Used Heller Drz 10-2-500 for sale (96,183)

Condition: good (used), MBO T500-2/4 folding module + T-500-2-X cross-folding knife unit Machine in very good condition, ready for production. Kodpoz S Uptjfx Acpedu From the original owner. This is a secondary (cross-folding) module for an MBO folding machine, complete with an additional knife-folding unit. Includes 4 folding cassettes and one cross-folding knife. Equipped with sound-dampening cassettes. Can be connected to virtually any MBO machine model or used as an add-on unit for other machinery. Mounted on casters for easy mobility. Independent control system.

Condition: new, Year of construction: 2020, functionality: fully functional, empty load weight: 135 kg, tank capacity: 500 l, pressure (max.): 6 bar, NEW! Packed!!! Dimplex standing buffer tank PSW 500, Universal buffer tank for sale in several pieces Nominal capacity 500 l, PU insulation (2.4 kWh/24h = 100 W), with three 1.5" sleeves for immersion heaters (up to CTHK 635) with two 2.5" heating water connections with DN 180 flange for installing RWT 500 finned tube heat exchanger Kdodpfjw Hcdlex Acpsu with three adjustable feet Inclination angle 2.08 m Operating pressure 6 bar Height: 1950 mm Inclination size: 2045 mm Diameter: 700 mm Weight 135 kg Visszajelzés küldése Oldalsó panelek Előzmények Mentve

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Kjdpfx Acszdpvgepjdu Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg Kdsdpfx Acez Il Ikspou External Reference: Steinbach & Holler - Lot 62

Condition: used, Year of construction: 2003, operating hours: 56,616 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 3,000 m/min, rapid traverse Y-axis: 3,000 m/min, rapid traverse Z-axis: 3,000 m/min, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 770 mm, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, nominal power (apparent): 40 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 6,500 mm, total width: 4,000 mm, table width: 1,000 mm, table height: 950 mm, table length: 3,220 mm, rotational speed (min.): 30 rpm, rotational speed (max.): 8,000 rpm, overall weight: 21,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 40, tool length: 380 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this used Hedelius BC100-2500 vertical machining center, manufactured in 2003. Key data: Manufacturer: HEDELIUS GmbH Type: BC 100/40-2500 Year of manufacture: 2003 Power requirement / voltage: 40 kW / 400 V / 50 Hz (40kVA) Total weight: 21000 kg Space requirements: Length: 6.50 m Width: 4.00 m Height: 3.70 m Control system: Program input: HEIDENHAIN Kjdpfx Acjz H Hwkepjdu Control: iTNC 530 NC software version: 340422 11 SP5 PLC software version: BC100_V1.2 Operating hours: Control on: 67335 Machine on: 56616 Program runtime: 18289 Travel distances: X-axis: 2500 mm Y-axis: 1000 mm Z-axis: 770 mm Feed rate: X-axis: 3000 mm/min Y-axis: 3000 mm/min Z-axis: 3000 mm/min Rapid traverse: 3000 mm/min Workpiece clamping area - fixed machine table: Length: 3220 mm Width: 1000 mm Work table: T-slots: DIN 650 Slot width: 22 mm Slot spacing: 200 mm Number: 5 Table height: Fixed machine table: 950 mm Tool magazine: Magazine capacity: 40 positions Max. tool diameter: Ø 80 mm (with available empty slots): Ø 125 mm Max. tool length: 380 mm Max. individual weight: 15 kg Total magazine weight: 600 kg Spindle: Speed range: 30 – 8000 rpm Mount: SK 40 Special accessories: Scraper belt conveyor: AME GmbH Total length: ≈ 6660 Height: ≈ 1760 Depth: ≈ 740 Belt filter system: (High-pressure coolant system) Model: PS 120 Tank capacity: 780 l Output: 120 l/min Filter fleece: 670 mm 100 m on roll Length: ≈ 2320 Height: ≈ 1060 Depth: ≈ 850 Control cabinet - cooling unit: Manufacturer: Pfannenberg Type: DTS 7241 Model No.: 217943 Wireless measuring probe: Manufacturer: HEIDENHAIN Model: TS 632 Type: Infrared measuring probe Mount: SK 40 If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 100 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. - Machine Count: 2 units- Control Unit: Siemens SINUMERIK 840D solution line with 24" Multitouch Main Control Panel and HELLER Operation Interface- Working Range (X/Y/Z Axes): 800 / 800 / 800 mm- Drive Package: POWER Package (Standard Drive in X/Y/Z)- Rapid Traverse (X/Y/Z Axes): 50 m/min- Acceleration (X/Y/Z Axes): 5 m/s²- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Feed Axis Servomotors: Incremental Encoders- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Working Unit: PC 100 i Power Cutting Unit (10,000 rpm, 45 kW, 360 Nm)- Tool Taper: HSK-A 100 according to DIN 69 893- Tool Magazine: 100 Slots, Chain Type (HSK-A 100) with Comfort Operator Terminal at Tool Setup Station- Tool Breakage Control: Fast Drill Breakage Control- Collision Monitoring: Damage Minimization Monitoring System- NC Rotary Table (B-Axis): 360,000 x 0.001 deg Indexing, 25 rpm, 8 arcsec Accuracy, 12,000 Nm Max. Tangential Moment, 18,000 Nm Max. Tilting Moment- Plane Transformation: CYCLE 800- Workpiece Setup Station: Manually Rotatable 4 x 90 deg- Workpiece Clamping Interface: 5-way Media Interface, Hydraulic Pressure 200 bar Proportional Technology- Pallets: 2 Special Pallets in Basic Machine (HELLER Drawing AP.205705) with DIN Hole Pattern- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Load (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time: 13 s (without hydraulic clamping) / 13.5 s (with hydraulic clamping)- Coolant & Chip Conveyor: Scraper Belt Conveyor for Wet Machining- Cooling Systems: Precision Water-Air Chiller Unit (Compressor) for Direct Drives of A- and B-Axes, Spindle, and Control Cabinet; Coolant Temperature Control Unit- Mist Extraction: Emulsion Extraction System- Electrical Connection: 3~ 400 V / 50 Hz, Nominal Current 65 A, Short Circuit Rating 9 kA- Total Connected Power: approx. 37 kVA (Machine) + approx. 14 kVA (VRF Coolant Unit)- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered onOptional Machine Equipment:- Special Mount: Multi-Spindle Heads (HELLER Drawing 00.882914 MAGNA)- Tool Measurement: RENISHAW Radio Touch Probe RMP 60 with Receiver & HELLER Measuring Cycles- Coolant Filtration Unit: Vacuum Rotary Filter KNOLL VRF 250 with 50 bar High-Pressure Internal Coolant Supply (IKZ), Working Area Flushing, 1,200 L Tank Capacity Kodoz Ixt Hopfx Acpodu Technical Specification Taper Size HSK 100

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12-month warranty, immediately available, in stock. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers; not available individually due to shared control system! -Drawers extend on telescopic rails -Drawers are locked individually with quick-release fasteners -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow is horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating capacity per oven: 17.4 kW Kdedpfxe Aa Aive Acpeu -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, stress-relieving oven.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,000 h, Bystronic DNE1012FCCB – 500 Watt: a compact and reliable fiber laser cutting machine from Shenzhen DNE Laser (Bystronic Group). The machine is in very good technical condition, has few operating hours, and is ideal for the precise processing of smaller sheet metal formats. The system is available immediately and can be inspected and tested at any time after prior arrangement. Technical data: • Power: 500 W fiber laser • Table dimensions: 800 mm * 1,100 mm • Working area: 600 mm * 1,000 mm Kodpjz Akqcofx Acpodu • including extraction system • approx. 4,000 operating hours • Year of manufacture: 2017 • Connection value: AC 380V / 50Hz

Year of construction: 2018, condition: used, functionality: fully functional, The 2018 Kronen GS10-2 is a versatile and efficient slicing machine suitable for a variety of food processing applications. Designed by the reputable manufacturer Kronen, this equipment is engineered to deliver consistent performance in both small and large-scale operations. With its precise blade adjustments, it accommodates different slicing thicknesses, making it ideal for preparing fruits, vegetables, and other foods with ease. This used model maintains its robust build and reliability, ensuring long-lasting service while maintaining high safety standards. The machine's intuitive design simplifies operation and cleaning, contributing to reduced downtime and increased productivity. With user-friendly controls and efficient processing capability, the Kronen GS10-2 is a valuable addition to any food processing line seeking quality and efficiency. Kjdpezqnlaefx Acpodu

Condition: excellent (used), Year of construction: 2004, operating hours: 76,085 h, functionality: fully functional, machine/vehicle number: 196531, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, displacement volume: 49 cm³, injection pressure: 2,240 bar, injection weight: 45 g, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 2,300 kg, heating capacity: 4.9 kW (6.66 HP), pump power: 15 W, power: 19.9 kW (27.06 HP), Year of manufacture: 2004 Clamping force: 50 tons Distance between columns: 320 x 320 mm Screw diameter: 25 mm Injection volume: 49 ccm Injection weight: 45 g for PS Equipment: 2 x core pull, handling interface, interfaces for hot runner systems Kjdpox Rq Rnofx Acpodu Fully inspected! PRICE REDUCED FROM 7000 TO 5950 EUR!!!

Condition: excellent (used), Year of construction: 2005, Manufacturer: Helmerding Presse Press force: 5,000 kN Kdjdpfszlpm Ijx Acpou Stroke adjustment: 97–400 mm Strokes per minute: 10–80 1/min Tool installation height: 800 mm Ram adjustment: 200 mm Ram area: 3,000 x 1,400 mm Table area: 3,000 x 1,400 mm Motor power: 90 kW Press weight: 120,000 kg Including transfer and coil line.

Year of construction: 2019, condition: like new (used), Complete Ilapak weighing and bagging system. Includes a vibration feeding. incline flighted belt conveyor. 10 head multihued weigher with 2.5 litre s/s buckets. Vegatronic 500 with 300mm jaws with plc for pre printed film. Markum printer and out feed conveyor. Ksdpjywi Daefx Acpsdu

Condition: used, HEIDEN – COMPETENCE IN POWER HEIDEN Infeed Test System ES1.3 High-performance DC test system 500 kW / 3x400V / 1000V 800A Year of manufacture: 2015 · IGBT/PWM · HTS14 digital controller · industrial DC test system Multi-part switchgear system for industrial testing and supply applications with power, control, measurement and monitoring technology. Technical data: Manufacturer: HEIDEN Model: Infeed Test System ES1.3 System type: 3870; Series: HTS14-500-1002 Device No.: 3870.550.01.400; Serial No.: 332732 Year of manufacture: 2015; Operation: DB (continuous operation) Output rated power: 500 kW Efficiency at rated load/voltage: 95 % Power loss: 27 kW; Noise: max. 79 dB(A) @ 1 m Input: Mains: 3/PE/400 V AC ±10 %; 50 Hz ±6 % Power consumption: 526 kVA; Power factor: >0.99 Maximum input current: 854 A @ 400 V Protective fuse: 3× gL/gG 1000 A Cable: 3×185 mm²/phase; PE: 3×95 mm² Output / Control: DC: 10–1000 V adjustable; ±800 A, adjustable current limit Rated power: 500 kW; Cable per pole: 3×150 mm² Measurement accuracy/-resolution U/I: 0.1 % fs / 16 Bit ADC each Control accuracy U/I: 0.1 % fs each Static setpoint tolerance U: approx. max. ±0.1 % fs; I: max. ±0.1 % fs Residual ripple U (ohmic load)/I: 0.1 % fs eff. each Current rise time 10–90 % Iₙ: typ. ;2 ms (standard conditions) Power / Control: HEIDEN HTS14, LCD; Transistor rectifier, PWM, galvanically isolated; IGBT technology IGBT power components: 3×1000 V DC (bill of materials ES1.3) Digital IGBT controller/fast DC controller Storage chokes: 3×1200 µH; thermally 270 A; saturation 400 A DC contactors: 4× single-pole, coil 24 V; Filter charging unit Cooling: forced air Measurement / Safety: LCD panel; Analog display 0–1000 V DC Current transformers and shunts: 600 A/60 mV, class 0.5 Isometer IRDH275B-435; AGH150W up to 1100 V DC Mushroom head PNOZmulti 2 with extensions (bill of materials) Protection class 1 (EN 60950); IP20 (EN 60529) Protective conductor current: ;5 % Iₙ, typ. 50 mA Communication / Features: CAN, Ethernet; CANopen (safety control) Remote indicator relays; Control power supply 24 V DC/10 A (bill of materials) Metal cabinets with ventilation; Operating, power, and control electronics Kdedez Uc Sbepfx Acpsu HTS14-LCD, Analog display, Control elements Cable entry at the bottom; Door hinge on the right (standard) Dimensions / Weights: W×D×H: (1400+1200+1200)×1000×2000 mm ES1.1: 1900 kg; ES1.2: 650 kg; ES1.3: 1050 kg Total: approx. 3600 kg; RAL 7035 Wall distance min. 200 mm; Ceiling min. 300 mm Operating conditions: 0 to +40 °C; RH 5–85 % without condensation With cabinet heating up to 95 % RH without condensation Installation height max. 1000 m above sea level at rated load; Air pressure min. 870 hPa Restricted access; non-flammable base (e.g. concrete) Pollution degree 2 Notes: System data type 3870; Components/quantities according to the bill of materials. 500 kW applies to the entire system. 1000 V and 800 A are not confirmed to be available simultaneously. Cable cross-sections apply to the documented installation conditions. Scope of supply: 1× HEIDEN Infeed Test System with HTS14 and existing cabinet/power components as shown in the pictures. Tools, machines and items not explicitly mentioned are not part of the sale.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, table length: 1,120 mm, table width: 600 mm, Cincinnati Arrow 2-1000 machining center, with Siemens Acramatic 2100 CNC, automatic tool changer, 1120mm x 600mm table, maximum table load of 1000kg, travels X 1016mm, Y 510mm, Z 560mm, with electronic handwheel, BT40 taper, 11/15 hp, maximum spindle speed of 12500 rpm, oil-lubricated spindle, Heidenhain measuring scales on all three axes, automatic tool changer with 21 positions, year 2006, serial number 7049-AQA-KE1134, part number 91204519A, machine in very good condition, machine has never been used for metalworking. Kdjdpfx Acoz Tc Igepou

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas • Company qualification certificate • Roughness protocol Kdedpfx Asylng Ujcpju • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Kodpfox Hn D Dex Acpodu Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Adjustable cross stop, steplessly adjustable from 8 to 150 mm Kdodpfozi A Eljx Acpju Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, load capacity: 10 kg, arm reach: 901 mm, KUKA industrial robots (package of 7 units) Model series: AGILUS-2 Series Type: KR 10 R900-2 (Item no. 001032964) Year of manufacture: 2021 Commissioned: 2022 Quantity: 7 units Kdodpfx Acsxdwygepju Technical data: Payload: 10 kg Reach: 901 mm Net weight: 37 kg Repeatability: ±0.03 mm Protection class: IP65 Application areas: Handling, assembly, packaging, machine tending, small-series production Scope of delivery (per unit): • KUKA industrial robot KR 10 R900-2 • KUKA control unit KRC4 compact • KUKA SmartPad (operator panel) • Connection cable set Condition: • Used, well-maintained from ongoing production • Fully functional • Immediately available

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics Kodox Hn D Rspfx Acpjdu The machine can be viewed under power by appointment.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 59 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller manufacturer: Kuka, For sale is a modern robotic cell with a KUKA industrial robot, model KR 10 R1100-2 / SEL, from the AGILUS-2 series. The system is in very good, like-new condition and is ideally suited for various automation, handling, assembly, or testing applications. The robot is installed inside a robust, fully enclosed safety cabin made of aluminum profiles with large, transparent protective elements. The cell features an integrated linear/positioning unit and a customer-specific gripper or tool mounting. Due to its compact design, the system can be easily integrated into existing production environments. Technical data of the robot: - Manufacturer: KUKA - Type: KR 10 R1100-2 / SEL - Series: AGILUS-2 - Year of manufacture: 03/2025 - Payload: 10 kg - Reach: 1,101 mm - Robot weight: 59 kg - Article number: 0010028076 - Serial number: 4613832 Kdedpfx Acszznzispju - Origin: Germany The offered unit includes the robotic cell shown in the pictures, including the robot, enclosure, and the mechanics or peripherals installed within the cell, as depicted in the images. The system is suitable, for example, for pick-and-place applications, machine loading, parts handling, assembly, testing, and sorting tasks, as well as a basis for customer-specific automation projects. Condition: very well maintained / like new Year of manufacture of the robot: 2025 Inspection: possible by appointment. Subject to prior sale and errors.

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 Kdsdoz Ek Drepfx Acpsu Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control - 1st unit: 428 operating hours - 2nd unit: 418 operating hours

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Kdodpfxsw Ni Ibs Acpju

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, overall weight: 3,000 kg, rotor diameter: 360 mm, rotor length: 1,000 mm, power: 45 kW (61.18 HP), Shredder, ideal for processing pallets, cables, plastics, and more. Equipped with a feed conveyor with magnetic drum for nail separation. Also suitable for plastics thanks to the powerful 45 kW motor. Fitted with hydraulic pusher. Rotor width: 1000 mm. Rotor diameter: 360 mm. Motor: 45 kW. 56 blades on the rotor. Original price was €80,000! Kdodpfsw Td S Njx Acpeu

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 160 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Kjdpfewbt Rrjx Acpodu Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) Kdjdpfx Aez R T Exjcpou - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)