjdpfoz Ii Afex Al Seu Side motor: 3 kW Spindle diameter: 40 mm Cutting length: 300 cm Overall dimensions: Length: 5.1 m Width: 185 cm Height: 150 cm

Condition: used, Year of construction: 2016, total width: 2,500 mm, total length: 4,500 mm, total height: 2,300 mm, overall weight: 9,000 kg, LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H Weight approx.: 9,000 kg Control: Sinumerik 840 D SL Dimensions (LxWxH) approx.: 4500 x 2500 x 2300 mm Powered tools: Yes Year of construction: 2,016 Gbedpfx Aez E T Tvsl Ssu Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: excellent (used), Year of construction: 1950, Safag Type 27 Special Carbide Bit Grinder Brand: Safag Model: 27 Serial Number: 296 Year of Manufacture: Vintage 1950s (approx.) Dual 6" diamond grinding wheels with fine grit (700) Gbsdjh Izv Aepfx Al Ssu Universal tool holder Tool holder for up to 10 mm square-shank tools Coolant tank mounted on the back of the machine 3/4 HP main drive 220 Volts 3-phase Complete factory closure, large selection of storage platforms, pallet racking, shelving units, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3928 A, working width: 250 mm, Equipment: documentation/manual, Motor Power: 30 kW Equipped with: Gsdoxix Tfspfx Al Ssbu Hnebni Iow A A E Is Rp Tot 1+1 saws 1+1 milling unit 1+1 drilling unit Max length: 1000 mm Max width: 250 mm Max thickness: 50 mm double end tenoner, double drilling, step by step

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection 1 x AOI database structure Web Apache server 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Gbedoyw Nxwjpfx Al Ssu Height measurement up to 25 mm PCB size: 50x50 – 510x460 mm Component clearance: top 40 mm, bottom 40 mm

Condition: used, This listing is for the Eppendorf Centrifuge 5420 The unit is in full working condition and is ready for immediate use The Eppendorf 5420 is a non-refrigerated microcentrifuge designed for routine molecular biology workflows—especially spin‑column-based DNA/RNA purification, gel extraction, and PCR prep. It offers outstanding performance while saving precious bench space. Key Features & Design Highlights Compact Footprint: Measures just 24 × 35 × 22 cm (W × D × H), or approximately 9.4 × 13.8 × 8.7 in., making it ideal for crowded lab benches. High-Speed Performance: Reaches up to 15,060 rpm, generating a maximum relative centrifugal force (RCF) of 21,300 × g. Large Capacity with Flexibility: Comes standard with an aerosol‑tight rotor accommodating 24 × 1.5/2.0 mL tubes. Optional adapters support 0.2, 0.4, 0.5 mL tubes, 0.6 mL BD Microtainers, as well as a rotor for 32 × 0.2 mL PCR tubes or four 8‑strip PCR sets. Ergonomic Controls: Soft‑touch lid closure—one-finger operation. Automatic lid opening at the end of runs to minimize sample warming and ease access. One‑push short‑spin key—perfect for quick spins without holding the button. Godoxhd Hbepfx Al Sjbu Easy‑clean keypad and large, bright LCD display. Low Noise & Safety: Quiet operation at

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). Gsdpfxoz Ny Rkj Al Ssbu • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3151, Stainless Steel Heated Filtration System for Machining Center Capacity: 28 l Max. Operating Pressure: 16 bar Max. Operating Temperature: 95°C Gsdpfx Aowtga Rsl Sobu Grundfos (Pump): Type: MTR15-14/12A-W-A-HUUV n: 2924 rpm Hz: 50 kW: 11 Q: 17 m3/h Hmax: 169 m Grundfos (Motor): Type: MG160MB2-42FF300-H3 The Wolftechnik stainless steel filtration system, custom designed for the machining center WTBF85-F50-SS-TTV-GD-PN16, offers a high-quality solution for filtration in demanding manufacturing processes. Its heating capability ensures continuous operation even at low temperatures, preventing disruptions in production. With a high-performance Grundfos pump and a reliable motor, the system provides efficient flow control and continuous filtration.

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Gjdpfxjzqun Uo Al Ssbu Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: excellent (used), Check valve, non-return valve Gbodpeb A Rxmsfx Al Seu -Type: GS011 -Connection: DN100 -Nominal pressure: PN16 -Total length: 18 mm -Passage: 70 mm -Valve cover material: Stainless steel -Number: 1x valve available -Price: per piece -Weight: 2.5 kg

Condition: used, Double-end face/edge trimmer Gbjdpfx Aloz Nlcrs Ssu

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: E212514, total width: 240 mm, total height: 120 mm, spindle speed (min.): 4,000 rpm, spindle speed (max.): 7,000 rpm, overall weight: 300 kg, rotational speed (max.): 7,000 rpm, rotational speed (min.): 4,000 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, Soundproof automatic end milling machine. Adjustable feed rate and rotation speed. -45° to 45° end milling by adjusting the stop. Easy and quick blade changes thanks to pneumatic quick-release coupling. Includes 4 spindles with 12 accompanying blades. Gbsdpfxjz Ii Uue Al Sou In very good condition.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. The system was in use for only a few years before the entire log infeed was removed. Godewkdt Njpfx Al Ssbu We also have additional components from the same log infeed available.

Condition: used, Year of construction: 2010, Brooks Automation Wafer Front-End Module, 300mm, ASYST Spartan EFEM, Sorter Model: ASYST Spartan EFEM Type: Sorter Condition: Used Technical Data: Gbodex I Ax Sopfx Al Sou 100-240V AC 50/60Hz 10A General: 300-mm EFEM with 3 load ports, cleanroom mini-environment, and integrated wafer transfer robot This unit is an Equipment Front End Module (EFEM) from the ASYST Spartan series, designed for fully automated handling of 300 mm silicon wafers in semiconductor manufacturing. It features three load ports, a mini-environment with ULPA air filters, internal lighting, comprehensive safety controls, and all necessary interfaces for seamless integration into production lines. In addition, it comes with a fully integrated wafer transfer robot that extracts wafers from FOUP/carrier load ports, separates them, and precisely delivers them to downstream process modules. Year of manufacture: 27.12.2010 Including CD with operating, service, and installation manuals (9701-3060-01 Rev G)

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Max. tube diameter: approx. 40 mm Gsdpfszzwpvsx Al Sjbu Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: good (used), Year of construction: 2012, I sell the automatic optimising end cutting saw Salvador Superpush 200, year 2012. Input table automatic feeding 5,10m (pusher system) Outut table 3,00m Total length: 9,00m Gedoyi Suwspfx Al Sobu Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: good (used), functionality: fully functional, automatic pipe end deburring in continuous process --- Pipe length max. 600 mm Max. pipe diameter 30 mm Brush length approx. 450 mm Brush revolutions 2000 rpm 2 brush drive motors, 5.5 kW each Gbsdpfx Alszyx Udj Sou

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Gbjdpfx Ajzc Rdkjl Sou